Class 12 PCM . Physics . Physics Part I . Moving Charges and Magnetism

Chapter 4: Moving Charges And Magnetism

Ch 4

Physics

Class 12 PCM

Lecture 1

Introduction

Reference video · Lecture 1Introduction

Electricity and Magnetism

Definition

Oersted’s observation — In 1820, Hans Christian Oersted found that current in a straight wire deflects a nearby compass needle, showing that moving charges produce a magnetic field.

Evidence for the magnetic field of a current

  • Field pattern: Compass needles align tangentially to circles centred on the wire; iron filings form concentric circles around it.
  • Current direction: Reversing the current reverses the compass deflection.
  • Strength: Deflection increases when current increases or the compass is brought closer to the wire.

Key developments

  1. 1820Oersted linked electric current with magnetic effects.
  2. 1864James Maxwell unified the laws of electricity and magnetism and recognised light as electromagnetic waves.
  3. By the end of the 19th centuryHertz discovered radio waves; J. C. Bose and G. Marconi produced them.
  4. 20th centuryAdvances in electromagnetism and electromagnetic-wave technology enabled production, amplification, transmission and detection of waves.

Chapter focus and field notation

  • Chapter focus: Magnetic fields exert forces on moving charges and current-carrying wires; currents also produce magnetic fields.
  • Applications studied: The chapter includes the cyclotron, which accelerates particles, and the galvanometer, which detects current and voltage.
  • Out of the page: A dot, ⊙\odot, represents a field or current directed towards the observer.
  • Into the page: A cross, ⊗\otimes, represents a field or current directed away from the observer.
  • Working assumption: In the discussions in this chapter, fields are treated as time-independent.

Sources and fields

Definition

Electric field — A source charge QQ creates an electric field at position r\mathbf{r}; a charge qq placed there experiences an electric force.

E=Qr^4πε0r2\mathbf{E}=\frac{Q\hat{\mathbf{r}}}{4\pi\varepsilon_0r^2}
r^\hat{\mathbf{r}} is the unit vector directed along r\mathbf{r}.
F=qQr^4πε0r2\mathbf{F}=\frac{qQ\hat{\mathbf{r}}}{4\pi\varepsilon_0r^2}
The force on a charge qq is F=qE\mathbf{F}=q\mathbf{E}.

Properties of fields

  • Vector field: The electric field is defined at every point in space and may vary with position and time.
  • Physical role: A field can convey energy and momentum; its effects propagate in finite time rather than being established instantaneously.
  • Superposition: Fields due to multiple sources add vectorially.
  • Magnetic field: Moving charges and currents also produce the vector field B(r)\mathbf{B}(\mathbf{r}), which obeys superposition.

Magnetic Field and Lorentz Force

Definition

Lorentz force — The total force on a charge moving in electric and magnetic fields is the sum of its electric and magnetic forces.

F=q(E+v×B)=Felectric+Fmagnetic\mathbf{F}=q(\mathbf{E}+\mathbf{v}\times\mathbf{B})=\mathbf{F}_{\text{electric}}+\mathbf{F}_{\text{magnetic}}
Here, E\mathbf{E} and B\mathbf{B} are the electric and magnetic fields at the charge’s position.

Magnetic force on a moving charge

  • Dependence: The magnetic force depends on charge qq, velocity v\mathbf{v} and magnetic field B\mathbf{B}.
  • Charge sign: The force on a negative charge is opposite to that on a positive charge moving in the same fields.
  • Direction: The force is perpendicular to both v\mathbf{v} and B\mathbf{B}; use the right-hand rule for a positive charge.
  • Zero force: It vanishes for a stationary charge or when velocity is parallel or antiparallel to the field.
Magnitude of magnetic force
Fmagnetic=∣q∣vBsin⁡θF_{\text{magnetic}}=|q|vB\sin\theta

θ\theta is the angle between velocity and magnetic field.

SI unit of magnetic field
1 T=1 NA m=1 N sC m1\,\mathrm{T}=1\,\frac{\mathrm{N}}{\mathrm{A\,m}}=1\,\frac{\mathrm{N\,s}}{\mathrm{C\,m}}

A field is 1 T1\,\mathrm{T} if it exerts a force of 1 N1\,\mathrm{N} on a 1 C1\,\mathrm{C} charge moving at 1 m s−11\,\mathrm{m\,s^{-1}} perpendicular to the field.

Magnetic-field units and scale

  • SI unit: The tesla (T\mathrm{T}) is named after Nikola Tesla; dimensionally, [B]=[F/(qv)][B]=[F/(qv)].
  • Smaller unit: 1 gauss=10−4 T1\,\mathrm{gauss}=10^{-4}\,\mathrm{T}.
  • Earth’s field: Its magnitude is approximately 3.6×10−5 T3.6\times10^{-5}\,\mathrm{T}.

Magnetic Force on a Current-Carrying Conductor

Force on a straight conductor

  • Carrier model: For a wire of length ll, cross-sectional area AA and carrier density nn, the number of mobile carriers is nlAnlA.
  • Drift motion: If each carrier has charge qq and drift velocity vd\mathbf{v}_d, the total magnetic force on the carriers gives the force on the wire.
  • Current density: j=nqvd\mathbf{j}=nq\mathbf{v}_d, and the current magnitude is I=∣j∣AI=|\mathbf{j}|A.
  • Current direction: The length vector ℓ\boldsymbol{\ell} points in the direction of the current; current II itself is a scalar.
  • External field: In the conductor-force equation, B\mathbf{B} is the applied external field, not the field produced by that wire.
F=Iℓ×B\mathbf{F}=I\boldsymbol{\ell}\times\mathbf{B}
The vector ℓ\boldsymbol{\ell} has magnitude equal to the wire length and points along the current.
Force on a wire of arbitrary shape
F=I∫dℓ×B\mathbf{F}=I\int d\boldsymbol{\ell}\times\mathbf{B}

For a curved wire, sum the force on each small segment; in the continuous limit, integrate along the wire.

