Class 12 PCM . Chemistry . Chemistry Part I . The D and F Block Elements

Chapter 4: The D- And F -Block Elements

Ch 4

Chemistry

Class 12 PCM

Lecture 1

Position In The Periodic Table

Reference video · Lecture 1Position In The Periodic Table

Position and Series of the d- and f-Blocks

Where the blocks are found

  • d-block: Groups 33–1212 occupy the middle of the periodic table, between the ss- and pp-blocks. The (n−1)d(n-1)d orbitals are progressively filled.
  • d-block series: The four rows are 3d3d (ScSc to ZnZn), 4d4d (YY to CdCd), 5d5d (LaLa and HfHf to HgHg), and 6d6d (AcAc and RfRf to CnCn).
  • f-block: The 4f4f and 5f5f orbitals are progressively filled; these elements are shown in a separate panel below the main table.
  • f-block series: The 4f4f series, CeCe to LuLu, are the lanthanoids; the 5f5f series, ThTh to LrLr, are the actinoids.
  • Names: d-block elements are commonly called transition metals; f-block elements are called inner transition metals.
Definition

Transition metal — An IUPAC-defined transition metal has an incomplete dd subshell in its neutral atom or in at least one of its ions.

Applying the definition

  • Why the name: Their properties were originally described as intermediate between those of the ss- and pp-block elements.
  • Group 12 exception: ZnZn, CdCd, and HgHg have d10d^{10} configurations in their ground-state atoms and common ions, so they are not regarded as transition metals.
  • Series end-members: Although ZnZn, CdCd, and HgHg are not transition metals by definition, their chemistry is studied with the transition elements as end-members of their respective series.
  • Examples: ScSc is a transition element because its ground-state atom has 3d13d^1; ZnZn is not because its atom and common ion have 3d103d^{10}.
  • Silver: Although a ground-state AgAg atom has 4d104d^{10}, an ion such as Ag2+Ag^{2+} has an incomplete dd subshell (4d94d^9), so silver meets the definition.

Electronic Configurations of the d-Block

General outer-orbital configuration
(n−1)d1−10ns1−2(n-1)d^{1-10}ns^{1-2}

The (n−1)d(n-1)d subshell fills across a series; small energy differences between (n−1)d(n-1)d and nsns orbitals cause exceptions.

Important configurations and exceptions

  • Meaning: (n−1)d(n-1)d is the inner dd subshell, which may contain 11–1010 electrons; the outer nsns subshell generally contains 11 or 22.
  • Chromium: CrCr is 3d54s13d^5 4s^1, not 3d44s23d^4 4s^2; the half-filled 3d3d subshell is relatively stable.
  • Copper: CuCu is 3d104s13d^{10}4s^1, not 3d94s23d^9 4s^2; a completely filled 3d3d subshell is relatively stable.
  • Palladium: PdPd is an exception with configuration 4d105s04d^{10}5s^0.
Ground-state outer-orbital electron counts
Series and elements (in order)(n−1)d(n-1)d electron countsnsns electron counts
3d3d: Sc,Ti,V,Cr,Mn,Fe,Co,Ni,Cu,ZnSc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn1,2,3,5,5,6,7,8,10,101, 2, 3, 5, 5, 6, 7, 8, 10, 102,2,2,1,2,2,2,2,1,22, 2, 2, 1, 2, 2, 2, 2, 1, 2
4d4d: Y,Zr,Nb,Mo,Tc,Ru,Rh,Pd,Ag,CdY, Zr, Nb, Mo, Tc, Ru, Rh, Pd, Ag, Cd1,2,4,5,6,7,8,10,10,101, 2, 4, 5, 6, 7, 8, 10, 10, 102,2,1,1,1,1,1,0,1,22, 2, 1, 1, 1, 1, 1, 0, 1, 2
5d5d: La,Hf,Ta,W,Re,Os,Ir,Pt,Au,HgLa, Hf, Ta, W, Re, Os, Ir, Pt, Au, Hg1,2,3,4,5,6,7,9,10,101, 2, 3, 4, 5, 6, 7, 9, 10, 102,2,2,2,2,2,2,1,1,22, 2, 2, 2, 2, 2, 2, 1, 1, 2
6d6d: Ac,Rf,Db,Sg,Bh,Hs,Mt,Ds,Rg,CnAc, Rf, Db, Sg, Bh, Hs, Mt, Ds, Rg, Cn1,2,3,4,5,6,7,8,10,101, 2, 3, 4, 5, 6, 7, 8, 10, 102,2,2,2,2,2,2,2,1,22, 2, 2, 2, 2, 2, 2, 2, 1, 2

Characteristic Features and Similarities

  • Orbital influence: d orbitals extend relatively close to an atom’s outer region, so they are influenced by the surroundings and can also affect nearby atoms or molecules.
  • Partly filled d subshells: Transition elements commonly show variable oxidation states, coloured ions, complex formation with ligands, catalytic properties, and paramagnetic behaviour.
  • Similar configurations: Ions with the same dnd^n configuration, where n=1n=1–99, can have similar magnetic and electronic properties.
  • Similarity pattern: Transition elements show stronger similarities across a horizontal series than non-transition elements do, although similarities within groups also occur.
  • Examples and uses: FeFe, CuCu, and TiTi are important industrial metals; AgAg, AuAu, and PtPt are precious metals. ThTh, PaPa, and UU are important sources of nuclear energy.

Why is scandium a transition element but zinc is not?

Answer: ScSc has an incomplete 3d3d subshell (3d13d^1) in its ground-state atom. ZnZn has a complete 3d103d^{10} subshell in its atom and common ion, so it does not satisfy the definition.

Why is silver considered a transition element even though its ground-state atom has a filled d subshell?

Answer: The definition includes an incomplete dd subshell in an ion. For example, Ag2+Ag^{2+} has 4d94d^9, so silver qualifies.

Quick recap

  • The d-block is in groups 33–1212; the f-block sits separately below the main table.
  • The four d-block series are 3d3d, 4d4d, 5d5d, and 6d6d; the f-block series are lanthanoids and actinoids.
  • A transition metal has an incomplete d subshell in its atom or at least one ion.
  • ZnZn, CdCd, and HgHg are excluded by the definition because their atoms and common ions have d10d^{10} configurations.
  • The general configuration is (n−1)d1−10ns1−2(n-1)d^{1-10}ns^{1-2}, with notable exceptions CrCr, CuCu, and PdPd.
  • Partly filled d subshells help explain variable oxidation states, coloured ions, complex formation, catalysis, and paramagnetism.
Lecture 2

General Properties Of The Transition Elements (D-Block)

Reference video · Lecture 2General Properties Of The Transition Elements (D-Block)

Physical Properties

Trends in melting point and atomisation
PropertyTrend or explanation
Melting pointsGenerally rise to a maximum near d5d^5, then decrease across a series; MnMn and TcTc show anomalous values.
Zinc atomisationZnZn has the lowest enthalpy of atomisation in the first series: 126 kJ mol−1126\ \mathrm{kJ\ mol^{-1}}.
Zinc bondingIts 3d104s23d^{10}4s^2 configuration has no unpaired electrons, so its interatomic bonding is comparatively weak.
Melting-point trends across the 3d, 4d and 5d transition series.
Melting-point trends across the 3d, 4d and 5d transition series.
Enthalpy-of-atomisation trends across the transition-element series.
Enthalpy-of-atomisation trends across the transition-element series.

