Class 12 PCB . Physics . Physics Part I . Magnetism and Matter

Chapter 5: Magnetism And Matter

Ch 5

Physics

Class 12 PCB

Lecture 1

Introduction

Reference video · Lecture 1Introduction

Magnetism and Magnetic Poles

Definition

Magnetism — A natural phenomenon associated with magnetic fields, found from atomic to planetary and galactic scales.

Basic facts

  • Magnetic fields: Moving electric charges and currents produce magnetic fields; this connection was established by Oersted, Ampere, Biot and Savart.
  • Earth: Earth behaves approximately like a magnet, with its magnetic field directed from geographic south towards geographic north.
  • Suspended magnet: A freely suspended bar magnet aligns approximately north–south. Its north pole points towards geographic north and its south pole towards geographic south.
  • Pole interaction: Like poles repel; unlike poles attract.
  • No isolated poles: Breaking a bar magnet produces two smaller magnets, each with both a north and a south pole. Magnetic monopoles do not exist.
  • Magnetic materials: Magnets can be made from iron and its alloys.
  • Material classification: Magnetic materials are classified as diamagnetic, paramagnetic or ferromagnetic.
Interactions between magnetic poles
Magnetic polesInteraction
North–north or south–southRepel
North–southAttract

Magnetic Field Lines

Definition

Magnetic field lines — Imaginary curves that represent the direction and relative strength of a magnetic field.

Field-line properties

  • Closed loops: Magnetic field lines form continuous closed loops. Electric dipole field lines begin on positive charge and end on negative charge or extend to infinity.
  • Direction: The tangent to a field line at any point gives the direction of the magnetic field B\mathbf{B} there.
  • Strength: More field lines crossing a unit area indicate a stronger magnetic field; the field is stronger where the lines are denser.
  • No intersection: Field lines never intersect, because the magnetic field has only one direction at a given point.
  • Mapping: The orientation of a small compass needle at different positions indicates the local field direction.
  • Terminology: “Lines of force” is avoided because magnetic field lines do not indicate the force direction on a moving charge.
Iron filings reveal the magnetic field pattern around a bar magnet, resembling a magnetic dipole.
Iron filings reveal the magnetic field pattern around a bar magnet, resembling a magnetic dipole.
Magnetic field lines of a bar magnet and finite solenoid compared with the electric field of a dipole.
Magnetic field lines of a bar magnet and finite solenoid compared with the electric field of a dipole.

Bar Magnet as an Equivalent Solenoid

The equivalence

  • Current-loop model: A current loop acts as a magnetic dipole. Ampere’s hypothesis explains magnetic phenomena in terms of circulating currents.
  • Similar fields: A bar magnet and a current-carrying solenoid produce similar magnetic field patterns, including at large distances along their axes.
  • Cutting a magnet: Each half becomes a smaller magnet with both poles, just as cutting a solenoid gives smaller solenoids with weaker magnetic properties.
  • Magnetic moment: A bar magnet’s magnetic moment equals that of an equivalent solenoid producing the same magnetic field.
Far axial field of a bar magnet or solenoid
B=μ04π2mr3B=\frac{\mu_0}{4\pi}\frac{2m}{r^3}

At a large axial distance rr, mm is the magnetic moment.

Axial field of a finite solenoid and a magnetic needle in a uniform magnetic field.
Axial field of a finite solenoid and a magnetic needle in a uniform magnetic field.

Quick recap

  • Earth behaves approximately like a magnet; a freely suspended magnet aligns approximately north–south.
  • Like magnetic poles repel, unlike poles attract, and isolated magnetic poles do not exist.
  • Magnetic materials are classified as diamagnetic, paramagnetic or ferromagnetic.
  • Magnetic field lines form closed loops, do not intersect, and their tangent gives the direction of B\mathbf{B}.
  • Field-line density per unit area indicates magnetic-field strength.
  • A bar magnet and an equivalent solenoid have the same magnetic moment when they produce the same field.
  • The far axial field varies as 1/r31/r^3: B=μ04π2mr3B=\frac{\mu_0}{4\pi}\frac{2m}{r^3}.
Lecture 2

The dipole in a uniform magnetic field

Reference video · Lecture 2The dipole in a uniform magnetic field

Torque and Potential Energy of a Magnetic Dipole

Definition

Magnetic dipole in a uniform field — A magnetic dipole with moment m\mathbf{m} in a uniform magnetic field B\mathbf{B} experiences torque but no net force.

