Inverse function — For a bijection f:X→Y, its inverse f−1:Y→X reverses the mapping: if f(x)=y, then f−1(y)=x.
Inverse-function properties
An inverse exists only when the function is both one-to-one and onto. The domain of f−1 is the range of f, and its range is the domain of f. The inverse is also bijective.
(f−1∘f)(x)=x,(f∘f−1)(y)=y,(f−1)−1=f
Check an inverse relationship
Check that the function is one-to-one and onto on the stated domain and range.
Reverse the input-output mapping to define the inverse.
f(x)=y⟹f−1(y)=x
Verify both compositions return their inputs.
(f−1∘f)(x)=x,(f∘f−1)(y)=y
Worked example
Find the inverse of f(x)=2x+3.
Find the inverse of the bijection f(x)=2x+3 from R to R.
Write the output as y and solve for the input.
y=2x+3⟹x=2y−3
Swap the variable names to express the inverse.
f−1(x)=2x−3
Check by composition.
f−1(f(x))=22x+3−3=x
Answer:f−1(x)=2x−3.
⚠ Common mistake
A trigonometric function does not have an inverse on its full natural domain if it is not one-to-one. Restrict its domain first so that it becomes bijective.
Domains and Ranges of Trigonometric Functions
Natural domains and ranges
Function
Domain
Range
sinx
R
[−1,1]
cosx
R
[−1,1]
tanx
R∖{2(2n+1)π:n∈Z}
R
cotx
R∖{nπ:n∈Z}
R
secx
R∖{2(2n+1)π:n∈Z}
R∖(−1,1)
cosecx
R∖{nπ:n∈Z}
R∖(−1,1)
Why restrictions are needed
Problem: The trigonometric functions repeat values over their natural domains, so most are not one-to-one there.
Solution: Restrict the domain to a suitable interval where the function is bijective; its inverse then has that interval as its range.
Inverse trigonometric functions: These are the inverse functions obtained from the suitably restricted trigonometric functions.
Inverse Sine Function
Definition
Principal inverse sine — The principal inverse sine, written sin−1x or arcsinx, is the inverse of sine restricted to [−2π,2π].
Inverse sine domain and range
The restricted sine function is one-to-one and onto from [−2π,2π] to [−1,1]. Other suitable intervals of length π give other inverse-sine branches; the branch shown here is the principal-value branch.
sin−1:[−1,1]→[−2π,2π]
Inverse sine identities
sin(sin−1x)=x(−1≤x≤1),sin−1(sinx)=x(−2π≤x≤2π)
The first identity holds for inputs in the inverse sine domain; the second holds when the angle is in the principal interval.
Evaluate a principal inverse sine
Identify the angle in the principal interval whose sine equals the given input.
siny=x,−2π≤y≤2π
Return that angle as the inverse-sine value.
y=sin−1x
Worked example
Evaluate sin−1(−21).
Evaluate sin−1(−21) using the principal range.
Find the angle in [−2π,2π] whose sine is −21.
sin(−6π)=−21
The angle lies in the required principal interval.
−6π∈[−2π,2π]
Answer:−6π.
The graphs of y=sinx and y=sin−1x are reflections across y=x; the principal branch uses the restricted sine interval.
Inverse Cosine Function
Definition
Principal inverse cosine — The principal inverse cosine, written cos−1x or arccosx, is the inverse of cosine restricted to [0,π].
Inverse cosine domain and range
Cosine restricted to [0,π] is one-to-one and onto [−1,1]. Other intervals such as [−π,0] or [π,2π] give other branches; [0,π] gives the principal-value branch.
cos−1:[−1,1]→[0,π]
Inverse cosine identities
cos(cos−1x)=x(−1≤x≤1),cos−1(cosx)=x(0≤x≤π)
The first identity holds for inputs in the inverse cosine domain; the second holds for angles in the principal interval.
Evaluate a principal inverse cosine
Identify the angle in [0,π] whose cosine equals the given input.
cosy=x,0≤y≤π
Return that angle as the inverse-cosine value.
y=cos−1x
Worked example
Evaluate cos−1(−21).
Evaluate cos−1(−21) in the principal range.
Find the angle in [0,π] whose cosine is −21.
cos(32π)=−21
The angle is in the principal interval.
32π∈[0,π]
Answer:32π.
The inverse cosine graph is obtained by reflecting the restricted cosine graph across y=x.
Inverse Cosecant: Domain and Restricted Branch
Definition
Cosecant function — Cosecant is the reciprocal of sine, so it is undefined at integer multiples of π and never takes values strictly between −1 and 1.
Branches: Restricting a trigonometric function’s domain to an interval where it is one-to-one defines an inverse branch.
Principal branch: The standard range chosen for each inverse trigonometric function determines its principal value.
Inverse Cosecant
Principal branch of inverse cosecant
The domain is R∖(−1,1) and the principal range is [−2π,2π]∖{0}.
cosec−1:R∖(−1,1)→[−2π,2π]∖{0}
Evaluate an Inverse Cosecant
Set the inverse value equal to y and write the equivalent cosecant equation.
cosecy=x
Choose the angle in the principal range.
y∈[−2π,2π]∖{0}
Worked example
Find the principal value of cosec−1(2).
Find the principal value of cosec−1(2).
Let cosec−1(2)=y; then use the reciprocal relation.
siny=21
The angle in the principal range with this sine is 6π.
y=6π
Answer:6π
Graphs of y=cosecx and the restricted inverse function y=cosec−1x.