Atomic and Ionic Sizes

Atomic-radius trends across the first, second and third transition series.
Atomic-radius trends across the first, second and third transition series.

Cause of lanthanoid contraction

  1. Electrons fill the 4f orbitals before the 5d series begins.
  2. 4f electrons shield one another imperfectly.
  3. Increasing nuclear charge pulls the electron cloud inward, reducing atomic radii.
  4. This contraction offsets the expected increase in size, making corresponding 4d and 5d atoms nearly equal in radius.

Ionisation Enthalpies

Exchange Energy and Ionisation Irregularities

  • Exchange energy: In degenerate orbitals, parallel-spin electrons can exchange positions; the stabilising exchange energy increases with the number of possible parallel-spin pairs.
  • Stable occupancy: Hund’s rule favours the greatest possible number of singly occupied orbitals with parallel spins; a half-filled d5d^5 subshell is especially stable.
  • Ionisation effect: Removing an electron from a stable d5d^5 arrangement disrupts this stabilisation and can require more energy.
  • Second ionisation comparison: Mn+Mn^+ is 3d54s13d^5 4s^1 and can lose a 4s4s electron to form Mn2+Mn^{2+} with d5d^5; Cr+Cr^+ is d5d^5, so its ionisation disrupts d5d^5. Thus the second ionisation enthalpy of MnMn is lower than that of CrCr.
  • Third ionisation comparison: Mn2+Mn^{2+} is d5d^5, whereas Fe2+Fe^{2+} is d6d^6. Forming Fe3+Fe^{3+} gives stable d5d^5, so the third ionisation enthalpy of FeFe is lower than that of MnMn.

Formation of Common Oxidation States

Why are corresponding 4d and 5d transition elements similar in size?

Answer: Lanthanoid contraction, caused by imperfect shielding by 4f electrons, offsets the expected increase in size from 4d to 5d. For example, ZrZr is 160 pm160\ \mathrm{pm} and HfHf is 159 pm159\ \mathrm{pm}.

Why does the third ionisation enthalpy of Fe fall below that of Mn?

Answer: Fe2+Fe^{2+} has a d6d^6 configuration; removing one electron forms stable Fe3+Fe^{3+} with d5d^5. By contrast, removing an electron from stable Mn2+Mn^{2+} with d5d^5 disrupts that configuration.

Why are the second ionisation enthalpies of Cr and Cu unusually high?

Answer: The ions Cr+Cr^+ and Cu+Cu^+ have relatively stable d5d^5 and d10d^{10} configurations, respectively; removing an electron disrupts these configurations.

Quick recap

  • Transition metals are generally hard, conductive, low-volatility metals with high melting points and high enthalpies of atomisation; ZnZn, CdCd and HgHg are notable exceptions to several trends.
  • Melting points generally peak near d5d^5 and then decline; MnMn and TcTc are anomalous, and ZnZn has the lowest first-series atomisation enthalpy at 126 kJ mol−1126\ \mathrm{kJ\ mol^{-1}}.
  • Atomic and same-charge ionic radii decrease gradually across a series because d-electrons shield the increasing nuclear charge imperfectly.
  • Lanthanoid contraction makes corresponding 4d and 5d elements nearly equal in size, such as ZrZr and HfHf.
  • First ionisation enthalpies rise only slightly across the 3d series; second and third generally rise more, with exceptions associated with stable d5d^5 configurations.
  • Exchange energy stabilises maximum parallel-spin occupancy; the resulting stability of d5d^5 and d10d^{10} helps explain ionisation-enthalpy irregularities and common oxidation states.
Lecture 3

Oxidation States

Reference video · Lecture 3Oxidation States

Variable Oxidation States

Stability patterns in oxidation states

  • Heavier group 6 metals: \ceMo(VI)\ce{Mo(VI)} and \ceW(VI)\ce{W(VI)} are more stable than \ceCr(VI)\ce{Cr(VI)}.
  • Oxidising behaviour: Acidic dichromate containing \ceCr(VI)\ce{Cr(VI)} is a strong oxidising agent; \ceMoO3\ce{MoO3} and \ceWO3\ce{WO3} are not.
  • Low oxidation states: Ligands with both σ\sigma-donor and π\pi-acceptor character can stabilise low states; Ni and Fe are zero-valent in \ceNi(CO)4\ce{Ni(CO)4} and \ceFe(CO)5\ce{Fe(CO)5}.

Name a transition element that does not exhibit variable oxidation states.

Answer: Scandium generally exhibits only the +3+3 oxidation state.

Standard Electrode Potentials for M²⁺/M

Trends and explanation

  • Meaning: E∘(\ceM2+/M)E^\circ(\ce{M^{2+}/M}) is the standard reduction potential for converting aqueous \ceM2+\ce{M^{2+}} ions to the metal.
  • Across the series: Values generally become less negative as the sum of the first and second ionisation enthalpies increases.
  • Irregular values: Mn, Ni and Zn have more negative potentials than the broad trend suggests; sublimation enthalpy and hydration enthalpy also affect the values.
  • Copper: Its positive potential, +0.34 V+0.34\ \mathrm{V}, reflects the high energy needed to form \ceCu2+(aq)\ce{Cu^{2+}(aq)} relative to the hydration energy gained.
  • Acid reaction: Cu does not liberate \ceH2\ce{H2} from ordinary acids; oxidising acids such as nitric acid and hot concentrated sulphuric acid can react with it.
Thermochemical data and standard potentials for the first-row transition metals
MΔaH∘\Delta_a H^\circΔiH1∘\Delta_i H_1^\circΔiH2∘\Delta_i H_2^\circΔhydH∘(\ceM2+)\Delta_{hyd} H^\circ(\ce{M^{2+}})E∘(\ceM2+/M)E^\circ(\ce{M^{2+}/M}) (V)
Ti4696561309−1866−1.63
V5156501414−1895−1.18
Cr3986531592−1925−0.90
Mn2797171509−1862−1.18
Fe4187621561−1998−0.44
Co4277581644−2079−0.28
Ni4317361752−2121−0.25
Cu3397451958−2121+0.34
Zn1309061734−2059−0.76
Observed and calculated standard electrode potentials, E^(M²+/M), from Ti to Zn.
Observed and calculated standard electrode potentials, E∘(\ceM2+/M)E^\circ(\ce{M^{2+}/M}), from Ti to Zn.