Torque on a magnetic dipole
τ=m×B,τ=mBsin⁡θ\boldsymbol{\tau}=\mathbf{m}\times\mathbf{B},\qquad \tau=mB\sin\theta

Here θ\theta is the angle between m\mathbf{m} and B\mathbf{B}; the torque tends to align the dipole with the field.

Magnetic potential energy
Um=−m⋅B=−mBcos⁡θU_m=-\mathbf{m}\cdot\mathbf{B}=-mB\cos\theta

The zero of potential energy is chosen at θ=90∘\theta=90^\circ, where the dipole is perpendicular to the field.

Dipole orientations in a uniform field
OrientationEnergyStability
θ=0∘\theta=0^\circ; m\mathbf{m} parallel to B\mathbf{B}Um=−mBU_m=-mB (minimum)Most stable
θ=90∘\theta=90^\circ; m\mathbf{m} perpendicular to B\mathbf{B}Um=0U_m=0Reference zero of energy
θ=180∘\theta=180^\circ; m\mathbf{m} opposite to B\mathbf{B}Um=+mBU_m=+mB (maximum)Most unstable
A magnetised needle at different orientations around a dipole illustrates stable and unstable configurations.
A magnetised needle at different orientations around a dipole illustrates stable and unstable configurations.

Consequences and Magnetic Bar Examples

Key facts

  • Cutting a bar magnet: A cut across its length or along its length produces two magnets, each with a north and a south pole.
  • Uniform field: A dipole experiences torque but no net force because the forces on its two poles balance.
  • Non-uniform field: An iron nail near a bar magnet becomes magnetically induced and experiences both force and torque; the net force is attractive.
  • No poles in every field: A magnetic field need not come from a dipole with north and south poles; examples include a toroid and an infinitely long straight conductor.
  • Finding whether both bars are magnets: Try different ends together. Repulsion in any arrangement proves both are magnetised; attraction alone does not.

Identifying which bar is magnetised

  • Field strength along a bar magnet: It is strongest near the poles (ends) and weakest near the centre.
  • Test: Bring an end of bar A near an end of bar B, then near B’s middle. If the force disappears at B’s middle, B is the magnet; if it does not change, A is the magnet.

The Electrostatic Analogy

Dipole correspondence

  • Replacement rules: Convert electric-dipole results to magnetic-dipole results using E→B\mathbf{E}\to\mathbf{B}, p→m\mathbf{p}\to\mathbf{m}, and 1/(4πε0)→μ0/(4π)1/(4\pi\varepsilon_0)\to\mu_0/(4\pi).
  • Short-dipole condition: The field formulas below apply when the observation distance rr is much greater than the magnet’s size ll.
Equatorial magnetic field
BE=−μ0m4πr3\mathbf{B}_E=-\frac{\mu_0\mathbf{m}}{4\pi r^3}

The equatorial field points opposite to the magnetic moment.

Axial magnetic field
BA=μ04π2mr3\mathbf{B}_A=\frac{\mu_0}{4\pi}\frac{2\mathbf{m}}{r^3}

The axial field points along the magnetic moment.

Electric and magnetic dipoles
QuantityElectric dipoleMagnetic dipole
Dipole momentp\mathbf{p}m\mathbf{m}
Field coefficient1/(4πε0)1/(4\pi\varepsilon_0)μ0/(4π)\mu_0/(4\pi)
Equatorial field−p/(4πε0r3)-\mathbf{p}/(4\pi\varepsilon_0r^3)−μ0m/(4πr3)-\mu_0\mathbf{m}/(4\pi r^3)
Axial field2p/(4πε0r3)2\mathbf{p}/(4\pi\varepsilon_0r^3)2μ0m/(4πr3)2\mu_0\mathbf{m}/(4\pi r^3)
Torque in an external fieldp×E\mathbf{p}\times\mathbf{E}m×B\mathbf{m}\times\mathbf{B}
Potential energy in an external field−p⋅E-\mathbf{p}\cdot\mathbf{E}−m⋅B-\mathbf{m}\cdot\mathbf{B}

Why does a magnetised needle in a uniform field have torque but no net force, while an iron nail near a bar magnet is attracted?