When is the magnetic force on a moving charge zero?

Answer: It is zero if the charge is stationary or if its velocity is parallel or antiparallel to the magnetic field.

State the Lorentz-force equation and identify its magnetic term.

Answer: The total force is F=q(E+v×B)\mathbf{F}=q(\mathbf{E}+\mathbf{v}\times\mathbf{B}); its magnetic term is qv×Bq\mathbf{v}\times\mathbf{B}.

Write the force on a straight current-carrying conductor in a magnetic field.

Answer: F=Iℓ×B\mathbf{F}=I\boldsymbol{\ell}\times\mathbf{B}, where ℓ\boldsymbol{\ell} points along the current and B\mathbf{B} is the external field.

Quick recap

  • Oersted’s 1820 observation showed that electric currents produce magnetic fields.
  • Electric and magnetic fields are vector fields; multiple-source fields add by superposition, and the chapter assumes fields are time-independent.
  • The Lorentz force is q(E+v×B)q(\mathbf{E}+\mathbf{v}\times\mathbf{B}); its magnetic part acts perpendicular to velocity and field.
  • Magnetic force is zero for a stationary charge or motion parallel to the field; the SI field unit is the tesla.
  • A straight wire in an external magnetic field experiences Iℓ×BI\boldsymbol{\ell}\times\mathbf{B}.
Lecture 2

Motion in a Magnetic Field

Reference video · Lecture 2Motion in a Magnetic Field

Charged-Particle Motion in a Uniform Magnetic Field

Charged particles move in circular paths in a uniform magnetic field directed into the page.
Charged particles move in circular paths in a uniform magnetic field directed into the page.

Circular Motion and Cyclotron Quantities

  • Radius: For perpendicular velocity, equate magnetic force and centripetal force: ∣q∣vB=mv2/r|q|vB=mv^2/r.
  • Momentum: The radius increases with momentum; a more energetic particle traces a larger circle (for fixed charge and field).
  • Cyclotron frequency: The rotation frequency is independent of the particle’s speed and energy, a principle used in cyclotrons.
Radius, angular frequency, frequency and period
r=mv∣q∣B,ω=∣q∣Bm,ν=∣q∣B2πm,T=2πm∣q∣Br=\frac{mv}{|q|B},\qquad \omega=\frac{|q|B}{m},\qquad \nu=\frac{|q|B}{2\pi m},\qquad T=\frac{2\pi m}{|q|B}

For motion perpendicular to the field; use ∣q∣|q| for the charge magnitude.

Helical Motion and Pitch

  • Parallel component: The velocity component v∥v_{\parallel} along B⃗\vec B is unaffected, while the perpendicular component causes circular motion.
  • Pitch: The distance travelled along the field in one revolution is p=v∥Tp=v_{\parallel}T.
  • Helix radius: It is the radius of the circular component of the particle’s motion.
Pitch of a helix
p=v∥T=2πmv∥∣q∣Bp=v_{\parallel}T=\frac{2\pi m v_{\parallel}}{|q|B}

The pitch is the parallel distance covered in one period.

Example: Electron in a Magnetic Field

  • Given: An electron has m=9×10−31 kgm=9\times10^{-31}\,\text{kg}, ∣q∣=1.6×10−19 C|q|=1.6\times10^{-19}\,\text{C}, v=3×107 m s−1v=3\times10^7\,\text{m s}^{-1} and B=6×10−4 TB=6\times10^{-4}\,\text{T}, with v⃗⊥B⃗\vec v\perp\vec B.
  • Results: The path radius is r=0.28 mr=0.28\,\text{m} and the frequency is approximately 17 MHz17\,\text{MHz}.
  • Energy: From Ek=12mv2E_k=\tfrac12 mv^2, the kinetic energy is approximately 4.0×10−16 J=2.5 keV4.0\times10^{-16}\,\text{J}=2.5\,\text{keV}.

Magnetic Field Due to a Current Element: Biot–Savart Law

Biot–Savart law
dB⃗=μ04πI dl⃗×r⃗r3,dB=μ04πI dlsin⁡θr2d\vec B=\frac{\mu_0}{4\pi}\frac{I\,d\vec l\times\vec r}{r^3},\qquad dB=\frac{\mu_0}{4\pi}\frac{I\,dl\sin\theta}{r^2}

Here θ\theta is the angle between dl⃗d\vec l and r⃗\vec r, and μ0\mu_0 is the permeability of free space.

Permeability of free space
μ04π=10−7 T m A−1\frac{\mu_0}{4\pi}=10^{-7}\,\text{T m A}^{-1}

In SI units:

Biot–Savart Law vs Coulomb’s Law
PointBiot–Savart lawCoulomb’s law
SourceVector current element I dl⃗I\,d\vec lScalar electric charge
Distance dependenceInverse-square dependenceInverse-square dependence
DirectionPerpendicular to the plane containing dl⃗d\vec l and r⃗\vec rAlong the displacement vector
Angle dependenceIncludes sin⁡θ\sin\theta; field is zero along the direction of dl⃗d\vec lNo corresponding angle dependence
SuperpositionApplies; field is linear in the sourceApplies; field is linear in the source charge
Relation between free-space constants
ε0μ0=1c2\varepsilon_0\mu_0=\frac{1}{c^2}

The permittivity ε0\varepsilon_0, permeability μ0\mu_0 and speed of light in vacuum cc satisfy:

★ Remember
  • Zero field contribution: If dl⃗d\vec l is parallel to r⃗\vec r, then θ=0\theta=0 and dB=0dB=0.
  • Fixed constants: Since cc is fixed, choosing either ε0\varepsilon_0 or μ0\mu_0 fixes the other; in SI, μ0=4π×10−7\mu_0=4\pi\times10^{-7} in magnitude.