Redox behaviour linked to stable configurations

  • \ceCr2+\ce{Cr^{2+}} as a reducing agent: It is readily oxidised from d4d^4 to d3d^3, giving a half-filled t2gt_{2g} level.
  • \ceMn3+\ce{Mn^{3+}} as an oxidising agent: Reduction to \ceMn2+\ce{Mn^{2+}} produces the particularly stable half-filled d5d^5 configuration.

Standard Electrode Potentials for M³⁺/M²⁺

Why the potentials vary

  • Sc: The low potential reflects the stability of \ceSc3+\ce{Sc^{3+}}, which has a noble-gas configuration.
  • Zn: The high potential is associated with removing an electron from the stable d10d^{10} configuration of \ceZn2+\ce{Zn^{2+}}.
  • Mn: The comparatively high value reflects the stability of \ceMn2+(d5)\ce{Mn^{2+}}(d^5).
  • Fe: The comparatively low value reflects the extra stability of \ceFe3+(d5)\ce{Fe^{3+}}(d^5).
  • V: Its comparatively low value is associated with the stability of \ceV2+\ce{V^{2+}}, which has a half-filled t2gt_{2g} level.

Stability of Higher Oxidation States

Halides

  • Highest states shown: The 3d series reaches high oxidation states in compounds such as \ceTiX4\ce{TiX4}, \ceVF5\ce{VF5} and \ceCrF6\ce{CrF6}.
  • Manganese: The +7+7 state is not found in simple halides, but is represented by \ceMnO3F\ce{MnO3F}.
  • Beyond Mn: The only noted trihalides are \ceFeX3\ce{FeX3} and \ceCoF3\ce{CoF3}.
  • Why fluorine stabilises high states: It can provide high lattice energy, as in \ceCoF3\ce{CoF3}, or strong covalent bond enthalpies, as in \ceVF5\ce{VF5} and \ceCrF6\ce{CrF6}.
  • Hydrolysis: Halides of V(V) other than \ceVF5\ce{VF5} hydrolyse to oxohalides \ceVOX3\ce{VOX3}.
  • Low-state fluorides: Fluorides in low oxidation states are unstable; examples include \ceVX2\ce{VX2} where X=\ceCl,\ceBr,\ceIX=\ce{Cl},\ce{Br},\ce{I}.
Important stable halides of the 3d metals
Oxidation stateRepresentative halides
+6+6\ceCrF6\ce{CrF6}
+5+5\ceVF5,\ceCrF5\ce{VF5}, \ce{CrF5}
+4+4\ceTiX4,\ceVX4,\ceCrX4,\ceMnF4\ce{TiX4}, \ce{VX4}, \ce{CrX4}, \ce{MnF4}
+3+3\ceTiX3,\ceVX3,\ceCrX3,\ceMnF3,\ceFeX3,\ceCoF3\ce{TiX3}, \ce{VX3}, \ce{CrX3}, \ce{MnF3}, \ce{FeX3}, \ce{CoF3}
+2+2\ceTiX2,\ceVX2,\ceCrX2,\ceMnX2,\ceFeX2,\ceCoX2,\ceNiX2,\ceCuX2,\ceZnX2\ce{TiX2}, \ce{VX2}, \ce{CrX2}, \ce{MnX2}, \ce{FeX2}, \ce{CoX2}, \ce{NiX2}, \ce{CuX2}, \ce{ZnX2}
+1+1\ceCuX\ce{CuX}

Oxides and oxocations

  • Oxides: Oxygen stabilises high oxidation states; the highest oxide states rise to +7+7 in \ceMn2O7\ce{Mn2O7}, broadly matching the group number up to Mn.
  • Beyond Group 7: Higher oxides of Fe than \ceFe2O3\ce{Fe2O3} are not known; ferrate(VI), \ceFeO42−\ce{FeO4^{2-}}, forms in alkaline media but decomposes to \ceFe2O3\ce{Fe2O3} and \ceO2\ce{O2}.
  • Oxocations: Oxygen stabilises V(V) as \ceVO2+\ce{VO2+}, V(IV) as \ceVO2+\ce{VO^{2+}}, and Ti(IV) as \ceTiO2+\ce{TiO^{2+}}.
  • Oxygen versus fluorine: Oxygen can stabilise higher states than fluorine; for example, manganese reaches +7+7 in \ceMn2O7\ce{Mn2O7} but only +4+4 in \ceMnF4\ce{MnF4}.
  • Reason: Oxygen forms multiple bonds to metals. In covalent \ceMn2O7\ce{Mn2O7}, each Mn is tetrahedrally surrounded by O atoms, including a Mn–O–Mn bridge.
  • Tetrahedral oxoanions: \ce[MO4]n−\ce{[MO4]^{n-}} ions occur for V(V), Cr(VI), and Mn(V), Mn(VI) and Mn(VII).
Representative oxides of the 3d metals
Oxidation stateRepresentative oxides
+7+7\ceMn2O7\ce{Mn2O7}
+6+6\ceCrO3\ce{CrO3}
+5+5\ceV2O5\ce{V2O5}
+4+4\ceTiO2,\ceV2O4,\ceCrO2,\ceMnO2\ce{TiO2}, \ce{V2O4}, \ce{CrO2}, \ce{MnO2}
+3+3\ceSc2O3,\ceTi2O3,\ceV2O3,\ceCr2O3,\ceMn2O3,\ceFe2O3\ce{Sc2O3}, \ce{Ti2O3}, \ce{V2O3}, \ce{Cr2O3}, \ce{Mn2O3}, \ce{Fe2O3}
Mixed oxides\ceMn3O4,\ceFe3O4,\ceCo3O4\ce{Mn3O4}, \ce{Fe3O4}, \ce{Co3O4}
+2+2\ceTiO,\ceVO,\ceCrO,\ceMnO,\ceFeO,\ceCoO,\ceNiO,\ceCuO,\ceZnO\ce{TiO}, \ce{VO}, \ce{CrO}, \ce{MnO}, \ce{FeO}, \ce{CoO}, \ce{NiO}, \ce{CuO}, \ce{ZnO}
+1+1\ceCu2O\ce{Cu2O}

Disproportionation and oxidising power

  • Copper(I): Many \ceCu+\ce{Cu+} compounds disproportionate in aqueous solution; \ceCu2+(aq)\ce{Cu^{2+}(aq)} is favoured because its hydration enthalpy is much more negative than that of \ceCu+(aq)\ce{Cu+(aq)}.
  • Oxidising strength: \ceVO2+<Cr2O72−<MnO4−\ce{VO2+ < Cr2O7^{2-} < MnO4-} in oxidising power because the reduced products become increasingly stable.
\ce2Cu+−>Cu2++Cu\ce{2Cu+ -> Cu^{2+} + Cu}
\ce3MnO42−+4H+−>2MnO4−+MnO2+2H2O\ce{3MnO4^{2-} + 4H+ -> 2MnO4- + MnO2 + 2H2O}