Answer: In a uniform field, forces on the dipole balance but produce torque. Near a bar magnet the field is non-uniform; the nail is magnetically induced and experiences a net attractive force as well as torque.

Quick recap

  • A magnetic dipole in a uniform field experiences torque τ=m×B\boldsymbol{\tau}=\mathbf{m}\times\mathbf{B} but no net force.
  • Its potential energy is Um=−m⋅BU_m=-\mathbf{m}\cdot\mathbf{B}, with the zero chosen at 90∘90^\circ.
  • Parallel alignment is most stable; antiparallel alignment is most unstable.
  • A non-uniform magnetic field can exert a net force on an induced dipole, such as an iron nail.
  • At distances much greater than magnet size, the axial and equatorial fields vary as 1/r31/r^3.
  • Electric- and magnetic-dipole formulas correspond under E→B\mathbf{E}\to\mathbf{B}, p→m\mathbf{p}\to\mathbf{m}, and 1/(4πε0)→μ0/(4π)1/(4\pi\varepsilon_0)\to\mu_0/(4\pi).
Lecture 3

Magnetism and Gauss’s Law

Reference video · Lecture 3Magnetism and Gauss’s Law

Magnetic Flux Through a Closed Surface

Magnetic flux and its net value

  • Magnetic flux through a small area element is the dot product of the magnetic field and the area vector: ΔϕB=B⋅ΔS\Delta\phi_B=\mathbf{B}\cdot\Delta\mathbf{S}.
  • Closed surface: Magnetic field lines enter and leave in equal amounts, so the total magnetic flux is zero.
  • Area vector: For a closed surface, each small area vector points outward.
ϕB=∑allB⋅ΔS=0\phi_B=\sum_{\text{all}}\mathbf{B}\cdot\Delta\mathbf{S}=0
Add the flux contributions from all small surface elements.
∮SB⋅dS=0\oint_S\mathbf{B}\cdot d\mathbf{S}=0
The net magnetic flux through any closed surface SS is zero.
Gauss’s Law: Magnetism vs Electrostatics
PointMagnetismElectrostatics
Flux through a closed surface∮SB⋅dS=0\oint_S\mathbf{B}\cdot d\mathbf{S}=0∮SE⋅dS=qenclosed/ε0\oint_S\mathbf{E}\cdot d\mathbf{S}=q_{\text{enclosed}}/\varepsilon_0
Sources and sinksNo isolated magnetic poles are known; magnetic field lines form closed loops.Electric charges act as sources or sinks of electric field lines.
Closed field-line loopsMagnetic field lines can form closed loops; static loops enclose a region across which current passes.Electrostatic field lines never form closed loops, even if the loop encloses charges.

Why the magnetic flux is zero

  • No monopoles: Isolated north or south magnetic poles have not been observed.
  • No magnetic sources or sinks: Magnetic field lines do not begin or end at a point; they form closed loops.
  • Basic magnetic elements: A magnetic dipole or a current loop is the simplest magnetic element; magnetic phenomena can be described using dipoles and/or current loops.

Rules for Magnetic Field-Line Diagrams

How to check a field-line diagram

  • No crossing: Field lines cannot cross because the field would have two directions at one point.
  • No isolated ends: Magnetic lines cannot emanate from, or terminate at, a single pole.
  • Closed magnetic loops: Magnetic lines may form closed loops; for a static magnetic field, a loop must enclose a region carrying current.
  • Electrostatic lines: They never form closed loops, whether or not the loop encloses charges.
  • Zero-flux test: Any closed surface must have equal magnetic flux entering and leaving it.
  • Field-line force: A magnetic field line gives the direction of the field, not the direction of force on every particle.
Check the Diagrams
PatternVerdictReason or correct interpretation
Radial lines emerging from a pointWrong for magnetismViolates zero net flux; can represent the electric field of a positively charged long wire.
Crossing field linesWrongThe field direction would be ambiguous at the crossing.
Lines confined in a toroidCorrectClosed magnetic loops encircle the current-carrying region; the field is inside the toroid.
Solenoid lines perfectly straight and confined, including outsideWrongThe field lines curve out at the ends and join to make closed loops.
Field around a bar magnetCorrectLines go from north to south outside the magnet and return from south to north inside it.
Lines emerging from one plate and ending on anotherWrong for magnetismThe non-zero flux pattern represents the electrostatic field of oppositely charged plates.
Precisely straight lines between pole pieces, with no fringingWrongField lines fringe at the ends; perfect confinement would violate Ampere’s law. Fringing also occurs for electric field lines.
Radial field lines from a point: an impossible magnetic-field pattern.
Radial field lines from a point: an impossible magnetic-field pattern.
Crossing field lines: the field direction would be ambiguous at the intersection.
Crossing field lines: the field direction would be ambiguous at the intersection.
Magnetic field lines form loops within a toroid.
Magnetic field lines form loops within a toroid.
A bar magnet’s field lines form closed paths, including inside the magnet.
A bar magnet’s field lines form closed paths, including inside the magnet.

