Class 8 . Mathematics . Ganita Prakash Part II . Proportional Reasoning 2
Chapter 3: Proportional Reasoning-2
Ch 3
Mathematics
Class 8
Proportionality
Proportional Relationships and Ratios
Proportional relationship — A relationship is proportional when related quantities change by the same factor.
Ratio notation
- Ratio compares quantities in a set order. For example, rice and urad dal in the ratio means 2 cups of rice for every 1 cup of dal.
Checking Whether Two Ratios Are Proportional
Ratios and are proportional when their cross-products are equal. Equal ratios can indicate the same mixture; for the idlis to taste the same, other ingredients must also be proportional and the idlis cooked in the same way.
For ratios and , either condition verifies proportionality.

Test two ratios
- Write the ratios in the same order as the quantities being compared.
- Multiply the first term of the first ratio by the second term of the second ratio.
- Multiply the second term of the first ratio by the first term of the second ratio.
- If the products are equal, the ratios are proportional.
Would the two idli mixtures have the same rice-to-dal proportion?
- Viswanath uses 6 cups of rice and 3 cups of dal; Puneet uses 4 cups of rice and 2 cups of dal. Compare their ratios.
- Calculate the cross-products.
- The cross-products are equal, so the ratios are proportional.
Do not compare only one pair of corresponding terms. Check both cross-products, and keep the quantities in the same order in both ratios.
Are the ratios and proportional?
Are the ratios and proportional?
Quick recap
- Proportional relationship: related quantities change by the same factor.
- Ratio: compares quantities in a fixed order, such as rice to dal.
- Test: and are proportional when .
- Equivalent form: proportional ratios satisfy .
- Example: and are proportional because both cross-products equal .
- Mixtures: other ingredients must also be proportional, and cooking must be the same, for the same taste to be likely.
Ratios in Maps
Representative Fraction (RF)
- Meaning: A Representative Fraction (RF) is the ratio of a distance on a map to the corresponding geographical distance on the ground.
- Same units: The map distance and actual distance must be expressed in the same units when using the RF.
- Example: An RF of 1 : 60,00,000 means 1 cm on the map represents 60,00,000 cm, or 60 km, on the ground.
- Use: Use the map scale to estimate geographical distances between places; these are not road distances.
Quick recap
- RF compares map distance with corresponding geographical ground distance.
- Use the same units for both distances in the scale ratio.
- For RF , each map unit represents ground units.
- Convert the calculated ground distance into a convenient unit such as kilometres.
- Map scales give geographical distance, not road distance.
Ratios with More than 2 Term
Ratios with Multiple Terms
Ratio with multiple terms — A ratio with multiple terms compares three or more quantities in a fixed order.
Key points
- Order matters: Compare each quantity with its corresponding term in the same position.
- Scale together: To keep the same ratio, multiply or divide every term by the same factor.
- Example: The spice mixture ratio is coriander : chillies : toor dal : fenugreek .
- Scale down: Halving every term gives , so the mixture keeps the same proportions.
Two multiple-term ratios are proportional when the ratios of their corresponding terms are equal. For , .
Multiply each term by the same scale factor .
Find quantities from a multiple-term ratio
- Identify the ratio term that matches the known quantity.
- Find the value of one part by dividing the known quantity by its ratio term.
- Multiply each ratio term by the value of one part to find all quantities.
- Add the quantities if the total mixture is required.
Using the ratio, find the red and blue paint amounts and the total volume.
- Paints are mixed in the ratio red : blue : white . If white paint is litres, find the red and blue quantities and the total volume.
- Find the amount represented by one part.
- Calculate the red and blue quantities.
- Add all three quantities to get the total volume.
Do not change only one or some terms of a ratio. To preserve the proportions, scale every term by the same factor.
Cement, sand and gravel are mixed in the ratio . If there are bags of cement, how many bags of sand and gravel are needed, and how much mixture is made in total?
A mix has ingredients in the ratio . Find the equivalent ratio when the second ingredient is units.
Quick recap
- A multiple-term ratio compares three or more quantities in a fixed order.
- Scale every term by the same factor to keep a ratio equivalent.
- Two multiple-term ratios are proportional when corresponding-term quotients are equal.
- Use the known quantity to find the value of one part, then calculate the other quantities.
- Add all component quantities to find the total mixture.
Dividing a Whole in a Given Ratio
Dividing a Quantity in a Ratio
Use this when a quantity is divided into several shares in a given ratio.
Steps for dividing a quantity
- Add the ratio terms to find the total number of parts.
- Divide the whole quantity by the total parts to find one ratio-part.
- Multiply each ratio term by one ratio-part to find its share.
- Check that all shares add up to the original quantity.
How many units of cement, sand and gravel are needed to make 110 units of concrete in the ratio 1:1.5:3?
- A concrete mixture uses cement, sand and gravel in the ratio 1:1.5:3. Find the amounts needed for 110 units.
- Find how many times the ratio mixture is needed.
- Multiply each ratio term by 20 to find the amounts.
Applications
- Paint: For 50 ml of paint in the ratio red:blue:white = 2:3:5, the amounts are 10 ml, 15 ml and 25 ml.
- Triangle angles: The angles in the ratio 1:3:5 are 20°, 60° and 100°, since a triangle’s angles total 180°.
- Coins: For 100 coins in the ratio 10-rupee:5-rupee:2-rupee:1-rupee = 4:3:2:1, the counts are 40, 30, 20 and 10; total value is Rs. 600.
Using Ratios with Triangle Side Lengths
A library has Odiya, Hindi and English books in the ratio 3:2:1. If it has 288 Odiya books, how many Hindi and English books are there?
A 150-minute cricket session is divided among warm-up/cool-down, batting, bowling and fielding in the ratio 3:4:3:5. Find the time for each.
Can side lengths in the ratio 3:4:5 form a triangle, and will every triangle with this ratio be congruent? Can side lengths in the ratio 1:3:5 form a triangle?
Quick recap
- Add the ratio terms to find the total number of parts.
- Divide the whole quantity by the total parts to get one ratio-part.
- Multiply one ratio-part by each term to find the individual shares.
- For a triangle’s angles, divide 180° in the given ratio.
- Triangle side lengths must satisfy the triangle inequality.
- A common ratio of side lengths does not guarantee congruent triangles.
A Slice of the Pie
Pie chart — A pie chart represents parts of a whole as sectors of a circle, with each sector’s angle proportional to its data value.

