Class 12 PCM . Physics . Physics Part I . Magnetism and Matter
Chapter 5: Magnetism And Matter
Ch 5
Physics
Class 12 PCM
Introduction
Magnetism and Magnetic Poles
Magnetism — A natural phenomenon associated with magnetic fields, found from atomic to planetary and galactic scales.
Basic facts
- Magnetic fields: Moving electric charges and currents produce magnetic fields; this connection was established by Oersted, Ampere, Biot and Savart.
- Earth: Earth behaves approximately like a magnet, with its magnetic field directed from geographic south towards geographic north.
- Suspended magnet: A freely suspended bar magnet aligns approximately north–south. Its north pole points towards geographic north and its south pole towards geographic south.
- Pole interaction: Like poles repel; unlike poles attract.
- No isolated poles: Breaking a bar magnet produces two smaller magnets, each with both a north and a south pole. Magnetic monopoles do not exist.
- Magnetic materials: Magnets can be made from iron and its alloys.
- Material classification: Magnetic materials are classified as diamagnetic, paramagnetic or ferromagnetic.
| Magnetic poles | Interaction |
|---|---|
| North–north or south–south | Repel |
| North–south | Attract |
Magnetic Field Lines
Magnetic field lines — Imaginary curves that represent the direction and relative strength of a magnetic field.
Field-line properties
- Closed loops: Magnetic field lines form continuous closed loops. Electric dipole field lines begin on positive charge and end on negative charge or extend to infinity.
- Direction: The tangent to a field line at any point gives the direction of the magnetic field there.
- Strength: More field lines crossing a unit area indicate a stronger magnetic field; the field is stronger where the lines are denser.
- No intersection: Field lines never intersect, because the magnetic field has only one direction at a given point.
- Mapping: The orientation of a small compass needle at different positions indicates the local field direction.
- Terminology: “Lines of force” is avoided because magnetic field lines do not indicate the force direction on a moving charge.


Bar Magnet as an Equivalent Solenoid
The equivalence
- Current-loop model: A current loop acts as a magnetic dipole. Ampere’s hypothesis explains magnetic phenomena in terms of circulating currents.
- Similar fields: A bar magnet and a current-carrying solenoid produce similar magnetic field patterns, including at large distances along their axes.
- Cutting a magnet: Each half becomes a smaller magnet with both poles, just as cutting a solenoid gives smaller solenoids with weaker magnetic properties.
- Magnetic moment: A bar magnet’s magnetic moment equals that of an equivalent solenoid producing the same magnetic field.
At a large axial distance , is the magnetic moment.

Quick recap
- Earth behaves approximately like a magnet; a freely suspended magnet aligns approximately north–south.
- Like magnetic poles repel, unlike poles attract, and isolated magnetic poles do not exist.
- Magnetic materials are classified as diamagnetic, paramagnetic or ferromagnetic.
- Magnetic field lines form closed loops, do not intersect, and their tangent gives the direction of .
- Field-line density per unit area indicates magnetic-field strength.
- A bar magnet and an equivalent solenoid have the same magnetic moment when they produce the same field.
- The far axial field varies as : .
The dipole in a uniform magnetic field
Torque and Potential Energy of a Magnetic Dipole
Magnetic dipole in a uniform field — A magnetic dipole with moment in a uniform magnetic field experiences torque but no net force.
Here is the angle between and ; the torque tends to align the dipole with the field.
The zero of potential energy is chosen at , where the dipole is perpendicular to the field.
| Orientation | Energy | Stability |
|---|---|---|
| ; parallel to | (minimum) | Most stable |
| ; perpendicular to | Reference zero of energy | |
| ; opposite to | (maximum) | Most unstable |

Consequences and Magnetic Bar Examples
Key facts
- Cutting a bar magnet: A cut across its length or along its length produces two magnets, each with a north and a south pole.
- Uniform field: A dipole experiences torque but no net force because the forces on its two poles balance.
- Non-uniform field: An iron nail near a bar magnet becomes magnetically induced and experiences both force and torque; the net force is attractive.