Further Implications

Magnetic force, monopoles and magnetic moments

  • Force on a moving charge: The magnetic force is perpendicular to the magnetic field, so field lines are not generally lines of force: F=qv×B\mathbf{F}=q\mathbf{v}\times\mathbf{B}.
  • If monopoles existed: The magnetic-flux law would have a non-zero right-hand side equal to the enclosed magnetic charge.
  • Self-interaction: A bar magnet does not exert a torque on itself; a wire element does not exert a force on itself through its own field.
  • Same-wire interaction: Different elements of the same wire can exert forces or torques on one another; for a straight wire, this force is zero.
  • Neutral systems: A system can have zero net charge yet a non-zero magnetic moment, because its current loops can have a non-zero combined moment.
  • Paramagnetic example: Atoms in paramagnetic materials can have a net magnetic dipole moment even though each atom has zero net charge.
∮SB⋅dS=qm,enclosed\oint_S\mathbf{B}\cdot d\mathbf{S}=q_{m,\text{enclosed}}
If magnetic monopoles existed, the flux would equal the enclosed magnetic charge qmq_m.

Why are magnetic field lines not generally lines of force on a moving charge?

Answer: The magnetic force is perpendicular to the field direction: F=qv×B\mathbf{F}=q\mathbf{v}\times\mathbf{B}.

How would Gauss’s law for magnetism change if monopoles existed?

Answer: The flux through a closed surface would equal the magnetic charge enclosed: ∮SB⋅dS=qm,enclosed\oint_S\mathbf{B}\cdot d\mathbf{S}=q_{m,\text{enclosed}}.

Can a system with zero net charge still have a magnetic moment?

Answer: Yes. Its current loops can have magnetic moments whose combined value is non-zero, even when the system’s net charge is zero; paramagnetic atoms are an example.

Quick recap

  • The magnetic flux through a small area element is ΔϕB=B⋅ΔS\Delta\phi_B=\mathbf{B}\cdot\Delta\mathbf{S}.
  • The net magnetic flux through every closed surface is zero.
  • Magnetic field lines form closed loops because isolated magnetic poles are not known to exist.
  • Magnetic field lines never cross or begin and end at isolated points; electrostatic lines never form closed loops.
  • A magnetic field line shows field direction, not the force direction on a moving charge.
  • A neutral system, including paramagnetic atoms, can still have a non-zero magnetic moment.
Lecture 4

Magnetisation and Magnetic Intensity

Reference video · Lecture 4Magnetisation and Magnetic Intensity

Magnetisation

Definition

Magnetisation — Magnetisation MM is the net magnetic moment of a material per unit volume.

  • Origin: Atomic magnetic moments add vectorially; their sum may produce a non-zero net moment.
  • Nature and unit: MM is a vector with dimensions L−1AL^{-1}A and SI unit A m−1\mathrm{A\,m^{-1}}.
Magnetisation
M=mnetVM=\frac{m_{\text{net}}}{V}

Here mnetm_{\text{net}} is the net magnetic moment and VV is the sample volume.