Reactivity and Redox Character

Reaction with acids and redox trends

  • Reactivity: First-row transition metals, except Cu, are generally oxidised by 1 M1\ \mathrm{M} \ceH+\ce{H+}, though reaction rates can be slow.
  • Passivation: Ti and V can be practically passive towards dilute, non-oxidising acids at room temperature.
  • Divalent ions: The trend to form \ceM2+\ce{M^{2+}} generally decreases across the series as the sum of the first two ionisation enthalpies increases.
  • Exceptions: Half-filled d5d^5 in \ceMn2+\ce{Mn^{2+}} and filled d10d^{10} in \ceZn2+\ce{Zn^{2+}} affect their potentials; the Ni value is linked to its very negative hydration enthalpy.
  • Strong oxidisers: \ceMn3+\ce{Mn^{3+}} and \ceCo3+\ce{Co^{3+}} are strong oxidising agents in aqueous solution.
  • Strong reducers: \ceTi2+\ce{Ti^{2+}}, \ceV2+\ce{V^{2+}} and \ceCr2+\ce{Cr^{2+}} can reduce \ceH+\ce{H+} to hydrogen.
\ce2Cr2+(aq)+2H+(aq)−>2Cr3+(aq)+H2(g)\ce{2Cr^{2+}(aq) + 2H+(aq) -> 2Cr^{3+}(aq) + H2(g)}

Irregular electrode-potential examples

  • \ceMn3+/Mn2+\ce{Mn^{3+}/Mn^{2+}} versus \ceCr3+/Cr2+\ce{Cr^{3+}/Cr^{2+}} and \ceFe3+/Fe2+\ce{Fe^{3+}/Fe^{2+}}: The much more positive Mn potential is mainly due to the large third ionisation enthalpy needed to change Mn from d5d^5 to d4d^4; this also makes Mn(III) relatively unimportant.

Magnetic Properties

Magnetic behaviour
TypeResponse to magnetic field
DiamagneticRepelled by the applied field.
ParamagneticAttracted; arises from unpaired electrons.
FerromagneticVery strongly attracted; an extreme form of paramagnetism.

Spin-only magnetic moment

  • Origin: Unpaired electrons have magnetic moments associated with spin and orbital angular momentum.
  • First-row ions: Orbital contributions are effectively quenched, so the magnetic moment is estimated using the spin-only formula.
  • Trend: More unpaired electrons generally means a larger magnetic moment; a single unpaired electron gives about 1.73 BM1.73\ \mathrm{BM}.
Spin-only magnetic moment
μ=n(n+2)\mu = \sqrt{n(n+2)}

Use nn for the number of unpaired electrons; μ\mu is measured in Bohr magnetons (BM).

Representative calculated spin-only magnetic moments
IonConfigurationUnpaired electronsMoment (BM)
\ceSc3+\ce{Sc^{3+}}3d03d^000
\ceTi3+\ce{Ti^{3+}}3d13d^111.73
\ceV2+\ce{V^{2+}}3d33d^333.87
\ceCr2+\ce{Cr^{2+}}3d43d^444.90
\ceMn2+\ce{Mn^{2+}}3d53d^555.92
\ceFe2+\ce{Fe^{2+}}3d63d^644.90
\ceCo2+\ce{Co^{2+}}3d73d^733.87
\ceNi2+\ce{Ni^{2+}}3d83d^822.84
\ceCu2+\ce{Cu^{2+}}3d93d^911.73
\ceZn2+\ce{Zn^{2+}}3d103d^{10}00

Calculate the spin-only magnetic moment of an aqueous divalent ion with atomic number 25.

Answer: The ion has a d5d^5 configuration with five unpaired electrons, so μ=5(5+2)=5.92 BM\mu=\sqrt{5(5+2)}=5.92\ \mathrm{BM}.

Colour of Transition-Metal Ions

Origin of colour

  • Absorption: An electron can be excited from a lower-energy dd orbital to a higher-energy dd orbital by absorbing light.
  • Observed colour: The solution appears the complementary colour of the absorbed light.
  • Ligand effect: The absorbed frequency depends on the ligand; in aqueous ions, water is the ligand.
  • Colourless ions: Ions with d0d^0 or d10d^{10} configurations are generally colourless because no relevant dd–dd excitation occurs.
Colours of selected aqueous first-row transition-metal ions.
Colours of selected aqueous first-row transition-metal ions.
Colours of selected aquated transition-metal ions
ConfigurationIonColour
3d03d^0\ceSc3+\ce{Sc^{3+}}, \ceTi4+\ce{Ti^{4+}}Colourless
3d13d^1\ceTi3+\ce{Ti^{3+}}Purple
3d13d^1\ceV4+\ce{V^{4+}}Blue
3d23d^2\ceV3+\ce{V^{3+}}Green
3d33d^3\ceV2+\ce{V^{2+}}, \ceCr3+\ce{Cr^{3+}}Violet
3d43d^4\ceMn3+\ce{Mn^{3+}}Violet
3d43d^4\ceCr2+\ce{Cr^{2+}}Blue
3d53d^5\ceMn2+\ce{Mn^{2+}}Pink
3d53d^5\ceFe3+\ce{Fe^{3+}}Yellow
3d63d^6\ceFe2+\ce{Fe^{2+}}Green
3d63d^6\ceCo3+\ce{Co^{3+}}Blue
3d73d^7\ceCo2+\ce{Co^{2+}}Pink
3d83d^8\ceNi2+\ce{Ni^{2+}}Green
3d93d^9\ceCu2+\ce{Cu^{2+}}Blue
3d103d^{10}\ceZn2+\ce{Zn^{2+}}Colourless

Formation of Complex Compounds

Definition

Complex compound — A compound in which a metal ion binds several anions or neutral molecules to form a complex species with characteristic properties.

Why transition metals form complexes

  • Reasons: Transition-metal ions are comparatively small, have high ionic charges and possess available dd orbitals for bond formation.
  • Examples: \ce[Fe(CN)6]3−\ce{[Fe(CN)6]^{3-}}, \ce[Fe(CN)6]4−\ce{[Fe(CN)6]^{4-}}, \ce[Cu(NH3)4]2+\ce{[Cu(NH3)4]^{2+}} and \ce[PtCl4]2−\ce{[PtCl4]^{2-}}.

Catalytic Properties

How transition metals catalyse reactions

  • Why active: Transition metals can adopt multiple oxidation states and form complexes.
  • Surface catalysis: Reactants bond to the catalyst surface, becoming concentrated there; their bonds weaken and activation energy falls.
  • Examples: \ceV2O5\ce{V2O5} catalyses the Contact Process; finely divided Fe is used in the Haber Process; Ni is used in catalytic hydrogenation.
  • Redox catalysis: Changing oxidation state allows a metal ion to transfer electrons through successive reaction steps.
\ce2I−+S2O82−−>I2+2SO42−\ce{2I- + S2O8^{2-} -> I2 + 2SO4^{2-}}
\ce2Fe3++2I−−>2Fe2++I2\ce{2Fe^{3+} + 2I- -> 2Fe^{2+} + I2}
\ce2Fe2++S2O82−−>2Fe3++2SO42−\ce{2Fe^{2+} + S2O8^{2-} -> 2Fe^{3+} + 2SO4^{2-}}

Interstitial Compounds

Definition

Interstitial compound — A compound formed when small atoms such as H, C or N occupy spaces within a metal crystal lattice.