Why does a magnetic field change a charged particle’s direction but not its speed?

Answer: The magnetic force is perpendicular to the particle’s velocity, so it does no work and changes only the direction of motion.

State the Biot–Savart law in vector form and give the direction of dB⃗d\vec B.

Answer: dB⃗=μ04πI dl⃗×r⃗r3d\vec B=\frac{\mu_0}{4\pi}\frac{I\,d\vec l\times\vec r}{r^3}. It is perpendicular to the plane containing dl⃗d\vec l and r⃗\vec r, with direction given by the right-hand rule.

Quick recap

  • A magnetic force is perpendicular to velocity, so it changes direction but not speed or kinetic energy.
  • With v⃗⊥B⃗\vec v\perp\vec B, a charged particle moves in a circle of radius r=mv/(∣q∣B)r=mv/(|q|B).
  • The cyclotron frequency is ν=∣q∣B/(2πm)\nu=|q|B/(2\pi m) and is independent of speed and energy.
  • A velocity component parallel to the field produces helical motion; its pitch is p=2πmv∥/(∣q∣B)p=2\pi m v_{\parallel}/(|q|B).
  • The Biot–Savart law gives the magnetic field from a current element, with direction set by dl⃗×r⃗d\vec l\times\vec r.
  • The free-space constants obey ε0μ0=1/c2\varepsilon_0\mu_0=1/c^2.
Lecture 3

Magnetic Field on the Axis of a Circular Current Loop

Reference video · Lecture 3Magnetic Field on the Axis of a Circular Current Loop

Field Due to a Circular Current Loop

Definition

Magnetic field on the axis of a circular loop — The magnetic field at an axial point is the vector sum of the contributions from all current elements in the loop.

Geometry and Elemental Field

  • Setup: A circular loop of radius RR carries steady current II in free space. Point PP lies at distance xx from the centre on the loop's axis.
  • Distance: Every current element is at distance r=x2+R2r=\sqrt{x^2+R^2} from PP.
  • Biot–Savart law: An element dl⃗d\vec l produces a field with magnitude ∣dB⃗∣=μ04πI∣dl⃗×r⃗∣r2|d\vec B|=\frac{\mu_0}{4\pi}\frac{I|d\vec l\times\vec r|}{r^2}.
  • Loop geometry: Since dl⃗⊥r⃗d\vec l\perp\vec r, ∣dl⃗×r⃗∣=r dl|d\vec l\times\vec r|=r\,dl, giving dB=μ04πI dlx2+R2dB=\frac{\mu_0}{4\pi}\frac{I\,dl}{x^2+R^2}.
Loop geometry and cancellation of transverse field components.
Loop geometry and cancellation of transverse field components.

Adding the Field Components

  • Cancellation: Components perpendicular to the axis cancel in diametrically opposite pairs; only the axial components add.
  • Axial component: The geometry gives cos⁡θ=Rx2+R2\cos\theta=\frac{R}{\sqrt{x^2+R^2}}, so dBx=dBcos⁡θ=μ04πIR dl(x2+R2)3/2dB_x=dB\cos\theta=\frac{\mu_0}{4\pi}\frac{IR\,dl}{(x^2+R^2)^{3/2}}.
  • Summation: Integrating around the loop uses ∮dl=2πR\oint dl=2\pi R.
Magnetic Field at an Axial Point
B=μ0IR22(x2+R2)3/2B=\frac{\mu_0IR^2}{2(x^2+R^2)^{3/2}}

The field is directed along the loop's axis; its direction depends on the current direction.

Field at the Centre and Direction

Magnetic Field at the Centre
B0=μ0I2R,B0,N=μ0NI2RB_0=\frac{\mu_0I}{2R},\qquad B_{0,N}=\frac{\mu_0NI}{2R}

Set x=0x=0. For a tightly wound coil of NN turns, the fields from all turns add.

Example: Field at the Centre of a Coil

  • Given: A tightly wound coil has N=100N=100, R=0.1 mR=0.1\,\text{m}, and I=1 AI=1\,\text{A}.
  • Calculation: Using B0=μ0NI2RB_0=\frac{\mu_0NI}{2R} gives B0=6.28×10−4 TB_0=6.28\times10^{-4}\,\text{T}.

Right-Hand Thumb Rule

  • Rule: Curl the fingers of your right hand in the direction of current around the loop; your thumb points in the magnetic-field direction along the axis.
  • Field lines: The magnetic field lines of a current loop form closed loops.
Closed magnetic-field lines and the right-hand thumb rule for a current loop.
Closed magnetic-field lines and the right-hand thumb rule for a current loop.

Why do only the axial components of the elemental fields contribute to the net field on the loop's axis?

Answer: Transverse components from diametrically opposite elements are equal and opposite, so they cancel. Their axial components point in the same direction and add.

Quick recap

  • The Biot–Savart law gives ∣dB⃗∣=μ04πI∣dl⃗×r⃗∣r2|d\vec B|=\frac{\mu_0}{4\pi}\frac{I|d\vec l\times\vec r|}{r^2}.
  • For an axial point, r=x2+R2r=\sqrt{x^2+R^2} and the loop element is perpendicular to r⃗\vec r.
  • Transverse field components cancel in opposite pairs; axial components add.
  • The axial field magnitude is B=μ0IR22(x2+R2)3/2B=\frac{\mu_0IR^2}{2(x^2+R^2)^{3/2}}.
  • At the centre, B0=μ0I2RB_0=\frac{\mu_0I}{2R}; for NN turns, B0=μ0NI2RB_0=\frac{\mu_0NI}{2R}.
  • Use the right-hand thumb rule to find the field direction.
Lecture 4

Ampere’s Circuital Law

Reference video · Lecture 4Ampere’s Circuital Law

Ampere’s Circuital Law

Definition

Ampere’s circuital law — The circulation of the magnetic field around a closed loop equals μ0\mu_0 times the net current enclosed by that loop.