Magnetic Intensity and Magnetic Field

Field in a solenoid

  • Without a magnetic core: A long solenoid with nn turns per unit length carrying current II produces field B0=μ0nIB_0=\mu_0 nI inside it.
  • With a magnetic core: The material contributes an additional field Bm=μ0MB_m=\mu_0 M, so the total field is B=B0+BmB=B_0+B_m.
  • Vacuum permeability: μ0\mu_0 is the permeability of free space.
Definition

Magnetic intensity — Magnetic intensity HH represents the field contribution associated with external sources, separated from the material’s magnetisation.

Magnetic intensity
H=Bμ0−MH=\frac{B}{\mu_0}-M

HH has the same dimensions and SI unit as MM: L−1AL^{-1}A and A m−1\mathrm{A\,m^{-1}}.

Total magnetic field
B=μ0(H+M)B=\mu_0(H+M)

For a solenoid, H=nIH=nI; the total field combines the external contribution and the material magnetisation.

Susceptibility and Permeability

Definition

Magnetic susceptibility — Magnetic susceptibility χ\chi measures how strongly a material becomes magnetised in response to magnetic intensity.

Magnetic susceptibility
M=χHM=\chi H

χ\chi is dimensionless.

Relative and absolute permeability

  • Relative permeability: μr=1+χ\mu_r=1+\chi is dimensionless and is analogous to the dielectric constant in electrostatics.
  • Permeability: μ=μ0μr=μ0(1+χ)\mu=\mu_0\mu_r=\mu_0(1+\chi); it has the same dimensions and units as μ0\mu_0.
Field in a magnetic material
B=μ0(1+χ)H=μ0μrH=μHB=\mu_0(1+\chi)H=\mu_0\mu_rH=\mu H

Combining M=χHM=\chi H with B=μ0(H+M)B=\mu_0(H+M) gives these equivalent forms.

Worked Example: Solenoid with a Magnetic Core

Given: μr=400\mu_r=400, n=1000 m−1n=1000\,\mathrm{m^{-1}}, I=2 AI=2\,\mathrm{A}

  • Intensity: H=nI=1000×2=2.0×103 A m−1H=nI=1000\times2=2.0\times10^3\,\mathrm{A\,m^{-1}}.
  • Magnetic field: B=μ0μrH≈1.0 TB=\mu_0\mu_rH\approx1.0\,\mathrm{T}.
  • Magnetisation: M=(μr−1)H=399(2.0×103)≈8.0×105 A m−1M=(\mu_r-1)H=399(2.0\times10^3)\approx8.0\times10^5\,\mathrm{A\,m^{-1}}.
  • Magnetising current: The extra current in an empty solenoid needed to produce the same field is Im=Bμ0n−I≈794 AI_m=\frac{B}{\mu_0n}-I\approx794\,\mathrm{A}.

Magnetic Properties of Materials

Classification by susceptibility and permeability
MaterialSusceptibility χ\chiRelative permeability μr\mu_rPermeability μ\mu
Diamagnetic−1≤χ<0-1\leq\chi<00≤μr<10\leq\mu_r<1μ<μ0\mu<\mu_0
Paramagnetic0<χ<ε0<\chi<\varepsilon (small positive)1<μr<1+ε1<\mu_r<1+\varepsilonμ>μ0\mu>\mu_0
Ferromagneticχ≫1\chi\gg1 (large positive)μr≫1\mu_r\gg1μ≫μ0\mu\gg\mu_0
  • Diamagnetic response: χ\chi is negative, so MM and HH point in opposite directions.
  • Paramagnetic response: χ\chi is positive but small; MM is along HH.
  • Ferromagnetic response: χ\chi is large and positive.

Define magnetic intensity and state its relation to BB and MM.

Answer: Magnetic intensity HH separates the externally produced field contribution from material magnetisation. H=Bμ0−MH=\frac{B}{\mu_0}-M, or equivalently B=μ0(H+M)B=\mu_0(H+M).

Quick recap

  • Magnetisation is net magnetic moment per unit volume: M=mnetVM=\frac{m_{\text{net}}}{V}.
  • A magnetic core adds field Bm=μ0MB_m=\mu_0M to the solenoid field.
  • Magnetic intensity is H=Bμ0−MH=\frac{B}{\mu_0}-M; for a solenoid, H=nIH=nI.
  • Susceptibility describes response: M=χHM=\chi H; relative permeability is μr=1+χ\mu_r=1+\chi.
  • The material field relation is B=μ0(H+M)=μHB=\mu_0(H+M)=\mu H.
  • Diamagnetic materials have negative χ\chi, paramagnetic materials small positive χ\chi, and ferromagnetic materials large positive χ\chi.
Lecture 5

Diamagnetism

Reference video · Lecture 5Diamagnetism

Diamagnetic Behaviour

Definition

Diamagnetic substance — A substance weakly repelled by an external magnetic field and tending to move from a stronger-field region to a weaker-field region.

