Continuity of Absolute-Value and Polynomial Functions — order maybe source example sequence actually abs, polynomial, reciprocal; heading title should not group incorrectly.
Definition
Continuity at a point — A function f is continuous at c when its limit at c exists as a real number and equals f(c).
Continuity Criterion
x→climf(x)=f(c)
The two-sided limit must exist and equal the function value.
Familiar Continuous Functions
Absolute value:f(x)=∣x∣ is continuous at every real number, including x=0; its branches meet at value 0.
Polynomial:f(x)=x3+x2−1 is continuous at every real number because substitution into the limit gives f(c).
Absolute-Value Definition
∣x∣={−x,x,x<0x≥0
Use the relevant branch on either side of zero; f(0)=0.
Reciprocal Function and Infinite Behaviour
Continuity of the reciprocal function
For every c=0, limx→cx1=c1=f(c); hence f(x)=x1 is continuous throughout its domain.
Behaviour Near Zero
From the right: As x→0+, x1 grows without bound, written limx→0+x1=+∞.
From the left: As x→0−, x1 decreases without bound, written limx→0−x1=−∞.
Real-limit meaning:+∞ and −∞ are not real numbers, so neither one-sided limit exists as a real-number limit; the two-sided real limit at 0 does not exist either.
Domain:f(x)=x1 is undefined at x=0, so continuity is tested only for x=0.
The reciprocal graph has branches in the first and third quadrants and is unbounded near x=0.
Piecewise Functions and Boundary Points
Definition
One-sided limits — The left-hand and right-hand limits describe the values approached from x<c and x>c, respectively.
Continuity at a Piecewise Boundary
x→c−limf(x)=x→c+limf(x)=f(c)
Continuity at c requires both one-sided limits to agree with each other and with f(c).
Test a Piecewise Boundary
Identify where the rule changes and find the assigned function value there, if one exists.
x=c
Use the left-hand rule to calculate the left-hand limit.
x→c−limf(x)
Use the right-hand rule to calculate the right-hand limit.
x→c+limf(x)
Compare the limits with each other and with the function value.
x→c−limf(x)=x→c+limf(x)=f(c)
Worked example
Discuss continuity of the piecewise function at x=0.
Consider f(x)=x2 for x<0, f(0)=0, and f(x)=x for x>0. Away from zero, each branch is continuous.
f(x)=⎩⎨⎧x2,0,x,x<0x=0x>0
Evaluate the left-hand limit using the quadratic branch.
x→0−limf(x)=x→0−limx2=0
Evaluate the right-hand limit using the linear branch.
x→0+limf(x)=x→0+limx=0
Both limits equal the value at zero, so the function is continuous there.
x→0limf(x)=0=f(0)
Answer: The function is continuous at x=0 and, since each branch is continuous away from zero, throughout its domain.
Boundary-Point Examples
Jump at x=1: For f(x)=x+2 when x<1 and f(x)=x−2 when x>1, the one-sided limits are 3 and −1; they differ, so the function is discontinuous at 1.
Assigned boundary value: Giving the same rules with f(1)=0 does not remove the discontinuity, because the one-sided limits still differ.
Continuous on its domain: If f(x)=x+2 for x<0 and f(x)=−x+2 for x>0, it is undefined at 0 but continuous at every point in its domain, R∖{0}.
A matched join: For f(x)=x2 when x<0, f(0)=0, and f(x)=x when x>0, both one-sided limits at zero equal the function value.
An inverted V-shaped graph with an open circle at the excluded point on the vertical axis.
⚠ Common mistake
Do not infer continuity merely because a function is assigned a value at a boundary. Unequal one-sided limits guarantee discontinuity, whatever the assigned value.
Continuity of Polynomial Functions
Definition
Polynomial function — A polynomial function has the form p(x)=a0+a1x+⋯+anxn, where ai∈R and an=0.
Continuity of polynomials
Every polynomial is defined and continuous for all real numbers; for any real c, its limit is found by substituting c.