Inverse Secant
Principal branch of inverse secant
The domain is R∖(−1,1) and the principal range is [0,π]∖{2π}.
sec−1:R∖(−1,1)→[0,π]∖{2π}
Evaluate an Inverse Secant
Set the inverse value equal to y and use the reciprocal relation.
cosy=x1
Choose the angle in the principal range.
y∈[0,π]∖{2π}
Worked example
Find the principal value of sec−1(−2).
Find the principal value of sec−1(−2).
Let sec−1(−2)=y; the corresponding cosine is:
cosy=−21
The angle in the principal range is 32π.
y=32π
Answer:32π
Graphs of y=secx and the principal branch of y=sec−1x.
Inverse Tangent
Principal branch of inverse tangent
The domain is R and the principal range is (−2π,2π).
tan−1:R→(−2π,2π)
Evaluate an Inverse Tangent
Set the inverse value equal to y and write the tangent equation.
tany=x
Choose the angle in the open principal interval.
y∈(−2π,2π)
Worked example
Find the principal value of tan−1(1).
Find the principal value of tan−1(1).
Solve the equivalent equation in the principal interval.
tany=1,y∈(−2π,2π)
The required angle is:
y=4π
Answer:4π
Graphs of y=tanx and y=tan−1x, showing asymptotes and the principal range.
Inverse Cotangent
Principal branch of inverse cotangent
The domain is R and the principal range is (0,π).
cot−1:R→(0,π)
Evaluate an Inverse Cotangent
Set the inverse value equal to y and write the cotangent equation.
coty=x
Choose the angle in the principal interval.
y∈(0,π)
Worked example
Find the principal value of cot−1(−31).
Find the principal value of cot−1(−31).
Use the cotangent reference angle and select the angle in (0,π).
cot(π−3π)=−cot3π=−31
Therefore, the principal angle is:
y=32π
Answer:32π
⚠ Common mistake
The cotangent example's printed question has a sign mismatch: the worked solution uses −31. For the positive input, cot−1(31)=3π; for the negative input, cot−1(−31)=32π.
Graphs of y=cotx and y=cot−1x, showing branches and asymptotes.
Principal-Branch Domains and Ranges
Domains and Principal Ranges
Inverse function
Domain
Principal range
sin−1x
[−1,1]
[−2π,2π]
cos−1x
[−1,1]
[0,π]
cosec−1x
R∖(−1,1)
[−2π,2π]∖{0}
sec−1x
R∖(−1,1)
[0,π]∖{2π}
tan−1x
R
(−2π,2π)
cot−1x
R
(0,π)
⚠ Common mistake
Do not confuse sin−1x with (sinx)−1. The first is inverse sine; the second means sinx1=cosecx. The same distinction applies to other trigonometric functions.
Worked example
Find the principal value of sin−1(21).
Find the principal value of sin−1(21).
The principal angle must lie in [−2π,2π] and have sine 21.
siny=21
The required angle is:
y=4π
Answer:4π
Practice
Find sec−1(2).
Hint: Solve cosy=21 in [0,π]∖{2π}.
Key step:cos3π=21.
Solution:sec−1(2)=3π.
Practice
Find cot−1(31).
Hint: Use the principal range (0,π).
Key step:cot3π=31.
Solution:cot−1(31)=3π.
Practice
Find sin−1(21).
Hint: Choose the angle in [−2π,2π].
Key step:sin4π=21.
Solution:sin−1(21)=4π.
Quick recap
Principal value: Choose the inverse angle from the principal range.
Inverse cosecant and secant: Their domain is R∖(−1,1); principal ranges exclude 0 and 2π, respectively.
Inverse tangent and cotangent: Their principal ranges are (−2π,2π) and (0,π), respectively.
Other branches: Restrict the original periodic function to another suitable interval to define a different inverse branch.
Notation:sin−1x means inverse sine, not 1/sinx.
Cotangent sign: Check the sign of the input before selecting the angle in (0,π).
Principal values of inverse trigonometric functions
Inverse-function identities
An inverse function reverses the original function when the input lies in the inverse function’s domain; the reverse composition returns the principal value.
sin(sin−1x)=x,x∈[−1,1]sin−1(sinx)=x,x∈[−2π,2π]
Inverse trigonometric identities
sin(sin−1x)=x,x∈[−1,1]sin−1(sinx)=x,x∈[−2π,2π]
Use these identities only with the stated domain or principal-value restriction.
Worked example
Find the value of sin−1(sin53π).
53π is not in the principal-value range [−2π,2π].
53π∈/[−2π,2π]
Use sine symmetry to obtain an angle in the principal range with the same sine.
sin53π=sin(π−53π)=sin52π
Since 52π is in the principal range, the inverse sine returns that angle.
52π∈[−2π,2π]
Answer:52π
⚠ Common mistake
Do not assume sin−1(sinx)=x for every real x; the result must lie in the principal-value range. Also, (sinx)−1=sinx1=cosecx, which is different from sin−1x.
Practice
Evaluate cos−1(cos45π).
Hint: The principal-value range of cos−1x is [0,π].
Key step:cos45π=−22.
Solution:cos−1(cos45π)=cos−1(−22)=43π.
Practice
Evaluate tan−1(tan43π).
Hint: The principal-value range of tan−1x is (−2π,2π); tangent has period π.
Key step:43π−π=−4π lies in the principal range.
Solution:tan−1(tan43π)=−4π.
Quick recap
Principal value: The output of an inverse trigonometric function is restricted to its principal-value range.
Inverse sine range:sin−1x takes values in [−2π,2π].
Composition:sin(sin−1x)=x for x∈[−1,1].
Restricted reverse composition:sin−1(sinx)=x only for x in the principal range.
Angle reduction: Use symmetry or periodicity to bring an angle inside the relevant principal-value range.
Notation:sin−1x is inverse sine, whereas (sinx)−1=sinx1.