Finding the sector angles
A full circle has angle . Each category’s sector angle is the same fraction of as that category is of the total data.
Key points
- Ratio: Category counts give the ratio for dividing the circle’s .
- Simplify: Divide every term of the ratio by its HCF; this keeps the proportions unchanged.
- Check: All sector angles must add to .
Use the first formula for counts and the second for percentages.
Find the pie-chart angles for grade counts .
- Write the grade counts as a ratio and simplify by their HCF.
- Add the simplified ratio terms to find the total number of parts.
- Find the angle represented by one part.
- Multiply each ratio term by the angle per part.
- Check that the angles make a complete circle.
Constructing a pie chart
- Find the total and calculate each category’s sector angle.
- Draw a circle and mark a starting radius from its centre.
- Use a protractor to measure the first angle from the starting radius; draw the next radius.
- Measure each following angle from the previous radius, in the same direction, until all sectors are marked.
- Label and, if useful, colour each sector; check the angles total .

Do not use category counts directly as angles. Convert each count into its share of the total, then multiply by .
Out of 360 people, 90 prefer summer, 120 prefer rainy season and the rest prefer winter. Find the pie-chart angles.
Make sector angles for favourite TV channels: Entertainment , Sports , News , Information .
Using class survey data
- Collect: Record how many students choose each subject, with each student choosing only one.
- Convert: Find each subject’s angle using its count divided by the total number of students, then multiplied by .
- Draw: Mark the calculated angles in order and label the subject sectors.
Quick recap
- A pie chart displays categories as sectors of one whole circle.
- The circle’s total angle is .
- Sector angle .
- Simplifying the category ratio can make angle calculations easier.
- Use a protractor to mark sectors consecutively and label them.
- Check that all sector angles add to .
Inverse Proportions
Quick review: direct proportion
Use for a direct proportion when three values are known.
Finding a value by the rule of three
- Write the quantities as a proportion, keeping corresponding values in matching positions.
- Use the rule of three to find the unknown fourth value.
How many workers are needed?
- Five workers move 4,500 bricks in a day. Find the workers needed to move 18,000 bricks in a day.
- Apply the rule of three.
Understanding inverse proportion
| Mode | Speed | Time |
|---|---|---|
| Walk | ||
| Bicycle | ||
| Motorcycle | ||
| Car |
What the speed–time values show
- Same factor, opposite directions: Walking to cycling makes speed times as large and travel time times as small.
- Constant product: Each speed–time pair gives the same distance: .