Polynomial Limit
x→clim(a0+a1x+⋯+anxn)=a0+a1c+⋯+ancn
Substitute c for x to evaluate the limit.
Example
For f(x)=x3+x2−1, limx→cf(x)=c3+c2−1=f(c) for every real c; hence it is continuous everywhere.
Greatest Integer Function
Definition
Greatest integer function — The greatest integer function f(x)=[x] gives the greatest integer less than or equal to x.
Continuity of the Greatest Integer Function
At non-integers: The function is constant in a neighbourhood of each non-integer, so it is continuous there.
At an integer c: Values just below c approach c−1, while values just above c approach c.
Conclusion: The one-sided limits differ at each integer; the function is discontinuous at every integer and continuous at every non-integer.
One-Sided Limits at an Integer
x→c−lim[x]=c−1,x→c+lim[x]=c
For any integer c, these limits are unequal.
Step graph of the greatest integer function, showing jumps at integers.
Practice
Find the points where f(x)=x1 is discontinuous.
Hint: First identify its domain and recall that continuity is tested only at domain points.
Key step: For every c=0, limx→cx1=c1=f(c).
Solution: It is continuous for every x=0. It is undefined at x=0, where its one-sided limits do not exist as real-number limits.
Practice
Find the discontinuities of f(x)=x+2 for x<1, f(1)=0, and f(x)=x−2 for x>1.
Hint: Compare the one-sided limits at the only boundary, x=1.
Key step: The left limit is 1+2=3 and the right limit is 1−2=−1.
Solution: Since 3=−1, f is discontinuous at x=1; it is continuous at all other real numbers.
Practice
Find all points of discontinuity of f(x)=[x].
Hint: At an arbitrary integer c, evaluate the limits from the left and right.
Key step:limx→c−[x]=c−1 and limx→c+[x]=c.
Solution: The function is discontinuous at every integer and continuous at every non-integer.
Quick recap
Continuity at c requires a real two-sided limit and limx→cf(x)=f(c).
∣x∣ is continuous everywhere; polynomials are continuous on all of R.
1/x is continuous for x=0; its one-sided limits at 0 do not exist as real-number limits.
At a piecewise boundary, compare both one-sided limits and the assigned function value.
A function may be continuous at every point of its domain even if it is undefined elsewhere.
The greatest integer function is continuous at non-integers and discontinuous at every integer.
Algebra of continuous functions — If f and g are continuous at c, their sum, difference and product are continuous at c; their quotient is continuous there when g(c)=0.
Algebra laws for continuity
If f and g are continuous at c, then f+g, f−g and fg are continuous at c. Also, gf is continuous at c provided g(c)=0.
Constant multiples and reciprocals
For a real constant λ, λg is continuous wherever g is continuous. If g(c)=0, then g1 is continuous at c.
Identify the functions being combined and the point under consideration.
Check that each component function is continuous at that point.
For a quotient, verify that the denominator is nonzero at the point.
g(c)=0
Apply the relevant algebra law to conclude continuity.
Worked example
Prove that F(x)=x−1x2+1 is continuous at x=2.
Show that the function is continuous at x=2.
F(x)=x−1x2+1
The numerator and denominator are polynomials, so both are continuous; the denominator is nonzero at 2.
2−1=1=0
The quotient law applies, and its value at the point is:
F(2)=2−122+1=5
Answer:F is continuous at x=2 because it is a quotient of continuous polynomials with nonzero denominator there.
Rational and Trigonometric Functions
Definition
Rational function — A rational function has the form f(x)=q(x)p(x), where p and q are polynomials and q(x)=0 on its domain.
Continuity of rational functions
Polynomials are continuous everywhere. Therefore, every rational function is continuous at every point in its domain, since its denominator is nonzero at each such point.
Continuity of sine and cosine
The sine and cosine functions are continuous for every real number. Their continuity follows from the limits at 0 and the angle-addition identities.
Use this limit to define the derivative at a point or the derivative function.