∮CB⋅dl=μ0Ienc\oint_C \mathbf{B}\cdot d\mathbf{l}=\mu_0 I_{\text{enc}}
The loop follows the boundary of an open surface through which current passes.

Meaning and sign convention

  • Circulation: Add the tangential component of B\mathbf{B} multiplied by each small loop element; in the limit this becomes the closed-loop integral.
  • Enclosed current: IencI_{\text{enc}} is the net current passing through any surface bounded by the loop.
  • Sign convention: Curl the fingers of your right hand in the direction of traversal around the loop; your thumb points in the positive direction for current.
  • Applicability: The law holds for any closed loop, but is most useful when symmetry makes the field easy to evaluate.
An open surface carrying current, bounded by a loop in a magnetic field.
An open surface carrying current, bounded by a loop in a magnetic field.

Using an Amperian Loop

  • Amperian loop: Choose a closed path so that along it the field is either tangential and constant, normal to the path, or zero.
  • Simplification: Only the tangential, non-zero part contributes to the integral. If its length is LL and the enclosed current is IeI_e, then BL=μ0IeBL=\mu_0 I_e.
  • Choice of loop: A useful loop matches the symmetry of the current arrangement, making the field constant or zero over different parts of the path.
BL=μ0IeBL=\mu_0 I_e
Simplified form when the field is constant and tangential over a length LL.

Magnetic Field of an Infinite Straight Wire

  • Symmetry: For an infinitely long straight wire, the field has the same magnitude at every point the same distance rr from the wire and is tangential to a circle centred on it.
  • Amperian path: Choose a circle of radius rr around the wire. The field is tangential and constant around the whole circle, whose circumference is 2πr2\pi r.
  • Result: The field is proportional to the current and inversely proportional to the distance from the wire.
B(2πr)=μ0IB(2\pi r)=\mu_0 I
Applying Ampere’s law to a circular path around the wire.
Field due to an infinite straight wire
B=μ0I2πrB=\frac{\mu_0 I}{2\pi r}

Use at a perpendicular distance rr from a long, straight wire carrying current II.

Field pattern and direction

  • Cylindrical symmetry: The field depends only on distance rr from the wire, not on position around it.
  • Field lines: They form concentric circles around the wire and are closed loops, unlike electrostatic field lines that start and end on charges.
  • Distance behaviour: The field is finite at every non-zero distance and grows without bound only as the distance approaches zero in the ideal wire model.
  • Right-hand grip rule: Point your right thumb along the current; curled fingers show the magnetic-field direction around the wire.
A uniformly current-carrying cylindrical wire, Amperian loops and the magnetic-field variation with distance.
A uniformly current-carrying cylindrical wire, Amperian loops and the magnetic-field variation with distance.

Relation to Other Laws and Limitations

Ampere’s Law, Biot–Savart Law and Gauss’s Law
LawWhat it relatesUse or role
Ampere’s circuital lawMagnetic-field circulation on a boundary to current enclosed within itUseful for finding magnetic fields in highly symmetric cases
Biot–Savart lawMagnetic field to the steady current producing itGives the same physical consequences as Ampere’s law
Gauss’s lawElectric field on a boundary to charge enclosed within itRelates a field at the boundary to its source inside
Coulomb’s lawElectric field to the charges producing itCorresponds to Biot–Savart law in the electric-field comparison
  • Steady-current condition: Ampere’s circuital law in this form applies to currents that do not vary with time.
  • Limitation in solving: Although it holds for every loop, it may not make the field easy to calculate without suitable symmetry.
  • Example of limited usefulness: For a circular current loop, it does not directly give the simple field at the centre, B=μ0I2RB=\frac{\mu_0 I}{2R}.
  • Important distinction: The right-hand grip rule for a straight wire is different from the right-hand rule used to find the field direction on the axis of a current loop.

State Ampere’s circuital law and explain its sign convention.

Answer: The closed-loop integral of the magnetic field is ∮CB⋅dl=μ0Ienc\oint_C \mathbf{B}\cdot d\mathbf{l}=\mu_0 I_{\text{enc}}. Curl the fingers of your right hand along the loop traversal; the thumb gives the positive current direction.

Derive the magnetic field at distance rr from an infinite straight wire.

Answer: Choose a circular Amperian loop of radius rr. By symmetry, BB is constant and tangential, so B(2πr)=μ0IB(2\pi r)=\mu_0 I and B=μ0I2πrB=\frac{\mu_0 I}{2\pi r}.

Quick recap

  • Ampere’s circuital law states ∮CB⋅dl=μ0Ienc\oint_C \mathbf{B}\cdot d\mathbf{l}=\mu_0 I_{\text{enc}} for steady currents.
  • The right-hand curl convention sets the positive direction for enclosed current.
  • For a suitable loop, the law simplifies to BL=μ0IeBL=\mu_0 I_e.
  • An infinite straight wire produces a tangential field B=μ0I2πrB=\frac{\mu_0 I}{2\pi r}.
  • The wire’s magnetic field has cylindrical symmetry and concentric circular field lines.
  • Ampere’s law is most useful when symmetry simplifies the field; it may not help for every current arrangement.
Lecture 5

The Solenoid

Reference video · Lecture 5The Solenoid

Magnetic Field of a Long Solenoid

Definition

Long solenoid — A closely wound helical coil whose length is much greater than its radius.