Properties and examples

  • Composition: Usually non-stoichiometric and neither typically ionic nor covalent; their formulas do not imply normal metal oxidation states.
  • Examples: \ceTiC\ce{TiC}, \ceMn4N\ce{Mn4N}, \ceFe3H\ce{Fe3H}, \ceVH0.56\ce{VH0.56} and \ceTiH1.7\ce{TiH1.7}.
  • Properties: They usually have high melting points, are hard, retain metallic conductivity and are chemically inert.

Alloy Formation

Definition

Alloy — A blend of metals; it may form a homogeneous solid solution with atoms of one metal randomly distributed among those of another.

Alloy properties and examples

  • Formation condition: Solid-solution alloys commonly form when the component metallic radii differ by about 15%15\% or less.
  • Transition-metal alloys: Similar atomic sizes make these metals readily alloy; the alloys are often hard and have high melting points.
  • Steel alloys: Cr, V, W, Mo and Mn are used to make steels and stainless steel.
  • Other important alloys: Brass is Cu–Zn; bronze is Cu–Sn.

Why is \ceCu+\ce{Cu+} unstable in aqueous solution?

Answer: It disproportionates to \ceCu2+\ce{Cu^{2+}} and Cu. The more negative hydration enthalpy of aqueous \ceCu2+\ce{Cu^{2+}} more than compensates for the second ionisation enthalpy of Cu.

Quick recap

  • Transition metals show variable oxidation states because nsns and (n−1)d(n-1)d electron energies are close.
  • Electrode potentials depend on ionisation, sublimation and hydration enthalpies, as well as the stability of electronic configurations.
  • Fluorides and oxides can stabilise high oxidation states; oxygen often supports higher states through multiple bonding.
  • Unpaired dd electrons determine paramagnetism and the spin-only moment μ=n(n+2)\mu=\sqrt{n(n+2)}.
  • Many transition-metal ions are coloured due to dd-orbital excitations; d0d^0 and d10d^{10} ions are generally colourless.
  • Complex formation, variable oxidation states, interstitial compounds and alloy formation are characteristic transition-metal behaviours.
Lecture 4

Some Important Compounds Of Transition Elements

Reference video · Lecture 4Some Important Compounds Of Transition Elements

Oxides and Oxoanions of Transition Metals

Trends in Oxides

  • Formation: Transition-metal oxides generally form when metals react with oxygen at high temperatures.
  • Lower oxides: Except scandium, the metals form ionic MOMO oxides.
  • Maximum oxidation state: In oxides, it generally reaches the group number from scandium to manganese; above group 7, iron has no known oxide higher than \ceFe2O3\ce{Fe2O3}.
  • Character: Increasing metal oxidation state decreases ionic character. Higher oxides are usually acidic; \ceMn2O7\ce{Mn2O7} is a covalent green oil, while \ceCrO3\ce{CrO3} and \ceV2O5\ce{V2O5} have relatively low melting points.
Oxide Acid–Base Character and Oxocations
Oxide / speciesCharacter or reaction
\ceV2O3\ce{V2O3}Basic; vanadium oxides become less basic as oxidation state rises.
\ceV2O4\ce{V2O4}Less basic; dissolves in acids to give \ceVO2+\ce{VO^{2+}} salts.
\ceV2O5\ce{V2O5}Mainly acidic but amphoteric; reacts with acids and alkalis, forming \ceVO2+\ce{VO2+} and \ceVO43−\ce{VO4^{3-}} salts, respectively.
\ceCrO\ce{CrO} / \ceCr2O3\ce{Cr2O3}\ceCrO\ce{CrO} is basic; \ceCr2O3\ce{Cr2O3} is amphoteric.
\ceMn2O7\ce{Mn2O7} / \ceCrO3\ce{CrO3}Acidic oxides; \ceMn2O7\ce{Mn2O7} forms \ceHMnO4\ce{HMnO4}, while \ceCrO3\ce{CrO3} forms \ceH2CrO4\ce{H2CrO4} and \ceH2Cr2O7\ce{H2Cr2O7}.
Oxo cations\ceVO2+\ce{VO2+} contains \ceV(V)\ce{V(V)}; \ceVO2+\ce{VO^{2+}} contains \ceV(IV)\ce{V(IV)}; \ceTiO2+\ce{TiO^{2+}} contains \ceTi(IV)\ce{Ti(IV)}.
\ceMn2O7+H2O−>2HMnO4\ce{Mn2O7 + H2O -> 2HMnO4}
The acidic oxide \ceMn2O7\ce{Mn2O7} forms permanganic acid, \ceHMnO4\ce{HMnO4}.
\ceCrO3+H2O−>H2CrO4\ce{CrO3 + H2O -> H2CrO4}
\ceCrO3\ce{CrO3} forms both chromic acid and dichromic acid.
\ce2CrO3+H2O−>H2Cr2O7\ce{2CrO3 + H2O -> H2Cr2O7}
A second acid formed from \ceCrO3\ce{CrO3} is dichromic acid.

Potassium Dichromate

Preparation and Uses

  • Uses: Orange \ceK2Cr2O7\ce{K2Cr2O7} is an oxidant, a primary standard in volumetric analysis, and is used in the leather industry and preparation of azo compounds.
  • Ore processing: Chromite ore, \ceFeCr2O4\ce{FeCr2O4}, is fused with sodium or potassium carbonate in excess air to form chromate.
  • Crystallisation: Acidifying yellow sodium chromate solution gives sodium dichromate; adding \ceKCl\ce{KCl} then crystallises orange potassium dichromate.
  • Solubility: Sodium dichromate is more soluble in water than potassium dichromate, enabling separation by crystallisation.
\ce4FeCr2O4+8Na2CO3+7O2−>8Na2CrO4+2Fe2O3+8CO2\ce{4FeCr2O4 + 8Na2CO3 + 7O2 -> 8Na2CrO4 + 2Fe2O3 + 8CO2}
Fusion in air forms sodium chromate.
\ce2CrO42−+2H+−>Cr2O72−+H2O\ce{2CrO4^2- + 2H+ -> Cr2O7^2- + H2O}
Acidic conditions shift yellow chromate to orange dichromate.
\ceNa2Cr2O7+2KCl−>K2Cr2O7+2NaCl\ce{Na2Cr2O7 + 2KCl -> K2Cr2O7 + 2NaCl}
Potassium chloride converts soluble sodium dichromate to less-soluble potassium dichromate.
Chromate and dichromate ion structures; dichromate bond lengths and bond angle.
Chromate and dichromate ion structures; dichromate bond lengths and bond angle.