Rules of Differentiation
(u±v)′=u′±v′,(uv)′=u′v+uv′,(vu)′=v2u′v−uv′
For differentiable functions u and v, the quotient rule applies where v=0.
Standard Derivatives
f(x)
f′(x)
xm
mxm−1
sinx
cosx
cosx
−sinx
tanx
sec2x
Differentiability and Continuity
Differentiability implies continuity
If f is differentiable at c, then f is continuous at c. Since f(x)−f(c)=x−cf(x)−f(c)(x−c) for x=c, taking the limit gives f′(c)⋅0=0, so limx→cf(x)=f(c).
x→climf(x)=f(c)
★ Remember
One-way implication: Differentiability guarantees continuity, but continuity does not guarantee differentiability.
Counterexample:f(x)=∣x∣ is continuous at 0, but its left and right derivatives there are −1 and 1; hence it is not differentiable at 0.
Derivatives of Composite Functions
Chain Rule
dxdf=dtdv⋅dxdt
For f(x)=v(u(x)), use the chain rule to differentiate the composition.
Differentiate a Composite Function
Identify the inner function and set it equal to t.
t=u(x)
Differentiate the outer function with respect to t.
dtdv
Differentiate t with respect to x and multiply the derivatives.
dxdf=dtdv⋅dxdt
Rewrite the final result in terms of x.
Worked example
Find the derivative of f(x)=sin(x2).
Differentiate f(x)=sin(x2) using the chain rule.
f(x)=sin(x2)
Set the inner function equal to t.
t=x2,f=sint
Differentiate the outer and inner functions.
dtdf=cost,dxdt=2x
Multiply and substitute t=x2.
dxdf=cost⋅2x=2xcos(x2)
Answer:f′(x)=2xcos(x2)
Practice
Differentiate y=(2x+1)5.
Hint: Treat 2x+1 as the inner function.
Key step: Apply the chain rule: multiply the outer derivative by the derivative of 2x+1.
Solution:dxdy=5(2x+1)4⋅2=10(2x+1)4
Practice
Differentiate y=xsinx.
Hint: Use the product rule with u=x and v=sinx.
Key step: Use y′=u′v+uv′.
Solution:dxdy=1⋅sinx+xcosx=sinx+xcosx
Quick recap
The derivative is the limit of the difference quotient, when that limit exists.
Use the sum, product and quotient rules, along with standard derivatives.
Differentiability requires equal, finite left- and right-hand derivative limits.
Differentiability implies continuity, but continuity does not imply differentiability.
∣x∣ is continuous but not differentiable at 0 because its one-sided derivatives differ.
The chain rule differentiates a composite by multiplying outer and inner derivatives.
Implicit function — A relation defines y implicitly as a function of x when it relates x and y without expressing y directly as y=f(x).
Explicit vs Implicit Form
Form
Description
Example
Explicit
y is directly written as a function of x.
x−y+π=0 rearranges to y=x+π.
Implicit
The relation may not be easy to solve directly for y.
x+sin(xy)−y=0.
Key Rules
Differentiate: Differentiate both sides with respect to x, treating y as a function of x.
Chain rule: Differentiating a term involving y introduces dxdy; for example, dxd(siny)=cosydxdy.
Useful Differentiation Rules
dxd(y)=dxdy,dxd(siny)=cosydxdy
Use these rules when differentiating an implicit relation.
Differentiate an Implicit Relation
Differentiate both sides with respect to x, applying the chain rule to terms involving y.
Collect all terms containing dxdy on one side.
Solve for dxdy and check whether the resulting denominator can be zero.
Worked example
Find dxdy for (a) x−y=π and (b) y+siny=cosx.
For x−y=π, differentiate both sides with respect to x.
1−dxdy=0
Solve for the derivative.
dxdy=1
For y+siny=cosx, differentiate implicitly using the chain rule.
dxdy+cosydxdy=−sinx
Factor out dxdy and solve.
dxdy(1+cosy)=−sinx,dxdy=−1+cosysinx
Answer: (a) dxdy=1. (b) dxdy=−1+cosysinx, where y=(2n+1)π for an integer n.