Inverse proportion — Quantities and vary inversely if their product is a constant, so .
For corresponding inverse-proportion values, the product stays constant: .
For corresponding inverse-proportion values, the ratio of the first quantities equals the reversed ratio of the second quantities.
Checking the ratio property
- Walking and car: Let speed be and time be : , , , and .
- Both ratios: and .
Use when two quantities vary inversely and one corresponding pair of values is known.
Finding an unknown in inverse proportion
- Identify the quantities and confirm that they vary inversely.
- Set the products of the corresponding pairs equal.
- Solve for the unknown and include its unit.
How long is the journey at 60 km/h?
- The journey takes 3 hours at 30 km/h. Find the time at 60 km/h for the same distance.
- Use the constant-product relationship for speed and time.
Do not use a same-direction ratio for inverse quantities: for a fixed journey, speed and time obey .
A journey takes 3 hours at 30 km/h. How long does it take at 60 km/h?
Check the inverse-ratio property for the walking and car values in the table.
Quick recap
- In direct proportion, two quantities change by the same factor in the same direction.
- The rule of three gives for .
- In inverse proportion, quantities change by the same factor in opposite directions.
- Inverse quantities have a constant product: .
- For corresponding values, and .
- For a fixed journey, speed multiplied by time equals distance; the table's product is .
Inverse Proportions – Questions
Recognising Inverse Proportion
- Inverse relationship: Two quantities are inversely proportional when one increases while the other decreases by the corresponding factor.
- Test: For inversely proportional quantities, the product of corresponding values remains constant.
Completing an Inverse-Proportion Table
- Constant product: For an inverse-proportion table, multiply each pair of corresponding values; the products should be equal.
- Find a missing value: Set its product equal to the known constant product and solve.
Workers and Time
- Fixed work: When the amount of work is fixed, more workers generally mean fewer days to complete it.
- Calculation: Assuming workers work at the same rate, workers × days remains constant.
Pumps and Filling Time
- More pumps: Adding identical pumps reduces the time needed to fill the same tank.
- Calculation: Assuming each pump works at the same rate, pumps × filling time remains constant.
Students and Food Supply
- Fixed supply: With the same amount of food, more students mean the supply lasts fewer days.
- Calculation: Assuming each student uses the same amount daily, students × days remains constant.
Combined Work Rates
- Combined rate: When people work together, add their individual work rates to find the amount completed per unit of time.
- Time taken: Divide the total work by the combined rate; for example, rates of 1 and 2/3 units per hour complete 1 unit in 3/5 hour.
Distinguishing Direct and Inverse Relationships

A sector's fraction of the total equals its angle divided by the full-circle angle.
If pencils cost Rs. , find the cost of such pencils. Also, how long does one pump take to fill five equal tanks if it fills two in hours?
Three workers paint a fence in days. How long would four workers take, assuming equal work rates? State the key assumption.
A small pump fills a tank in hours and a large pump in hours. How long do they take together?
A fixed arrangement has rows of chairs. Find the number of rows if there are chairs per row. Also find the period length if a school changes from periods of minutes to periods, keeping total school hours unchanged.
A factory needs machines to make a fixed number of toys in days. How many machines are needed to finish in days? Also, how long does a car take to cover its route at km/h if it takes hours at km/h?
Do not call quantities inversely proportional just because one rises while the other falls; check that their product stays constant under the stated conditions.
Quick recap
- For inverse proportion, the product of corresponding values remains constant.
- For a fixed job, more equal-rate workers mean fewer days.
- For identical pumps and a fixed tank, more pumps mean less filling time.
- For a fixed supply, more users mean fewer days of supply.
- When workers or pumps work together, add their rates; take the reciprocal for the completion time.
- At a fixed rate, cost, work, distance, or tank count can vary directly with the corresponding quantity.
Summary
Ratios and Dividing a Quantity
Dividing a quantity in a ratio — If a total is divided in the ratio p:q:r:s:ldots, each part equals the total multiplied by its ratio term divided by the sum of all the terms.
Use the corresponding ratio term for each part.
Divide a total in a ratio
- Add all the ratio terms.
- For each part, multiply the total by its ratio term divided by the sum.
- Check that the parts add to the original total.
Divide in the ratio .
- Divide in the ratio .
- Find the sum of the ratio terms.
- Calculate the three parts using the total and each term.
- Check the parts add to the total.
Direct Proportion
Directly proportional quantities — Two quantities are directly proportional if they change by the same factor and their quotient remains constant.
For corresponding values of directly proportional quantities, the quotient is constant: , where is a constant.
Use the constant quotient to find an unknown corresponding value.
If corresponds to , find when , assuming direct proportion.
- If corresponds to , find when , assuming direct proportion.
- Set the quotients equal.
- Cross-multiply and solve for the unknown.
Inverse Proportion
Inversely proportional quantities — Two quantities are inversely proportional if when one changes by a factor, the other changes by its reciprocal.
For corresponding values of inversely proportional quantities, the product is constant: , where is a constant.
Use the constant product to find an unknown corresponding value.
If corresponds to , find when , assuming inverse proportion.
- If corresponds to , find when , assuming inverse proportion.
- Set the products equal.
- Solve for the unknown.
Divide in the ratio .
If corresponds to , find when , assuming direct proportion.
If corresponds to , find when , assuming inverse proportion.
Quick recap
- A ratio describes quantities in their stated order.
- To divide a total in a ratio, multiply by each term over the sum of all terms.
- Directly proportional quantities change by the same factor and have a constant quotient.
- Inversely proportional quantities change by reciprocal factors and have a constant product.
Formula sheet
Mathematics — ALL CHAPTERS
1
A Square And A Cube
2
Power Play
3
A Story of Numbers
4
Quadrilaterals
5
Number Play
6
We Distribute, Yet Things Multiply
7
Proportional Reasoning-1
1
Fractions in Disguise
2
The Baudhayana-Pythagoras Theorem
3
Proportional Reasoning-2
4
Exploring Some Geometric Themes
5
Tales by Dots and Lines
6
Algebra Play
7
Area