Behaviour and Cause

  • Field effect: Field lines are expelled, so the field inside is slightly reduced—typically by about one part in 10510^5.
  • Atomic state: The resultant magnetic moment of an atom is normally zero, although orbiting electrons have orbital magnetic moments.
  • Applied field: By Lenz’s law, changes in electron motion induce a magnetic moment opposite to the applied field.
  • Net result: The opposing moment causes repulsion; in a non-uniform field, a diamagnetic substance moves from high field to low field.

Examples and Superconductors

  • Examples: Bismuth, copper, lead, silicon, nitrogen at STP, water and sodium chloride are diamagnetic.
  • Universality: Diamagnetism occurs in all substances, but is often masked by stronger paramagnetic or ferromagnetic effects.
  • Superconductors: These are metals cooled to very low temperatures; they show perfect conductivity and perfect diamagnetism, completely expelling field lines.
  • Meissner effect: Perfect diamagnetism in a superconductor is called the Meissner effect; its susceptibility is χ=−1\chi=-1 and relative permeability is μr=0\mu_r=0.
  • Repulsion and use: A superconductor and a magnet repel each other; superconducting magnets can be used in magnetically levitated superfast trains.
Magnetic field lines near diamagnetic and paramagnetic substances.
Magnetic field lines near diamagnetic and paramagnetic substances.

Paramagnetism

Definition

Paramagnetic substance — A substance that becomes weakly magnetised in an external field and is weakly attracted towards stronger magnetic fields.

Behaviour and Cause

  • Atomic moments: Atoms, ions or molecules possess permanent magnetic dipole moments.
  • Without a field: Random thermal motion keeps the moments disordered, so there is no net magnetisation.
  • With a field: A sufficiently strong field, especially at low temperature, aligns dipoles along the field; field lines become concentrated inside the material.
  • Motion and field change: A non-uniform field draws the sample towards stronger fields; field enhancement is typically about one part in 10510^5.
  • Saturation: Increasing the field or lowering the temperature increases magnetisation until all dipoles align. Both χ\chi and μr\mu_r depend on the material and sample temperature.

Examples

  • Examples: Aluminium, sodium, calcium, oxygen at STP and copper chloride.

Ferromagnetism

Definition

Ferromagnetic substance — A substance that becomes strongly magnetised in an external field and is strongly attracted towards stronger magnetic fields.

Domains and Magnetisation

  • Domains: Interactions make atomic dipole moments align spontaneously over macroscopic regions called domains; each domain has net magnetisation.
  • Domain scale: A typical domain is about 1 mm1\,\text{mm} in size and contains roughly 101110^{11} atoms.
  • Unmagnetised state: Domains point in different directions, so their magnetisations cancel and there is no bulk magnetisation.
  • Applied field: Domains turn towards the field, while those already aligned grow; the material becomes strongly magnetised and concentrates field lines.
  • Motion and mechanism: In a non-uniform field, a ferromagnetic sample moves towards stronger fields. The cooperative domain effect requires quantum mechanics for its full explanation.
Ferromagnetic domains are initially random, then align and grow in an applied field.
Ferromagnetic domains are initially random, then align and grow in an applied field.
Hard and Soft Ferromagnets
TypeAfter external field is removedExamples and use
Hard ferromagnetsMagnetisation persists.Alnico (iron, aluminium, nickel, cobalt and copper) and natural lodestone; used to make permanent magnets such as compass needles.
Soft ferromagnetsMagnetisation disappears.Soft iron.