⚠ Common mistake
Do not treat y as a constant: because y depends on x, differentiating siny gives cosydxdy, not just cosy.
Derivatives of Inverse Trigonometric Functions
Definition
Inverse trigonometric functions — These functions give the angle whose trigonometric ratio equals the input; their derivatives can be found using implicit differentiation and the chain rule.
Exponential function — A function of the form f(x)=bx, where b>1, is an exponential function.
Growth and graph
Polynomial growth: For x>1, increasing the degree of xn increases its growth; for example, x15 grows faster than x10 over the same increase from x=1 to x=2.
Exponential growth: For any fixed positive integer n, bx with b>1 eventually grows faster than xn.
Domain and range: The domain of bx is R, and its range is R+.
Graph: It passes through (0,1), is increasing, and approaches but never meets the x-axis as x→−∞.
Natural exponential:e=1+1!1+2!1+⋯ with 2<e<3; the function ex is the natural exponential function.
The graph of y=10x compared with power curves, illustrating the faster eventual growth of the exponential function.
Exponential function
f(x)=bx,b>1
For a positive base greater than 1:
Important exponential bases
Common exponential function: The exponential function with base 10 is called the common exponential function.
Natural exponential function: The exponential function with base e is y=ex.
Worked example
Which is larger at x=1000: 10x or x100?
Compare 10x with x100 at x=1000.
Evaluate the exponential function.
101000
Rewrite the polynomial value as a power of 10.
(103)100=10300
Compare the exponents to see that the exponential value is larger.
101000>10300
Answer:10x is larger: 101000>10300.
Logarithmic functions
Definition
Logarithm — For b>1 and a>0, logba is the exponent to which b must be raised to obtain a.
Logarithm as an exponent
logba=x⟺bx=a
Convert between logarithmic and exponential forms using this equivalence.
Logarithm function
Inverse relationship: The logarithmic function with base b reverses the exponential function bx.
Domain and range: The domain is R+ and the range is R; real logarithms are not defined for zero or negative arguments.
Graph: It passes through (1,0), is increasing, and tends to −∞ as x→0+.
Common logarithm: Base 10 gives common logarithms.
Natural logarithm: Base e gives natural logarithms; in this chapter, logx means lnx=logex.
Logarithmic graphs with bases 2, e, and 10 all pass through (1,0).
Inverse identities
Exponential and logarithmic functions with the same base undo one another on their valid domains.
logb(bx)=x,blogbx=x(x>0)
Inverse graphs
The graphs of y=ex and y=lnx are reflections of one another across the line y=x.
Worked example
Evaluate log5625.
Convert log5625=x into exponential form.
5x=625
Express 625 as a power of 5.
625=54
Equate the exponents.
x=4
Answer:log5625=4.
Laws of logarithms
Conditions
Arguments: Each logarithm argument must be positive.
Bases: The logarithm laws here use bases greater than 1.
Product rule
The logarithm of a product is the sum of the logarithms.
logb(pq)=logbp+logbq
Quotient rule
The logarithm of a quotient is the difference of the logarithms.
logb(yx)=logbx−logby
Power rule
The exponent of a positive argument becomes a coefficient.
logb(pn)=nlogbp
Change-of-base rule
Use this identity to express a logarithm using another base.
logap=logbalogbp
Worked example
Evaluate log2(28⋅4) using logarithm laws.
Apply the product and quotient rules.
log2(28⋅4)=log28+log24−log22
Evaluate each logarithm and simplify.
3+2−1=4
Answer:4.
Differentiation of exponential and logarithmic functions
Basic derivative rules
Natural exponential: The derivative of ex is ex.
Natural logarithm: The derivative of lnx is 1/x, for x>0.
Chain rule: For composite functions, differentiate the outer function and multiply by the derivative of the inner function.
Domain: The rule for lnu requires u>0.