Structure and field pattern

  • Construction: A long wire is wound as a helix; closely spaced turns can each be treated as circular loops. Enamel insulation keeps adjacent turns electrically separate.
  • Net field: The magnetic field is the vector sum of the fields due to all turns.
  • Inside: The field is strong, uniform, and parallel to the solenoid’s axis.
  • Outside: The field becomes very small as the solenoid gets longer; for an ideal long solenoid, take it as zero.
  • Adjacent turns: Their field contributions cancel between neighbouring turns.
Magnetic field lines of a solenoid and cancellation between adjacent turns.
Magnetic field lines of a solenoid and cancellation between adjacent turns.
Magnetic field inside a long solenoid
B=μ0nIB=\mu_0 nI

The field direction follows the right-hand rule.

Ampere’s circuital-law derivation

  • Loop choice: For a rectangular Amperian loop, take its inside long side of length hh, parallel to the field.
  • Contributions: The outside side contributes zero; the transverse sides contribute zero because the field has no component along them.
  • Enclosed current: If nn is the number of turns per unit length, the loop encloses nhnh turns, so Ie=I(nh)I_e=I(nh).
  • Apply Ampere’s law: Bh=μ0Ie=μ0I(nh)Bh=\mu_0 I_e=\mu_0 I(nh), giving B=μ0nIB=\mu_0 nI.
Rectangular Amperian loop used to find the field inside a long solenoid.
Rectangular Amperian loop used to find the field inside a long solenoid.

Example: Field inside a solenoid

  • Given: Length 0.5 m0.5\,\text{m}, 500500 turns, current 5 A5\,\text{A}, and radius 0.01 m0.01\,\text{m}.
  • Turns per unit length: n=500/0.5=1000 m−1n=500/0.5=1000\,\text{m}^{-1}. The length-to-radius ratio is 5050, so the long-solenoid approximation is suitable.
  • Field: B=μ0nI=4π×10−7×1000×5=6.28×10−3 TB=\mu_0 nI=4\pi\times10^{-7}\times1000\times5=6.28\times10^{-3}\,\text{T}.
★ Remember
  • Use: A solenoid produces a nearly uniform magnetic field inside it.
  • Stronger field: Inserting a soft-iron core can produce a larger field.

Force Between Two Parallel Currents and the Ampere

Force between parallel conductors

  • Setup: Two long parallel conductors, separated by distance dd, carry currents IaI_a and IbI_b.
  • Field at conductor bb: The field produced by conductor aa has magnitude Ba=μ0Ia/(2πd)B_a=\mu_0 I_a/(2\pi d).
  • Force on a segment: A length LL of conductor bb experiences force Fba=IbLBa=μ0IaIbL/(2πd)F_{ba}=I_bLB_a=\mu_0 I_aI_bL/(2\pi d).
  • Force pair: The forces have equal magnitudes and opposite directions: Fba=−Fab\mathbf{F}_{ba}=-\mathbf{F}_{ab}.
  • Direction: Currents in the same direction attract; currents in opposite directions repel.
Parallel current-carrying conductors, showing the magnetic field from conductor a at conductor b.
Parallel current-carrying conductors, showing the magnetic field from conductor aa at conductor bb.
Parallel Currents vs Like Charges
PointParallel currentsLike charges
InteractionCurrents flowing in the same direction attract.Charges with the same sign repel.
Force per unit length between parallel conductors
fba=FbaL=μ0IaIb2πdf_{ba}=\frac{F_{ba}}{L}=\frac{\mu_0 I_aI_b}{2\pi d}

fbaf_{ba} is the magnitude of the force on conductor bb due to conductor aa, per unit length.

Newton’s third law and electromagnetic momentum

  • Steady currents: Equal and opposite forces on the two conductors agree with Newton’s third law.
  • Time-dependent situations: Newton’s third law need not hold for forces between charges or conductors alone; momentum is conserved when electromagnetic-field momentum is included.
Definition

Ampere (classical force-based definition) — The steady current in each of two very long, straight, parallel conductors of negligible cross-section, one metre apart in vacuum, that produces a force of 2×10−7 N2\times10^{-7}\,\text{N} per metre on each conductor.

Ampere and coulomb

  • Unit status: The ampere is one of the seven SI base units.
  • Adoption: The force-based definition of the ampere was adopted in 19461946.
  • Practical measurement: A current balance measures the mechanical force. Practical setups use suitable coils and reduce the effects of Earth’s magnetic field and other stray fields.
  • Coulomb: A steady current of 1 A1\,\text{A} transfers 1 C1\,\text{C} of charge through a conductor’s cross-section in 1 s1\,\text{s}.
Force on a current-carrying conductor
F=I l×B\mathbf{F}=I\,\mathbf{l}\times\mathbf{B}

For a straight conductor in a magnetic field; the vector direction follows the cross product.

Magnitude of force on a current-carrying conductor
F=IlBsin⁡θF=IlB\sin\theta

Here θ\theta is the angle between the current direction and the magnetic field.

Force per unit length in a magnetic field
f=Fl=IBsin⁡θf=\frac{F}{l}=IB\sin\theta

Use to find the force per length on a straight current-carrying wire.

Example: Earth’s magnetic field and a wire

  • Given: Earth’s horizontal field is 3.0×10−5 T3.0\times10^{-5}\,\text{T}, directed from geographic south to north; the wire carries 1 A1\,\text{A}.
  • Current east to west: The current is perpendicular to the field, so f=IB=3.0×10−5 N m−1f=IB=3.0\times10^{-5}\,\text{N\,m}^{-1}. The force is downward.
  • Current south to north: The current is parallel to the field, so θ=0∘\theta=0^\circ and f=0f=0.
  • Implication: Earth’s field can significantly affect force measurements, so it must be accounted for when standardising the ampere.

State the magnetic-field pattern inside and outside an ideal long solenoid.

Answer: Inside, the field is strong, uniform, and parallel to the axis; outside, it is approximately zero.

What is the force per unit length between two long parallel conductors?

Answer: f=μ0IaIb/(2πd)f=\mu_0 I_aI_b/(2\pi d); same-direction currents attract, while opposite-direction currents repel.