- No poles in every field: A magnetic field need not come from a dipole with north and south poles; examples include a toroid and an infinitely long straight conductor.
- Finding whether both bars are magnets: Try different ends together. Repulsion in any arrangement proves both are magnetised; attraction alone does not.
Identifying which bar is magnetised
- Field strength along a bar magnet: It is strongest near the poles (ends) and weakest near the centre.
- Test: Bring an end of bar A near an end of bar B, then near B’s middle. If the force disappears at B’s middle, B is the magnet; if it does not change, A is the magnet.
The Electrostatic Analogy
Dipole correspondence
- Replacement rules: Convert electric-dipole results to magnetic-dipole results using , , and .
- Short-dipole condition: The field formulas below apply when the observation distance is much greater than the magnet’s size .
The equatorial field points opposite to the magnetic moment.
The axial field points along the magnetic moment.
| Quantity | Electric dipole | Magnetic dipole |
|---|---|---|
| Dipole moment | ||
| Field coefficient | ||
| Equatorial field | ||
| Axial field | ||
| Torque in an external field | ||
| Potential energy in an external field |
Why does a magnetised needle in a uniform field have torque but no net force, while an iron nail near a bar magnet is attracted?
Quick recap
- A magnetic dipole in a uniform field experiences torque but no net force.
- Its potential energy is , with the zero chosen at .
- Parallel alignment is most stable; antiparallel alignment is most unstable.
- A non-uniform magnetic field can exert a net force on an induced dipole, such as an iron nail.
- At distances much greater than magnet size, the axial and equatorial fields vary as .
- Electric- and magnetic-dipole formulas correspond under , , and .
Magnetism and Gauss’s Law
Magnetic Flux Through a Closed Surface
Magnetic flux and its net value
- Magnetic flux through a small area element is the dot product of the magnetic field and the area vector: .
- Closed surface: Magnetic field lines enter and leave in equal amounts, so the total magnetic flux is zero.
- Area vector: For a closed surface, each small area vector points outward.
| Point | Magnetism | Electrostatics |
|---|---|---|
| Flux through a closed surface | ||
| Sources and sinks | No isolated magnetic poles are known; magnetic field lines form closed loops. | Electric charges act as sources or sinks of electric field lines. |
| Closed field-line loops | Magnetic field lines can form closed loops; static loops enclose a region across which current passes. | Electrostatic field lines never form closed loops, even if the loop encloses charges. |
Why the magnetic flux is zero
- No monopoles: Isolated north or south magnetic poles have not been observed.
- No magnetic sources or sinks: Magnetic field lines do not begin or end at a point; they form closed loops.
- Basic magnetic elements: A magnetic dipole or a current loop is the simplest magnetic element; magnetic phenomena can be described using dipoles and/or current loops.
Rules for Magnetic Field-Line Diagrams
How to check a field-line diagram
- No crossing: Field lines cannot cross because the field would have two directions at one point.
- No isolated ends: Magnetic lines cannot emanate from, or terminate at, a single pole.
- Closed magnetic loops: Magnetic lines may form closed loops; for a static magnetic field, a loop must enclose a region carrying current.
- Electrostatic lines: They never form closed loops, whether or not the loop encloses charges.
- Zero-flux test: Any closed surface must have equal magnetic flux entering and leaving it.
- Field-line force: A magnetic field line gives the direction of the field, not the direction of force on every particle.
| Pattern | Verdict | Reason or correct interpretation |
|---|---|---|
| Radial lines emerging from a point | Wrong for magnetism | Violates zero net flux; can represent the electric field of a positively charged long wire. |
| Crossing field lines | Wrong | The field direction would be ambiguous at the crossing. |
| Lines confined in a toroid | Correct | Closed magnetic loops encircle the current-carrying region; the field is inside the toroid. |
| Solenoid lines perfectly straight and confined, including outside | Wrong | The field lines curve out at the ends and join to make closed loops. |
| Field around a bar magnet | Correct | Lines go from north to south outside the magnet and return from south to north inside it. |
| Lines emerging from one plate and ending on another | Wrong for magnetism | The non-zero flux pattern represents the electrostatic field of oppositely charged plates. |
| Precisely straight lines between pole pieces, with no fringing | Wrong | Field lines fringe at the ends; perfect confinement would violate Ampere’s law. Fringing also occurs for electric field lines. |




Further Implications
Magnetic force, monopoles and magnetic moments
- Force on a moving charge: The magnetic force is perpendicular to the magnetic field, so field lines are not generally lines of force: .