Chromate–Dichromate Equilibrium and Oxidising Action

  • Interconversion: pH controls the interconversion: acid favours dichromate, while alkali favours chromate. Chromium has the same oxidation state, +6+6, in both ions.
  • Oxidant: In acid, dichromate is reduced to \ceCr3+\ce{Cr^{3+}}; its standard reduction potential is E∘=1.33 VE^\circ=1.33\,\mathrm{V}.
  • Oxidations: Acidified dichromate oxidises iodide to iodine, hydrogen sulphide to sulphur, tin(II) to tin(IV), and iron(II) to iron(III).
  • Relative use: Sodium dichromate is more soluble and widely used as an organic oxidant; potassium dichromate is useful as a primary standard.
\ceCr2O72−+2OH−−>2CrO42−+H2O\ce{Cr2O7^2- + 2OH- -> 2CrO4^2- + H2O}
Hydroxide shifts dichromate back to chromate.
\ceCr2O72−+14H++6e−−>2Cr3++7H2O\ce{Cr2O7^2- + 14H+ + 6e- -> 2Cr^3+ + 7H2O}
The six-electron reduction is the basis of dichromate's oxidising action.
\ceCr2O72−+14H++6Fe2+−>2Cr3++7H2O+6Fe3+\ce{Cr2O7^2- + 14H+ + 6Fe^2+ -> 2Cr^3+ + 7H2O + 6Fe^3+}
Representative overall ionic equation in acidic solution.

Potassium Permanganate

Preparation and Properties

  • Preparation: Alkaline oxidative fusion of \ceMnO2\ce{MnO2} with \ceKOH\ce{KOH} and an oxidant such as air or \ceKNO3\ce{KNO3} forms green manganate; electrolytic oxidation gives permanganate commercially.
  • Disproportionation: Manganate changes to permanganate and manganese dioxide in neutral or acidic solution.
  • Appearance and solubility: \ceKMnO4\ce{KMnO4} forms dark-purple, almost-black crystals; it dissolves to a limited extent (6.4 g per 100 g water at 293 K).
  • Heating: At 513 K, it decomposes to potassium manganate, manganese dioxide and oxygen.
  • Structure and magnetism: Manganate and permanganate ions are tetrahedral. Manganate has one unpaired electron and is paramagnetic; permanganate has none and is diamagnetic. Both have oxygen-to-manganese pp–dd π\pi bonding.
\ce2MnO2+4KOH+O2−>2K2MnO4+2H2O\ce{2MnO2 + 4KOH + O2 -> 2K2MnO4 + 2H2O}
Oxidative fusion forms green potassium manganate.
\ce3MnO42−+4H+−>2MnO4−+MnO2+2H2O\ce{3MnO4^2- + 4H+ -> 2MnO4- + MnO2 + 2H2O}
Acidic solution produces permanganate and manganese dioxide.
\ce2KMnO4−>[513K]K2MnO4+MnO2+O2\ce{2KMnO4 ->[513 K] K2MnO4 + MnO2 + O2}
Heating at 513 K decomposes potassium permanganate.
Tetrahedral manganate ion (green) and permanganate ion (purple).
Tetrahedral manganate ion (green) and permanganate ion (purple).
Permanganate Reduction Products by Medium
Medium / productReduction half-reactionE∘E^\circ
Manganate ion\ceMnO4−+e−−>MnO42−\ce{MnO4- + e- -> MnO4^2-}+0.56 V+0.56\,\mathrm{V}
Manganese dioxide\ceMnO4−+4H++3e−−>MnO2+2H2O\ce{MnO4- + 4H+ + 3e- -> MnO2 + 2H2O}+1.69 V+1.69\,\mathrm{V}
Manganese(II) ion\ceMnO4−+8H++5e−−>Mn2++4H2O\ce{MnO4- + 8H+ + 5e- -> Mn^{2+} + 4H2O}+1.52 V+1.52\,\mathrm{V}

Oxidising Action and Reaction Conditions

  • Medium matters: Hydrogen-ion concentration controls the permanganate reduction product and therefore the oxidation reaction.
  • Kinetics: Redox potential alone does not determine the observed rate. Oxidation of water by permanganate is extremely slow unless warmed or catalysed by manganese(II) ions.
  • Acidic oxidations: Permanganate oxidises iodide to iodine, iron(II) to iron(III), oxalate to carbon dioxide, hydrogen sulphide to sulphur, sulphite to sulphate, and nitrite to nitrate.
  • Neutral or faintly alkaline oxidations: Iodide becomes iodate; thiosulphate becomes sulphate; manganese(II) becomes manganese dioxide. Zinc sulphate or zinc oxide catalyses the last reaction.
  • Caution: Permanganate titrations with hydrochloric acid are unsuitable because hydrochloric acid is oxidised to chlorine.
  • Uses: It is an important analytical and preparative-organic oxidant, and is used to bleach textile fibres and decolourise oils.
\ce10I−+2MnO4−+16H+−>2Mn2++8H2O+5I2\ce{10I- + 2MnO4- + 16H+ -> 2Mn^2+ + 8H2O + 5I2}
In acid, iodide is oxidised to iodine and permanganate is reduced to \ceMn2+\ce{Mn^{2+}}.
\ce5Fe2++MnO4−+8H+−>Mn2++4H2O+5Fe3+\ce{5Fe^2+ + MnO4- + 8H+ -> Mn^2+ + 4H2O + 5Fe^3+}
In acid, green iron(II) is converted to iron(III).
\ce5C2O42−+2MnO4−+16H+−>2Mn2++8H2O+10CO2\ce{5C2O4^2- + 2MnO4- + 16H+ -> 2Mn^2+ + 8H2O + 10CO2}
Oxalate oxidation is carried out at 333 K.
\ce5SO32−+2MnO4−+6H+−>2Mn2++3H2O+5SO42−\ce{5SO3^2- + 2MnO4- + 6H+ -> 2Mn^2+ + 3H2O + 5SO4^2-}
In acid, sulphite is oxidised to sulphate.
\ce5NO2−+2MnO4−+6H+−>2Mn2++5NO3−+3H2O\ce{5NO2- + 2MnO4- + 6H+ -> 2Mn^2+ + 5NO3- + 3H2O}
In acid, nitrite is oxidised to nitrate.
\ceI−+2MnO4−+H2O−>IO3−+2MnO2+2OH−\ce{I- + 2MnO4- + H2O -> IO3- + 2MnO2 + 2OH-}
The product is iodate and permanganate is reduced to manganese dioxide.
\ce3S2O32−+8MnO4−+H2O−>6SO42−+8MnO2+2OH−\ce{3S2O3^2- + 8MnO4- + H2O -> 6SO4^2- + 8MnO2 + 2OH-}
Thiosulphate is oxidised almost quantitatively to sulphate.
\ce3Mn2++2MnO4−+2H2O−>5MnO2+4H+\ce{3Mn^2+ + 2MnO4- + 2H2O -> 5MnO2 + 4H+}
Zinc sulphate or zinc oxide catalyses this oxidation.