Quick recap

  • A long solenoid has a strong, uniform axial field inside and an almost zero field outside.
  • The field inside a long solenoid is B=μ0nIB=\mu_0 nI, where nn is the number of turns per unit length.
  • Parallel currents attract; antiparallel currents repel.
  • The force per unit length between parallel conductors is f=μ0IaIb/(2πd)f=\mu_0 I_aI_b/(2\pi d).
  • The classical force-based ampere uses two parallel conductors one metre apart in vacuum and was adopted in 19461946.
  • A current-carrying wire experiences vector force F=I l×B\mathbf{F}=I\,\mathbf{l}\times\mathbf{B}, with magnitude F=IlBsin⁡θF=IlB\sin\theta.
Lecture 6

Torque on Current Loop, Magnetic Dipole

Reference video · Lecture 6Torque on Current Loop, Magnetic Dipole

Torque on a Rectangular Current Loop

Loop with its plane parallel to the field

  • Forces: In a uniform magnetic field, the two arms parallel to the field experience no force. The other two arms experience equal and opposite forces of magnitude F=IbBF=IbB.
  • Net force: The forces cancel, so the loop has zero net force; because they act at different positions, they form a couple and rotate the loop.
  • Torque: For a rectangular loop with sides aa and bb, its area is A=abA=ab and the torque magnitude is τ=IAB\tau=IAB in this orientation.
Current loop in a uniform field: opposite forces form a couple and rotate the loop.
Current loop in a uniform field: opposite forces form a couple and rotate the loop.

Loop at an angle to the field

  • Angle: Let θ\theta be the angle between the loop’s area vector and the magnetic field. The forces on two opposite arms cancel; the other equal, opposite forces form a couple.
  • Torque magnitude: The perpendicular separation of the forces decreases with angle, giving τ=IABsin⁡θ\tau=IAB\sin\theta.
  • Zero torque: When θ=0\theta=0 or π\pi, the area vector is parallel or antiparallel to the field, and the torque is zero.
Magnetic moment and torque
m=NIA,τ=m×B\mathbf{m}=NI\mathbf{A},\qquad \boldsymbol{\tau}=\mathbf{m}\times\mathbf{B}

The area vector points normal to the loop, with direction given by the right-hand thumb rule. For NN closely wound turns, use the total magnetic moment.

Equilibrium and alignment

  • Magnitude: m=NIAm=NIA; its SI unit is A m2\mathrm{A\,m^2} and its dimensions are current ×\times area.
  • Stable equilibrium: m\mathbf{m} parallel to B\mathbf{B}. A small displacement produces a restoring torque.
  • Unstable equilibrium: m\mathbf{m} antiparallel to B\mathbf{B}. A small displacement produces a torque that moves it farther from this orientation.
  • Alignment: The torque tends to align a magnetic dipole with the external field, just as an electric dipole experiences τ=pe×E\boldsymbol{\tau}=\mathbf{p}_e\times\mathbf{E}.
Area vector and magnetic forces on opposite arms of a rectangular current loop.
Area vector and magnetic forces on opposite arms of a rectangular current loop.

Applications of torque and equilibrium

  • Rotation about a vertical axis: A horizontal current loop cannot be made to rotate about its vertical axis using a uniform magnetic field; its torque is always in the plane of the loop.
  • Maximum flux: In stable equilibrium, the loop’s area vector aligns with the external field. The loop’s field then reinforces the external field, making the total flux through it maximum.
  • Flexible loop: A flexible current-carrying loop tends toward a circular shape, which encloses the greatest area for a fixed perimeter and can therefore maximise flux.

Worked numerical example

  • Given: A 100100-turn circular coil has radius R=0.10 mR=0.10\,\mathrm{m} and current I=3.2 AI=3.2\,\mathrm{A}.
  • Field at centre: B=μ0NI2R=2.0×10−3 TB=\dfrac{\mu_0NI}{2R}=2.0\times10^{-3}\,\mathrm{T}.
  • Magnetic moment: m=NIπR2≈10 A m2m=NI\pi R^2\approx10\,\mathrm{A\,m^2}. In an external field of 2 T2\,\mathrm{T}, the torque is 00 at θ=0\theta=0 and 20 N m20\,\mathrm{N\,m} at θ=90∘\theta=90^\circ.
  • Rotation: If the coil starts from rest at θ=0\theta=0 and reaches 90∘90^\circ, then 12Jω2=mB\tfrac12 J\omega^2=mB; for J=0.1 kg m2J=0.1\,\mathrm{kg\,m^2}, ω=20 s−1\omega=20\,\mathrm{s^{-1}}.

Circular Current Loop as a Magnetic Dipole

Magnetic field far from a circular loop

  • On the axis: A circular loop of radius RR, current II, and centre-to-point distance xx produces B=μ0IR22(x2+R2)3/2B=\dfrac{\mu_0IR^2}{2(x^2+R^2)^{3/2}}.
  • Far-field condition: For x≫Rx\gg R, the radius term in the denominator is negligible. With A=πR2A=\pi R^2 and m=IAm=IA, the axial field is B≃μ04π2mx3B\simeq\dfrac{\mu_0}{4\pi}\dfrac{2m}{x^3}, directed along the dipole axis.
  • In the plane of the loop: Far from the loop, the field magnitude is B≃μ04πmx3B\simeq\dfrac{\mu_0}{4\pi}\dfrac{m}{x^3}; its direction is opposite to m\mathbf{m}.
Current-loop dipole vs electric dipole
PointMagnetic dipoleElectric dipole
Dipole momentm=IA\mathbf{m}=I\mathbf{A} for one turn; NIAN I\mathbf{A} for NN turnspe\mathbf{p}_e
Far-field analogyAxial field varies as 1/x31/x^3 and is proportional to 2m2mAxial electric field varies as 1/x31/x^3 and is proportional to 2pe2p_e
Elementary sourceA current loop acts as a magnetic dipole; magnetic monopoles have not been observedAn electric dipole is made from positive and negative charges

Magnetism and circulating currents

  • Dipole model: Any planar current loop behaves like a magnetic dipole at large distances, with moment m=IA\mathbf{m}=I\mathbf{A}.
  • Monopoles: Unlike electric charges, isolated magnetic monopoles have not been observed; the current loop is treated as the elementary magnetic element.
  • Intrinsic moments: Electrons and protons have intrinsic magnetic moments that are not explained simply by circulating currents.