Examples and Temperature Effect

  • Ferromagnetic elements: Iron, cobalt, nickel and gadolinium are examples; relative permeability is greater than 10001000.
  • Temperature: At sufficiently high temperature, a ferromagnet becomes paramagnetic as its domain structure breaks down; magnetisation disappears gradually.
Diamagnetic vs Paramagnetic vs Ferromagnetic
PropertyDiamagneticParamagneticFerromagnetic
Atomic dipolesResultant atomic moment is zero.Permanent moments; random without a field.Permanent moments interact and form aligned domains.
Response to fieldInduced moment opposes the field; weak repulsion.Dipoles align with the field; weak attraction.Domains align and grow; strong attraction.
Non-uniform fieldMoves towards weaker field.Moves towards stronger field.Moves towards stronger field.
Field insideSlightly reduced.Slightly enhanced.Highly concentrated.

What causes diamagnetic repulsion?

Answer: An applied field induces a magnetic moment opposite to itself, in accordance with Lenz’s law. This opposing moment causes repulsion.

How does an applied field magnetise a ferromagnet?

Answer: Domains turn towards the applied field, while domains already aligned with it grow. Their combined magnetisation becomes strong.

What are hard and soft ferromagnets?

Answer: Hard ferromagnets retain magnetisation after the field is removed; soft ferromagnets lose it. Alnico is hard, while soft iron is soft.

Quick recap

  • Diamagnets develop a moment opposite to the applied field and move towards weaker fields.
  • Superconducting metals cooled to very low temperatures show perfect diamagnetism; complete field expulsion is the Meissner effect, with χ=−1\chi=-1 and μr=0\mu_r=0.
  • Paramagnets have permanent atomic dipoles that align weakly with an applied field.
  • Ferromagnets have interacting dipoles grouped into domains; domains align and grow in a field.
  • Hard ferromagnets retain magnetisation; soft ferromagnets lose it when the field is removed.
  • Heating a ferromagnet sufficiently can break down its domains and make it paramagnetic.
Lecture 6

Summary

Reference video · Lecture 6Summary

Magnetic Poles and Dipole Behaviour

  • Magnetic poles: Like poles repel and unlike poles attract; isolated north or south poles do not exist.
  • Magnetic dipole: Every magnet has a north and south pole, and breaking it produces smaller magnets with both poles.

A Magnetic Dipole in a Uniform Field

Torque on a magnetic dipole
τ=m×B\boldsymbol{\tau}=\boldsymbol{m}\times\boldsymbol{B}

The torque is the vector product of dipole moment and field.

Potential energy of a magnetic dipole
U=−m⋅BU=-\boldsymbol{m}\cdot\boldsymbol{B}

The energy is minimum when the dipole is aligned with the field.

Magnetic Field of a Bar Magnet

Far-field of a bar magnet
Baxial=μ0m2πr3,Bequatorial=−μ0m4πr3B_{\text{axial}}=\frac{\mu_0 m}{2\pi r^3},\qquad B_{\text{equatorial}}=-\frac{\mu_0 m}{4\pi r^3}

Here r≫lr\gg l; the equatorial expression includes its direction relative to the dipole moment.

Gauss’s Law for Magnetism

Net magnetic flux through a closed surface
∮B⋅dS=0\oint \boldsymbol{B}\cdot d\boldsymbol{S}=0

The flux contributions through all surface elements add to zero.

Magnetic and electrostatic field lines
PointMagnetic field linesElectrostatic field lines
PatternContinuous closed loopsBegin on positive charges and terminate on negative charges, or extend to infinity
SourceNo isolated magnetic monopolesIsolated positive and negative electric charges exist

Magnetic Properties of Materials

Magnetic intensity and field in a material
H=B0μ0,B=μ0(H+M)\boldsymbol{H}=\frac{\boldsymbol{B}_0}{\mu_0},\qquad \boldsymbol{B}=\mu_0(\boldsymbol{H}+\boldsymbol{M})

Here oldsymbol{B}_0 is the applied magnetic field and oldsymbol{B} is the field in the material.

Definition

Magnetic susceptibility — Magnetic susceptibility \chi measures how strongly a material becomes magnetised in response to \boldsymbol{H}.

Linear magnetic material
M=χH,B=μH,μ=μ0μr,μr=1+χ\boldsymbol{M}=\chi\boldsymbol{H},\qquad \boldsymbol{B}=\mu\boldsymbol{H},\qquad \mu=\mu_0\mu_r,\qquad \mu_r=1+\chi

For a linear material, magnetisation is proportional to magnetic intensity.