- If monopoles existed: The magnetic-flux law would have a non-zero right-hand side equal to the enclosed magnetic charge.
- Self-interaction: A bar magnet does not exert a torque on itself; a wire element does not exert a force on itself through its own field.
- Same-wire interaction: Different elements of the same wire can exert forces or torques on one another; for a straight wire, this force is zero.
- Neutral systems: A system can have zero net charge yet a non-zero magnetic moment, because its current loops can have a non-zero combined moment.
- Paramagnetic example: Atoms in paramagnetic materials can have a net magnetic dipole moment even though each atom has zero net charge.
Why are magnetic field lines not generally lines of force on a moving charge?
How would Gauss’s law for magnetism change if monopoles existed?
Can a system with zero net charge still have a magnetic moment?
Quick recap
- The magnetic flux through a small area element is .
- The net magnetic flux through every closed surface is zero.
- Magnetic field lines form closed loops because isolated magnetic poles are not known to exist.
- Magnetic field lines never cross or begin and end at isolated points; electrostatic lines never form closed loops.
- A magnetic field line shows field direction, not the force direction on a moving charge.
- A neutral system, including paramagnetic atoms, can still have a non-zero magnetic moment.
Magnetisation and Magnetic Intensity
Magnetisation
Magnetisation — Magnetisation is the net magnetic moment of a material per unit volume.
- Origin: Atomic magnetic moments add vectorially; their sum may produce a non-zero net moment.
- Nature and unit: is a vector with dimensions and SI unit .
Here is the net magnetic moment and is the sample volume.
Magnetic Intensity and Magnetic Field
Field in a solenoid
- Without a magnetic core: A long solenoid with turns per unit length carrying current produces field inside it.
- With a magnetic core: The material contributes an additional field , so the total field is .
- Vacuum permeability: is the permeability of free space.
Magnetic intensity — Magnetic intensity represents the field contribution associated with external sources, separated from the material’s magnetisation.
has the same dimensions and SI unit as : and .
For a solenoid, ; the total field combines the external contribution and the material magnetisation.
Susceptibility and Permeability
Magnetic susceptibility — Magnetic susceptibility measures how strongly a material becomes magnetised in response to magnetic intensity.
is dimensionless.
Relative and absolute permeability
- Relative permeability: is dimensionless and is analogous to the dielectric constant in electrostatics.
- Permeability: ; it has the same dimensions and units as .
Combining with gives these equivalent forms.
Worked Example: Solenoid with a Magnetic Core
Given: , ,
- Intensity: .
- Magnetic field: .
- Magnetisation: .
- Magnetising current: The extra current in an empty solenoid needed to produce the same field is .
Magnetic Properties of Materials
| Material | Susceptibility | Relative permeability | Permeability |
|---|---|---|---|
| Diamagnetic | |||
| Paramagnetic | (small positive) | ||
| Ferromagnetic | (large positive) |
- Diamagnetic response: is negative, so and point in opposite directions.
- Paramagnetic response: is positive but small; is along .
- Ferromagnetic response: is large and positive.
Define magnetic intensity and state its relation to and .
Quick recap
- Magnetisation is net magnetic moment per unit volume: .
- A magnetic core adds field to the solenoid field.
- Magnetic intensity is ; for a solenoid, .
- Susceptibility describes response: ; relative permeability is .
- The material field relation is .
- Diamagnetic materials have negative , paramagnetic materials small positive , and ferromagnetic materials large positive .