Why does a current loop experience torque but no net force in a uniform magnetic field?

Answer: Forces on opposite arms cancel in pairs, so the net force is zero. The non-collinear equal and opposite forces form a couple, producing torque.

State the magnetic moment and torque of a coil with NN turns.

Answer: The magnetic moment is m=NIA\mathbf{m}=NI\mathbf{A}, and its torque in a magnetic field is τ=m×B\boldsymbol{\tau}=\mathbf{m}\times\mathbf{B}.

How does a current loop behave as a magnetic dipole at large distances?

Answer: Its moment is m=IA\mathbf{m}=I\mathbf{A}. Far on its axis, B≃μ04π2mx3B\simeq\dfrac{\mu_0}{4\pi}\dfrac{2m}{x^3}; far in its plane, the magnitude is B≃μ04πmx3B\simeq\dfrac{\mu_0}{4\pi}\dfrac{m}{x^3}, opposite to m\mathbf{m}.

Quick recap

  • A current loop in a uniform field has zero net force but generally experiences torque.
  • For NN turns, m=NIA\mathbf{m}=NI\mathbf{A} and τ=m×B\boldsymbol{\tau}=\mathbf{m}\times\mathbf{B}.
  • Torque is zero when m\mathbf{m} is parallel or antiparallel to B\mathbf{B}; parallel alignment is stable.
  • At large distances, a planar current loop behaves like a magnetic dipole, with field varying as 1/x31/x^3.
  • Magnetic monopoles have not been observed, though elementary particles such as electrons and protons possess intrinsic magnetic moments.
Lecture 7

The Moving Coil Galvanometer

Reference video · Lecture 7The Moving Coil Galvanometer

Principle and Construction

Torque and deflection
τ=NIAB,kϕ=NIAB,ϕ=NABkI\tau=NIAB,\qquad k\phi=NIAB,\qquad \phi=\frac{NAB}{k}I

At equilibrium, magnetic torque balances spring torque. Here, NN is the number of turns, AA the coil area, BB the magnetic-field strength, and kk the spring’s torsional constant.

Using the galvanometer as a current detector

  • Detection: The galvanometer can show whether current is flowing in a circuit.
  • Direction: With zero current, the pointer is at the centre of the scale; opposite current directions deflect it to opposite sides.

Converting a Galvanometer into an Ammeter

Resistance of the shunted galvanometer
Req=RGrsRG+rs≃rsR_{\text{eq}}=\frac{R_G r_s}{R_G+r_s}\simeq r_s

The galvanometer resistance RGR_G is in parallel with the shunt resistance rsr_s. When RG≫rsR_G\gg r_s, the combined resistance is approximately the shunt resistance.

Current Sensitivity

Current sensitivity
ϕI=NABk\frac{\phi}{I}=\frac{NAB}{k}

Deflection per unit current.

Converting a Galvanometer into a Voltmeter

Voltage sensitivity
ϕV=NABkR\frac{\phi}{V}=\frac{NAB}{kR}

Deflection per unit voltage, with RR the large series resistance.

Current Sensitivity vs Voltage Sensitivity
PointCurrent sensitivityVoltage sensitivity
DefinitionDeflection per unit current, ϕ/I\phi/I.Deflection per unit voltage, ϕ/V\phi/V.
ExpressionNAB/kNAB/k.NAB/(kR)NAB/(kR).
Effect of doubling turnsIt doubles if N→2NN\to2N.It can remain unchanged if the resistance also doubles, R→2RR\to2R.
⚠ Common mistake

Do not assume that increasing current sensitivity always increases voltage sensitivity: more turns can also increase the coil’s resistance, leaving voltage sensitivity unchanged.

How is a galvanometer converted into an ammeter?

Answer: Connect a small shunt resistance in parallel with the galvanometer coil, then connect the arrangement in series with the circuit.

How is a galvanometer converted into a voltmeter?

Answer: Connect a large resistance in series with the galvanometer, then connect the arrangement in parallel across the section being measured.

Quick recap

  • A current-carrying coil in a radial magnetic field experiences torque; the spring’s restoring torque sets its deflection.
  • At equilibrium, kϕ=NIABk\phi=NIAB, so deflection is proportional to current.
  • A shunt in parallel converts a galvanometer into a low-resistance ammeter, connected in series.
  • A large resistance in series converts a galvanometer into a high-resistance voltmeter, connected in parallel.
  • Current sensitivity is NAB/kNAB/k; voltage sensitivity is NAB/(kR)NAB/(kR).
  • Increasing the number of turns need not increase voltage sensitivity if the resistance increases proportionally.
Lecture 8

Summary

Reference video · Lecture 8Summary

Lorentz Force

  • Lorentz force: A charge moving in electric and magnetic fields experiences F=q(E+v×B)\mathbf{F}=q(\mathbf{E}+\mathbf{v}\times\mathbf{B}).
  • Magnetic component: It acts perpendicular to both the particle’s velocity and the magnetic field, so it does no work.

Force on a Current-Carrying Conductor

  • Conductor force: A straight current-carrying conductor in an external magnetic field experiences F=Iℓ×B\mathbf{F}=I\boldsymbol{\ell}\times\mathbf{B}.
  • Direction: The vector ℓ\boldsymbol{\ell} points along the current; the force is perpendicular to both the current and the field.