Magnetic quantities: symbols, units and dimensions
QuantitySymbolNatureDimensionsSI unit / note
Permeability of free spaceμ0\mu_0Scalar[MLT−2A−2][M L T^{-2} A^{-2}]T m A−1\mathrm{T\,m\,A^{-1}}; μ0/4π=10−7\mu_0/4\pi=10^{-7}
Magnetic field / induction / flux densityB\boldsymbol{B}Vector[MT−2A−1][M T^{-2} A^{-1}]Tesla (T\mathrm{T}); 104 G=1 T10^4\,\mathrm{G}=1\,\mathrm{T}
Magnetic momentm\boldsymbol{m}Vector[L2A][L^2 A]A m2\mathrm{A\,m^2}
Magnetic fluxΦB\Phi_BScalar[ML2T−2A−1][M L^2 T^{-2} A^{-1}]Weber (Wb\mathrm{Wb}); 1 Wb=1 T m21\,\mathrm{Wb}=1\,\mathrm{T\,m^2}
MagnetisationM\boldsymbol{M}Vector[L−1A][L^{-1} A]A m−1\mathrm{A\,m^{-1}}; magnetic moment per unit volume
Magnetic intensity / field strengthH\boldsymbol{H}Vector[L−1A][L^{-1} A]A m−1\mathrm{A\,m^{-1}}
Magnetic susceptibilityχ\chiScalarDimensionlessM=χH\boldsymbol{M}=\chi\boldsymbol{H}
Relative permeabilityμr\mu_rScalarDimensionlessB=μ0μrH\boldsymbol{B}=\mu_0\mu_r\boldsymbol{H}
Magnetic permeabilityμ\muScalar[MLT−2A−2][M L T^{-2} A^{-2}]T m A−1\mathrm{T\,m\,A^{-1}} or N A−2\mathrm{N\,A^{-2}}

Magnetic Susceptibility and Permanent Magnets

Diamagnetic and paramagnetic materials
PointDiamagneticParamagnetic
SusceptibilitySmall and negative; approximately −10−5-10^{-5}Small and positive; approximately +10−5+10^{-5}
Response to fieldWeakly opposed to the applied fieldWeakly aligned with the applied field

Magnetic Monopoles and Quantisation of Charge

State Gauss’s law for magnetism and one consequence.

Answer: The net magnetic flux through any closed surface is zero: ∮B⋅dS=0\oint\boldsymbol{B}\cdot d\boldsymbol{S}=0. Therefore, magnetic field lines form closed loops and isolated magnetic poles do not occur.

Write the torque and potential energy of a magnetic dipole in a uniform magnetic field.

Answer: τ=m×B\boldsymbol{\tau}=\boldsymbol{m}\times\boldsymbol{B} and U=−m⋅BU=-\boldsymbol{m}\cdot\boldsymbol{B}; the net force is zero.

Quick recap

  • Magnetic poles occur in pairs; cutting a magnet produces smaller magnets, not isolated poles.
  • In a uniform field, a magnetic dipole experiences zero net force, torque m×B\boldsymbol{m}\times\boldsymbol{B} and energy −m⋅B-\boldsymbol{m}\cdot\boldsymbol{B}.
  • For r≫lr\gg l, the axial and equatorial dipole fields vary as r−3r^{-3}.
  • The net magnetic flux through a closed surface is zero, so magnetic field lines form closed loops.
  • For linear materials, M=χH\boldsymbol{M}=\chi\boldsymbol{H} and μr=1+χ\mu_r=1+\chi.
  • Diamagnetic susceptibility is negative; paramagnetic susceptibility is positive. Persistent ferromagnets are permanent magnets.

Physics — ALL CHAPTERS

1

Electric Charges And Fields

View

2

Electrostatic Potential And Capacitance

View

3

Current Electricity

View

4

Moving Charges And Magnetism

View

5

Magnetism And Matter

View

6

Electromagnetic Induction

View

7

Alternating Current

View

8

Electromagnetic Waves

View

1

Ray Optics And Optical Instruments

View

2

Wave Optics

View

3

Dual Nature Of Radiation And Matter

View

4

Atoms

View

5

Nuclei

View

6

Semiconductor Electronics: Materials, Devices And Simple Circuits

View