Diamagnetism
Diamagnetic Behaviour
Diamagnetic substance — A substance weakly repelled by an external magnetic field and tending to move from a stronger-field region to a weaker-field region.
Behaviour and Cause
- Field effect: Field lines are expelled, so the field inside is slightly reduced—typically by about one part in .
- Atomic state: The resultant magnetic moment of an atom is normally zero, although orbiting electrons have orbital magnetic moments.
- Applied field: By Lenz’s law, changes in electron motion induce a magnetic moment opposite to the applied field.
- Net result: The opposing moment causes repulsion; in a non-uniform field, a diamagnetic substance moves from high field to low field.
Examples and Superconductors
- Examples: Bismuth, copper, lead, silicon, nitrogen at STP, water and sodium chloride are diamagnetic.
- Universality: Diamagnetism occurs in all substances, but is often masked by stronger paramagnetic or ferromagnetic effects.
- Superconductors: These are metals cooled to very low temperatures; they show perfect conductivity and perfect diamagnetism, completely expelling field lines.
- Meissner effect: Perfect diamagnetism in a superconductor is called the Meissner effect; its susceptibility is and relative permeability is .
- Repulsion and use: A superconductor and a magnet repel each other; superconducting magnets can be used in magnetically levitated superfast trains.

Paramagnetism
Paramagnetic substance — A substance that becomes weakly magnetised in an external field and is weakly attracted towards stronger magnetic fields.
Behaviour and Cause
- Atomic moments: Atoms, ions or molecules possess permanent magnetic dipole moments.
- Without a field: Random thermal motion keeps the moments disordered, so there is no net magnetisation.
- With a field: A sufficiently strong field, especially at low temperature, aligns dipoles along the field; field lines become concentrated inside the material.
- Motion and field change: A non-uniform field draws the sample towards stronger fields; field enhancement is typically about one part in .
- Saturation: Increasing the field or lowering the temperature increases magnetisation until all dipoles align. Both and depend on the material and sample temperature.
Examples
- Examples: Aluminium, sodium, calcium, oxygen at STP and copper chloride.
Ferromagnetism
Ferromagnetic substance — A substance that becomes strongly magnetised in an external field and is strongly attracted towards stronger magnetic fields.
Domains and Magnetisation
- Domains: Interactions make atomic dipole moments align spontaneously over macroscopic regions called domains; each domain has net magnetisation.
- Domain scale: A typical domain is about in size and contains roughly atoms.
- Unmagnetised state: Domains point in different directions, so their magnetisations cancel and there is no bulk magnetisation.
- Applied field: Domains turn towards the field, while those already aligned grow; the material becomes strongly magnetised and concentrates field lines.
- Motion and mechanism: In a non-uniform field, a ferromagnetic sample moves towards stronger fields. The cooperative domain effect requires quantum mechanics for its full explanation.

| Type | After external field is removed | Examples and use |
|---|---|---|
| Hard ferromagnets | Magnetisation persists. | Alnico (iron, aluminium, nickel, cobalt and copper) and natural lodestone; used to make permanent magnets such as compass needles. |
| Soft ferromagnets | Magnetisation disappears. | Soft iron. |
Examples and Temperature Effect
- Ferromagnetic elements: Iron, cobalt, nickel and gadolinium are examples; relative permeability is greater than .
- Temperature: At sufficiently high temperature, a ferromagnet becomes paramagnetic as its domain structure breaks down; magnetisation disappears gradually.
| Property | Diamagnetic | Paramagnetic | Ferromagnetic |
|---|---|---|---|
| Atomic dipoles | Resultant atomic moment is zero. | Permanent moments; random without a field. | Permanent moments interact and form aligned domains. |
| Response to field | Induced moment opposes the field; weak repulsion. | Dipoles align with the field; weak attraction. | Domains align and grow; strong attraction. |
| Non-uniform field | Moves towards weaker field. | Moves towards stronger field. | Moves towards stronger field. |
| Field inside | Slightly reduced. | Slightly enhanced. | Highly concentrated. |
What causes diamagnetic repulsion?