Natural exponential and logarithm derivatives
dxdex=ex,dxdlnx=x1(x>0)
The basic derivatives are:
Chain-rule forms
dxdeu=euu′,dxdlnu=uu′
Use these when the exponent or logarithm argument depends on x.
Worked example
Differentiate each function with respect to x: e−x, sin(logx) for x>0, cos−1(ex), and ecosx.
Differentiate y=e−x using the chain rule.
dxdy=e−x(−1)=−e−x
For y=sin(logx) with x>0, differentiate the outer sine and multiply by the derivative of logx.
dxdy=cos(logx)⋅x1=xcos(logx)
For y=cos−1(ex), apply the inverse-cosine rule and chain rule; the real derivative applies when x<0.
dxdy=−1−e2xex
For y=ecosx, multiply the exponential by the derivative of its exponent.
dxdy=ecosx(−sinx)=−ecosxsinx
Answer:−e−x; xcos(logx); −1−e2xex for x<0; and −ecosxsinx.
Practice
Differentiate y=sin(logx), where x>0.
Hint: Use the chain rule and dxdlogx=x1.
Key step:dxdy=cos(logx)⋅x1.
Solution:dxdy=xcos(logx).
Practice
Differentiate y=cos−1(ex) on its real differentiable domain.
Hint: Use dxdcos−1u=−1−u2u′.
Key step: Here u=ex and u′=ex; differentiability requires ex<1, so x<0.
Solution:dxdy=−1−e2xex for x<0.
Practice
For which real values of x is elogx=x valid?
Hint: Check the domain of logx before applying the inverse identity.
Key step:logx is defined only when x>0.
Solution: It is valid exactly for x>0; it is undefined for x≤0.
Quick recap
For b>1, bx has domain R, positive range, and passes through (0,1).
For fixed positive integer degree, exponential growth eventually exceeds polynomial growth; polynomial growth also increases with degree for x>1.
The base-10 exponential is called the common exponential function; ex is the natural exponential function.
logba=x exactly when bx=a; logarithms require positive arguments.
Product, quotient, power, and change-of-base rules simplify logarithmic expressions.
The key derivatives are dxdex=ex and dxdlnx=x1; use the chain rule for composites.
Logarithmic differentiation — A method of differentiating a function by taking its logarithm first, especially useful when the variable appears in the base, the exponent, or both.
Logarithmic differentiation rule
For y=[u(x)]v(x), take natural logarithms and differentiate implicitly. This method requires u(x)>0 and y>0 on the domain considered.
y′=uv(v′lnu+vuu′)
Key logarithm rules used
Power rule:ln(uv)=vlnu.
Product rule for logs:ln(ab)=lna+lnb.
Quotient rule for logs:ln(a/b)=lna−lnb.
Steps for logarithmic differentiation
Set the given function equal to y.
y=f(x)
Take natural logarithms and simplify using logarithm rules.
lny=ln(f(x))
Differentiate both sides with respect to x, using the chain rule on lny.
y1dxdy=dxdln(f(x))
Multiply by y and substitute the original expression for y.
dxdy=ydxdln(f(x))
Worked example
Differentiate y=3x2+4x+5(x−3)(x2+4) with respect to x.
Let the function be y=3x2+4x+5(x−3)(x2+4).
y=(3x2+4x+5(x−3)(x2+4))1/2
Take natural logarithms and expand the logarithm of the product and quotient.
lny=21[ln(x−3)+ln(x2+4)−ln(3x2+4x+5)]
Differentiate both sides with respect to x.
y1dxdy=21[x−31+x2+42x−3x2+4x+56x+4]
Multiply by y and replace it with the original function.
Do not differentiate u(x)v(x) using the ordinary power rule alone; both the base and exponent may vary. Taking logarithms also requires the function and logarithm argument to be positive on the domain used.
Quick recap
Logarithmic differentiation is especially useful for variable bases, variable exponents, and complicated products or quotients.
For y=uv, use yy′=v′lnu+vuu′.