The Inner Transition Elements: f-Block

Lanthanoids vs Actinoids
PointLanthanoidsActinoids
SeriesFourteen elements following lanthanum; lanthanum is commonly included in discussion.Fourteen elements following actinium; actinium is commonly included in discussion.
General symbol\ceLn\ce{Ln}Actinoid symbols are used individually.
ChemistryClosely similar elements; +3+3 is the most stable oxidation state.More complex chemistry, with a wider range of oxidation states and radioactivity-related study challenges.
Series membersLanthanum through lutetium.Thorium through lawrencium; actinium is included in general discussion.

Lanthanoids

Electronic Configurations and Contraction

  • Configuration: Lanthanoid atoms generally have 6s26s^2 and a progressively occupied 4f4f subshell. Their most stable tripositive ions have configurations 4fn4f^n, where n=1n=1 to 1414.
  • Lanthanoid contraction: Atomic and especially \ceLn3+\ce{Ln^{3+}} ionic radii decrease overall from lanthanum to lutetium.
  • Cause: Increasing nuclear charge is incompletely shielded by added 4f4f electrons; their shielding of one another is particularly poor.
  • Regularity: The decrease is more regular for \ceLn3+\ce{Ln^{3+}} ions than for atomic radii. Contraction affects the chemistry and sizes of elements in the following transition series.
Decrease in lanthanoid ionic radii with increasing atomic number.
Decrease in lanthanoid ionic radii with increasing atomic number.
Lanthanoid Oxidation States and Special Stability
Ion / elementConfiguration or behaviour
Common state+3+3 predominates across the series.
\ceCe4+\ce{Ce^4+}Favoured by a noble-gas configuration; strong oxidant reverting to \ceCe3+\ce{Ce^3+}. E∘(\ceCe4+/Ce3+)=+1.74 VE^\circ(\ce{Ce^4+/Ce^3+})=+1.74\,\mathrm{V}; its reaction with water is slow.
Pr, Nd, Tb, DyShow +4+4 in oxides \ceMO2\ce{MO2}.
\ceEu2+\ce{Eu^2+}4f74f^7 configuration; strong reducing agent that tends to become \ceEu3+\ce{Eu^3+}.
\ceYb2+\ce{Yb^2+}4f144f^{14} configuration; reducing agent.
\ceTb4+\ce{Tb^4+}Has a half-filled 4f4f subshell and is an oxidant.
SamariumCommonly shows both +2+2 and +3+3, like europium.

Physical and Chemical Properties

  • Colour: Most tripositive lanthanoid ions are coloured because of ff-electron transitions; the absorption bands are narrow. \ceLa3+\ce{La^3+} and \ceLu3+\ce{Lu^3+} are colourless.
  • Magnetism: Ions with partially filled ff subshells are generally paramagnetic. The f0f^0 and f14f^{14} ions, including \ceLa3+\ce{La^3+}, \ceCe4+\ce{Ce^4+}, \ceYb2+\ce{Yb^2+} and \ceLu3+\ce{Lu^3+}, are exceptions.
  • Ionisation enthalpies: First values are about 600 kJ mol−1600\,\mathrm{kJ\,mol^{-1}} and second values about 1200 kJ mol−11200\,\mathrm{kJ\,mol^{-1}}. Empty, half-filled and full ff subshells contribute stability; the third ionisation enthalpies of La, Gd and Lu are unusually low.
  • Reactivity: Early members are calcium-like and highly reactive; later members become more aluminium-like. The \ceLn3+/Ln\ce{Ln^{3+}/Ln} reduction potentials are usually −2.2-2.2 to −2.4 V-2.4\,\mathrm{V} (Eu: −2.0 V-2.0\,\mathrm{V}).
  • Reactions: Lanthanoids form hydrides on gentle heating in hydrogen; carbides with carbon; halides with halogens; and oxides \ceM2O3\ce{M2O3} and hydroxides \ceM(OH)3\ce{M(OH)3}. They liberate hydrogen from dilute acids.
  • Hydroxides: \ceM(OH)3\ce{M(OH)3} are definite compounds, not merely hydrated oxides, and are basic like alkaline-earth hydroxides.
Reaction map for lanthanoids with oxygen, acids, halogens, water, sulphur, nitrogen and carbon.
Reaction map for lanthanoids with oxygen, acids, halogens, water, sulphur, nitrogen and carbon.

Actinoids

Electronic Configurations and Contraction

  • Configuration: Actinoid atoms generally contain 7s27s^2 and variably occupied 5f5f and 6d6d subshells. Electrons are formally added to 5f5f; filling proceeds from protactinium, reaching 5f145f^{14} at lawrencium.
  • Irregularities: Configurations reflect extra stability of 5f05f^0, 5f75f^7 and 5f145f^{14} arrangements. Examples: Am is [\ceRn]5f77s2[\ce{Rn}]5f^7 7s^2; Cm is [\ceRn]5f76d17s2[\ce{Rn}]5f^7 6d^1 7s^2.
  • Bonding: Unlike the more deeply buried 4f4f orbitals, 5f5f orbitals can participate substantially in bonding.
  • Actinoid contraction: Atomic and \ceM3+\ce{M^{3+}} ionic sizes generally decrease across the series. The contraction is greater than in lanthanoids because 5f5f electrons shield nuclear charge poorly.
Actinoid Oxidation-State Pattern
ElementsOxidation states
Ac+3+3
Th+4+4
Pa+4,+5+4,+5
U+3,+4,+5,+6+3,+4,+5,+6
Np and Pu+3,+4,+5,+6,+7+3,+4,+5,+6,+7
Am+3,+4,+5,+6+3,+4,+5,+6
Cm+3,+4+3,+4
Bk through Lr+3+3

Oxidation States, Reactivity and Comparison

  • Range of states: Actinoids generally show +3+3, but the early members show more higher oxidation states because 5f5f, 6d6d and 7s7s levels have comparable energies.
  • Maximum state: It rises from +4+4 in Th to +5+5 in Pa, +6+6 in U and +7+7 in Np, then generally declines among later members. The +3+3 state is more common than +4+4 overall.
  • Hydrolysis: Both +3+3 and +4+4 actinoid ions tend to hydrolyse; oxidation-state patterns are too uneven for a single simple series-wide description.
  • Reactivity: Finely divided actinoids are highly reactive. Boiling water produces a mixture of oxide and hydride; many non-metals react at moderate temperatures.
  • Acids and alkalis: Hydrochloric acid attacks all actinoids. Nitric acid affects most only slightly because protective oxide layers form; alkalis have no action.
  • Magnetism: Magnetic behaviour is more complex than in lanthanoids. Susceptibility roughly follows the number of unpaired 5f5f electrons, but lanthanoids have higher values.
  • Bonding tendency: Early actinoid ionisation enthalpies are lower than those of early lanthanoids; less deeply penetrating 5f5f electrons are more shielded and more available for bonding.
  • Series comparison: Lanthanoid-like behaviour becomes clearer in the second half of the actinoid series. Both series show similarities among neighbours and gradual changes where oxidation state stays constant.