How does an applied field magnetise a ferromagnet?
What are hard and soft ferromagnets?
Quick recap
- Diamagnets develop a moment opposite to the applied field and move towards weaker fields.
- Superconducting metals cooled to very low temperatures show perfect diamagnetism; complete field expulsion is the Meissner effect, with and .
- Paramagnets have permanent atomic dipoles that align weakly with an applied field.
- Ferromagnets have interacting dipoles grouped into domains; domains align and grow in a field.
- Hard ferromagnets retain magnetisation; soft ferromagnets lose it when the field is removed.
- Heating a ferromagnet sufficiently can break down its domains and make it paramagnetic.
Summary
Magnetic Poles and Dipole Behaviour
- Magnetic poles: Like poles repel and unlike poles attract; isolated north or south poles do not exist.
- Magnetic dipole: Every magnet has a north and south pole, and breaking it produces smaller magnets with both poles.
A Magnetic Dipole in a Uniform Field
The torque is the vector product of dipole moment and field.
The energy is minimum when the dipole is aligned with the field.
Magnetic Field of a Bar Magnet
Here ; the equatorial expression includes its direction relative to the dipole moment.
Gauss’s Law for Magnetism
The flux contributions through all surface elements add to zero.
| Point | Magnetic field lines | Electrostatic field lines |
|---|---|---|
| Pattern | Continuous closed loops | Begin on positive charges and terminate on negative charges, or extend to infinity |
| Source | No isolated magnetic monopoles | Isolated positive and negative electric charges exist |
Magnetic Properties of Materials
Here oldsymbol{B}_0 is the applied magnetic field and oldsymbol{B} is the field in the material.
Magnetic susceptibility — Magnetic susceptibility [0m\chi measures how strongly a material becomes magnetised in response to [0m\boldsymbol{H}.
For a linear material, magnetisation is proportional to magnetic intensity.
| Quantity | Symbol | Nature | Dimensions | SI unit / note |
|---|---|---|---|---|
| Permeability of free space | Scalar | ; | ||
| Magnetic field / induction / flux density | Vector | Tesla (); | ||
| Magnetic moment | Vector | |||
| Magnetic flux | Scalar | Weber (); | ||
| Magnetisation | Vector | ; magnetic moment per unit volume | ||
| Magnetic intensity / field strength | Vector | |||
| Magnetic susceptibility | Scalar | Dimensionless | ||
| Relative permeability | Scalar | Dimensionless | ||
| Magnetic permeability | Scalar | or |
Magnetic Susceptibility and Permanent Magnets
| Point | Diamagnetic | Paramagnetic |
|---|---|---|
| Susceptibility | Small and negative; approximately | Small and positive; approximately |
| Response to field | Weakly opposed to the applied field | Weakly aligned with the applied field |
Magnetic Monopoles and Quantisation of Charge
State Gauss’s law for magnetism and one consequence.
Write the torque and potential energy of a magnetic dipole in a uniform magnetic field.
Quick recap
- Magnetic poles occur in pairs; cutting a magnet produces smaller magnets, not isolated poles.
- In a uniform field, a magnetic dipole experiences zero net force, torque and energy .
- For , the axial and equatorial dipole fields vary as .
- The net magnetic flux through a closed surface is zero, so magnetic field lines form closed loops.
- For linear materials, and .
- Diamagnetic susceptibility is negative; paramagnetic susceptibility is positive. Persistent ferromagnets are permanent magnets.
Physics — ALL CHAPTERS
1
Electric Charges And Fields
2
Electrostatic Potential And Capacitance
3
Current Electricity
4
Moving Charges And Magnetism
5
Magnetism And Matter
6
Electromagnetic Induction
7
Alternating Current
8
Electromagnetic Waves
1
Ray Optics And Optical Instruments
2
Wave Optics
3
Dual Nature Of Radiation And Matter
4
Atoms
5
Nuclei
6
Semiconductor Electronics: Materials, Devices And Simple Circuits