For a>0, dxd(ax)=axlna.
For x>0, dxd(xx)=xx(1+lnx).
For implicit equations with variable powers, differentiate each power logarithmically and then isolate dxdy.
Check positivity conditions before taking logarithms.
Apply the chain rule to the expression inside each radical or logarithm.
Differentiate a radical or logarithm
Identify the inner expression and check where the function is defined.
Differentiate the outer function, then multiply by the derivative of the inner expression.
dxdf(u)=f′(u)u′
Simplify and state any domain restriction.
Worked example
Differentiate 3x+2+2x2+41 and log7(lnx).
Differentiate the function; its domain is x>−32.
y=3x+2+2x2+41
Differentiate each term using the chain rule.
dxdy=23x+23−2(2x2+4)3/24x
For a logarithm with base 7, use the change-of-base rule; the domain is x>1.
dxdlog7(lnx)=ln71⋅lnx1⋅x1
Answer:23x+23−(2x2+4)3/22x; and xln7lnx1.
Inverse-trigonometric compositions
Definition
Principal-value caution — Inverse trigonometric functions return values only in their principal ranges, so identities such as sin−1(sinu)=u need not hold for every real u.
Standard inverse-trigonometric derivatives
For inputs in their domains, dxdsin−1x=1−x21, dxdcos−1x=−1−x21, and dxdtan−1x=1+x21.
Useful compositions and their derivatives
Cosine inverse:cos−1(sinx)=cos−1(cos(2π−x)); the principal-value range means the derivative is not −1 for all real x.
Tangent inverse:1+cosxsinx=tan(2x) when x=(2k+1)π; the derivative of tan−1(1+cosxsinx) is 21 throughout its domain.
Sine inverse:1+4x2x+1≤1 because (2x−1)2≥0; hence the argument lies in the domain of sin−1 for every real x.
Sine-inverse derivative: For x<0, the derivative of sin−1(1+4x2x+1) is 1+4x2ln22x; for x>0, it is the negative of this. It is not differentiable at x=0.
Differentiate an inverse-trigonometric composition
Check the inner expression's range and the inverse function's principal-value range.
Use a trigonometric identity only on intervals where the resulting angle is in the principal range.
Differentiate on those intervals and inspect endpoints or branch changes separately.
Worked example
Find the derivative of f(x)=sin−1(1+4x2x+1) and identify where it is not differentiable.
Set u=2x>0. The argument is 1+u22u, which is at most 1.
1+u22u≤1⟺(u−1)2≥0
For x<0, u<1 and the inverse sine returns 2tan−1u.
f(x)=2tan−1(2x)
For x>0, u>1 and the inverse sine returns π−2tan−1u.
f(x)=π−2tan−1(2x)
Differentiate the two branches; the slopes disagree at x=0, so the derivative there does not exist.
f′(x)={1+4x2ln22x,−1+4x2ln22x,x<0,x>0
Answer: The piecewise derivative above applies for x=0; f is not differentiable at x=0.
⚠ Common mistake
Do not cancel an inverse trigonometric function with a trigonometric function without checking the principal range; for example, sin−1(sinu) is not always u.
Logarithmic differentiation
Definition
Logarithmic differentiation — Take logarithms of both sides before differentiating, especially for a variable base raised to a variable power.
Variable power rule
If y=[u(x)]v(x) with u(x)>0, then y′=y(v′lnu+vuu′).
Logarithmic differentiation formula
lny=vlnu,y′=[u(x)]v(x)(v′lnu+vuu′)
Use when both the base and exponent depend on x; the function and its base must be positive.
Logarithmically differentiate
Write y as the given variable-power function and take natural logarithms.
lny=v(x)lnu(x)
Differentiate implicitly using the product rule.
yy′=v′lnu+vuu′
Multiply by y and substitute the original expression for y.
y′=y(v′lnu+vuu′)
Worked example
Differentiate y=(sinx)sinx for 0<x<π.