Why is actinoid contraction greater than lanthanoid contraction?

Answer: The increase in nuclear charge is poorly shielded by added 5f5f electrons, so atomic and ionic sizes decrease more strongly across the actinoid series.

Name a lanthanoid well known to exhibit the +4+4 oxidation state.

Answer: Cerium, \ceCe\ce{Ce}, commonly forms \ceCe4+\ce{Ce^4+}.

Why is hydrochloric acid unsuitable for permanganate titrations?

Answer: Permanganate oxidises hydrochloric acid to chlorine, causing an unwanted side reaction.

Quick recap

  • Higher transition-metal oxides tend to be more covalent and acidic; oxide character varies with oxidation state.
  • Chromate and dichromate interconvert with pH; acidified dichromate is a strong oxidant, and potassium dichromate is a primary standard.
  • Permanganate is a powerful oxidant whose reduction product depends on the reaction medium.
  • Lanthanoids usually form +3+3 ions, show 4f4f-based colour and magnetism, and contract in size from La to Lu.
  • Actinoids have variable 5f5f configurations, a wider range of oxidation states and a greater contraction across the series.
  • Poor shielding by 4f4f and 5f5f electrons explains the respective lanthanoid and actinoid contractions.
Lecture 5

The Lanthanoids, The Actinoids

Reference video · Lecture 5The Lanthanoids, The Actinoids

Applications of d- and f-Block Elements

  • Steels: Iron oxides are reduced, impurities removed, and carbon or alloying metals such as CrCr, MnMn and NiNi added to make construction steels.
  • Special-purpose compounds: Titanium monoxide (TiOTiO) is used as a pigment; manganese dioxide (MnO2MnO_2) is used in dry battery cells.
  • Batteries: The battery industry uses ZnZn and nickel–cadmium (Ni/CdNi/Cd) systems.
  • Coinage: Group 1111 metals are known as coinage metals. Modern UK copper coins are copper-coated steel; silver-coloured coins are a Cu/NiCu/Ni alloy. AgAg and AuAu are largely restricted to collection items.
  • Photography: Silver bromide (AgBrAgBr) is used for its light-sensitive properties.
Important Catalysts
CatalystUse
V2O5V_2O_5Catalyses oxidation of SO2SO_2 in sulphuric acid manufacture.
TiCl4TiCl_4 with Al(CH3)3Al(CH_3)_3Forms Ziegler catalysts used to manufacture polyethylene (polythene).
IronCatalyses ammonia production from N2/H2N_2/H_2 mixtures in the Haber process.
NickelCatalyses hydrogenation of fats.
PdCl2PdCl_2Catalyses the Wacker oxidation of ethyne to ethanal.
Nickel complexesHelp polymerise alkynes and other organic compounds, including benzene.

Position and General Features of the d- and f-Blocks

  • d-block: Occupies the middle of the periodic table, in Groups 33–1212; the inner dd orbitals are progressively filled.
  • f-block: Placed separately at the bottom of the periodic table; the 4f4f and 5f5f orbitals are progressively filled.
  • Transition series: Three recognised series correspond to progressive filling of the 3d3d, 4d4d and 5d5d orbitals.
  • Metallic properties: Transition elements typically have high tensile strength and show ductility, malleability, good thermal and electrical conductivity, and metallic character.
  • High melting and boiling points: Strong interatomic bonding involves (n−1)d(n-1)d electrons. Many properties peak near the middle of a series, where one unpaired electron per dd orbital favours strong interactions.

Characteristic Properties of Transition Elements

  • Variable oxidation states: Successive ionisation enthalpies rise less steeply than in main-group elements, so different numbers of (n−1)d(n-1)d electrons can be lost.
  • Distinctive behaviour: Participation of (n−1)d(n-1)d electrons contributes to paramagnetism, catalytic activity, coloured ions, complex formation and interstitial compounds.
  • Chemical reactivity: Many transition metals dissolve in mineral acids, while a few are noble. In the first transition series, all metals except copper are relatively reactive.
  • Binary compounds: Transition metals react with non-metals such as oxygen, nitrogen, sulphur and halogens.
  • Oxides: First-series transition-metal oxides commonly form when metals react with oxygen at high temperatures. They can dissolve in acids or bases to form oxometallic salts.
Important Oxometallic Salts
CompoundPreparation source or note
Potassium dichromate (K2Cr2O7K_2Cr_2O_7)Prepared from chromite ore by fusion with alkali in air, followed by acidification of the extract.
Potassium permanganate (KMnO4KMnO_4)Prepared using pyrolusite ore (MnO2MnO_2).
★ Remember
  • Strong oxidising agents: Dichromate (Cr2O72−Cr_2O_7^{2-}) and permanganate (MnO4−MnO_4^-) ions are strong oxidising agents.

Lanthanoids and Actinoids

  • Inner transition elements: Lanthanoids and actinoids are the two ff-block series, involving progressive filling of inner orbitals.
  • Lanthanoid contraction: Atomic and ionic sizes gradually decrease across the lanthanoid series as the 4f4f orbitals fill; this affects the chemistry of elements that follow.
  • Lanthanoid properties: Lanthanum and the lanthanoids are generally soft, white metals. They react readily with water to form solutions containing +3+3 ions.
  • Lanthanoid oxidation states: The principal oxidation state is +3+3; some lanthanoids occasionally show +2+2 or +4+4 states.
  • Actinoids: Their chemistry is more complex because they can have different oxidation states. Many are radioactive, making them difficult to study.

What is lanthanoid contraction, and why is it important?

Answer: It is the gradual decrease in atomic and ionic sizes across the lanthanoid series as the 4f4f orbitals fill. It has important effects on the chemistry of elements that follow.

What are the main oxidation states of lanthanoids?

Answer: The principal oxidation state is +3+3; some lanthanoids occasionally show +2+2 and +4+4 states.

Quick recap

  • The dd-block occupies Groups 33–1212; the ff-block is placed separately at the bottom of the periodic table.
  • Transition elements have typical metallic properties, including high tensile strength, and show variable oxidation states, paramagnetism, catalytic activity, coloured ions, complex formation and interstitial compounds.
  • Dichromate and permanganate ions are strong oxidising agents.
  • Lanthanoid contraction is the gradual size decrease across the lanthanoid series as the 4f4f orbitals fill.
  • Lanthanoids mainly form +3+3 ions; actinoid chemistry is complex and many actinoids are radioactive.
  • Applications include steels, batteries, catalysts, pigments and photography.

Chemistry — ALL CHAPTERS

1

Solutions

View

2

Electrochemistry

View

3

Chemical Kinetics

View

4

The D- And F -Block Elements

View

5

Coordination Compounds

View

6

Haloalkanes And Haloarenes

View

7

Alcohols, Phenols And Ethers

View

8

Aldehydes, Ketones and Carboxylic Acids

View

9

Amines

View

10

Biomolecules

View