Charged-Particle Motion and Cyclotron Frequency

  • Path: A charged particle moving perpendicular to a uniform magnetic field follows a circular path; a parallel velocity component produces helical motion.
  • Cyclotron frequency: νc=qB/(2πm)\nu_c=qB/(2\pi m), independent of the particle’s speed and orbit radius.

Biot–Savart Law

  • Current element: The Biot–Savart law gives the magnetic field produced by a steady current element at a point in space.
  • Dependence: The field is proportional to current and element length, varies as 1/r21/r^2, and is directed perpendicular to the plane containing the element and displacement vector.

Magnetic Field of a Circular Current Loop

  • Axial field: A circular loop of radius RR carrying current II produces B=μ0IR22(x2+R2)3/2B=\frac{\mu_0 I R^2}{2(x^2+R^2)^{3/2}} at axial distance xx.
  • At the centre: Setting x=0x=0 gives B0=μ0I2RB_0=\frac{\mu_0 I}{2R}; the field direction follows the right-hand thumb rule.

Ampere’s Circuital Law

  • Circuital law: The line integral of the magnetic field around a closed loop is ∮B⋅dℓ=μ0Ie\oint\mathbf{B}\cdot d\boldsymbol{\ell}=\mu_0 I_e, where IeI_e is the net enclosed current.
  • Sign and use: The right-hand rule sets the sign of enclosed current; the law is especially useful for systems with symmetry.

Magnetic Field of a Long Straight Wire

  • Field magnitude: At distance rr from a long straight wire carrying current II, B=μ0I2πrB=\frac{\mu_0 I}{2\pi r}.
  • Field lines: They form concentric circles around the wire, with direction given by the right-hand rule.

Magnetic Field of a Solenoid

  • Solenoid: A long, closely wound helical coil produces a strong, nearly uniform magnetic field inside and a negligible field outside.
  • Field strength: For turn density nn and current II, the interior field is B=μ0nIB=\mu_0 nI, directed along the solenoid’s axis.

Interaction Between Parallel Currents

  • Current interaction: Two long parallel conductors carrying currents in the same direction attract; currents in opposite directions repel.
  • Force per unit length: For separation dd, its magnitude is FL=μ0IaIb2πd\frac{F}{L}=\frac{\mu_0 I_a I_b}{2\pi d}.

Magnetic Moment and Torque on a Current Loop

  • Magnetic moment: A planar coil with NN turns, current II, and area AA has moment m=NIA n^\mathbf{m}=NIA\,\hat{\mathbf{n}}, with direction set by the right-hand rule.
  • Torque: In a uniform field, the coil experiences τ=m×B\boldsymbol{\tau}=\mathbf{m}\times\mathbf{B} and no net force; its torque is zero when its moment is parallel or antiparallel to the field.

Moving-Coil Galvanometer

Quantities, Dimensions and Units
QuantitySymbolNatureDimensionsSI unit / note
Permeability of free spaceμ0\mu_0Scalar[MLT−2A−2][MLT^{-2}A^{-2}]T m A−1\mathrm{T\,m\,A^{-1}}; μ0=4π×10−7 T m A−1\mu_0=4\pi\times10^{-7}\ \mathrm{T\,m\,A^{-1}}
Magnetic fieldB\mathbf{B}Vector[MT−2A−1][MT^{-2}A^{-1}]Tesla (T\mathrm{T})
Magnetic momentm\mathbf{m}Vector[L2A][L^2A]A m2\mathrm{A\,m^2} or J/T\mathrm{J/T}
Torsion constantkkScalar[ML2T−2][ML^2T^{-2}]N m rad−1\mathrm{N\,m\,rad^{-1}}; used in a moving-coil galvanometer

Key Conceptual Points

Electrostatic vs Magnetic Field Lines
PointElectrostatic field linesMagnetic field lines
Shape / endpointsStart at positive charges and end at negative charges, or extend to infinity.Always form closed loops.

Limits and Meaning of the Laws

  • Steady-current scope: The chapter's discussion applies to currents that do not vary with time.
  • Changing currents: Newton's third law holds only when momentum carried by the electromagnetic field is included.
  • Electricity and magnetism: In a frame moving instantaneously with a charge, the magnetic part of the Lorentz force can vanish; an appropriate electric field accounts for the force. This reflects the linked nature of electricity and magnetism, not a universal preferred frame.
  • Law connection: Ampere's circuital law is derivable from Biot–Savart law, much as Gauss's law is related to Coulomb's law.

Quick recap

  • The Lorentz force combines electric and magnetic forces; the magnetic part does no work.
  • Biot–Savart law gives the field from a current element; Ampere's law relates field circulation to enclosed current.
  • A long wire has circular field lines, a long solenoid has B=μ0nIB=\mu_0nI, and a circular loop has B=μ0I2RB=\frac{\mu_0I}{2R} at its centre.
  • Parallel currents attract; anti-parallel currents repel.
  • A current loop has magnetic moment m=NIAm=NIA and torque τ=m×B\boldsymbol{\tau}=\mathbf{m}\times\mathbf{B}, but zero net force in a uniform field.
  • A galvanometer becomes an ammeter with a low parallel shunt and a voltmeter with a high series resistance.

Physics — ALL CHAPTERS

1

Electric Charges And Fields

View

2

Electrostatic Potential And Capacitance

View

3

Current Electricity

View

4

Moving Charges And Magnetism

View

5

Magnetism And Matter

View

6

Electromagnetic Induction

View

7

Alternating Current

View

8

Electromagnetic Waves

View

1

Ray Optics And Optical Instruments

View

2

Wave Optics

View

3

Dual Nature Of Radiation And Matter

View

4

Atoms

View

5

Nuclei

View

6

Semiconductor Electronics: Materials, Devices And Simple Circuits

View