Take the logarithm; sinx>0 on the stated interval.
y=(sinx)sinx,lny=sinxln(sinx)
Differentiate the right-hand side using the product rule.
yy′=cosxln(sinx)+sinxsinxcosx
Multiply by y and simplify.
y′=(sinx)sinx(1+ln(sinx))cosx
Answer:(sinx)sinx(1+ln(sinx))cosx.
Parametric differentiation
Definition
Parametric derivative — When x and y are both functions of a parameter t, the derivative of y with respect to x is the ratio dx/dtdy/dt wherever dx/dt=0.
Parametric derivative formula
dxdy=dtdxdtdy,dtdx=0
Differentiate each parametric expression with respect to t, then divide.
Differentiate parametrically
Find dy/dt and dx/dt separately.
Divide dy/dt by dx/dt and state where the denominator is nonzero.
dxdy=dx/dtdy/dt
Simplify the result only on the allowed parameter values.
Worked example
For a>0, if y=at+1/t and x=(t+1/t)a, find dy/dx.
Differentiate both expressions with respect to t.
dtdy=at+1/tlna(1−t21),dtdx=a(t+t1)a−1(1−t21)
The denominator is nonzero for t=0,±1; divide and cancel the common factor.
dxdy=a(t+t1)a−1at+1/tlna
Answer:a(t+1/t)a−1at+1/tlna, for t=0,±1.
Derivative of one function with respect to another
Definition
Derivative with respect to another function — If u=u(x) and v=v(x), then dvdu=dv/dxdu/dx wherever dv/dx=0.
Derivative with respect to a parameterized function
dvdu=dxdvdxdu,dxdv=0
Treat x as the common parameter and divide the two derivatives.
Worked example
If u=sin2x and v=ecosx, find du/dv.
Differentiate each function with respect to x.
dxdu=2sinxcosx,dxdv=−ecosxsinx
Divide the derivatives; this ratio is defined when sinx=0.
dvdu=−ecosxsinx2sinxcosx=−ecosx2cosx
Answer:−ecosx2cosx, where sinx=0.
Continuity and differentiability: key results
Definition
Continuity at a point — A function f is continuous at x=a if limx→af(x)=f(a); it is continuous on its domain if this holds at every point of that domain.
Continuity rules
Sums, differences, and products of continuous functions are continuous. Their quotient is continuous wherever the denominator is nonzero.
Differentiability implies continuity
Every differentiable function is continuous at that point; the converse is not generally true.
Chain rule
dxdf=dtdvdxdt
For f=v∘u, with t=u(x), differentiate the outer function with respect to t and multiply by dt/dx.
Standard derivatives
In their appropriate domains, dxdex=ex and dxdlnx=x1, together with the inverse-trigonometric derivatives listed above.
Practice
Differentiate log5(ln(2x)).
Hint: Use the chain rule and dxdlogau=ulnau′.
Key step:dxdln(2x)=x1.
Solution:xln5ln(2x)1, for x>21.
Practice
Find the derivative of cos−1(sinx) at x=0.
Hint: Near x=0, 2π−x is in the principal range of cos−1.
Key step:cos−1(sinx)=2π−x near x=0.
Solution: The derivative at x=0 is −1.
Practice
If y=3x+1/x and x=t+1/t is not assumed, instead find dy/dt directly for y=3t+1/t.
Hint: Use logarithmic differentiation.
Key step:lny=(t+1/t)ln3.
Solution:dtdy=3t+1/tln3(1−t21), for t=0.
Quick recap
Use the chain rule for radicals, logarithms, and nested functions.
Logarithmic differentiation handles variable bases raised to variable exponents.
Inverse-trigonometric compositions must respect principal-value ranges.
For parametric functions, dxdy=dx/dtdy/dt when dx/dt=0.
For functions u(x) and v(x), dvdu=dv/dxdu/dx when dv/dx=0.
Continuous functions remain continuous under sums, differences, products, and quotients with nonzero denominator.
Differentiability implies continuity, but continuity alone does not guarantee differentiability.