NEET UG . NEET Chemistry . Chemistry . Organic Chemistry Some Basic Principles and Techniques

Chapter 8: Organic Chemistry - Some Basic Principles and Techniques

Ch 8

NEET Chemistry

NEET UG

Lecture 1

General Introduction

Meaning and Scope of Organic Chemistry

Composition and Early View

  • Hydrocarbons contain carbon and hydrogen.
  • Other elements in organic compounds may include nitrogen, oxygen, sulphur, phosphorus and halogens.
  • Berzelius, a Swedish chemist, proposed that a special “vital force” was needed to form organic compounds.

Synthesis of Organic Compounds in the Laboratory

  • Wöhler synthesised urea—the first organic compound synthesised from an inorganic compound—using ammonium cyanate.
  • Kolbe synthesised acetic acid, and Berthelot synthesised methane, from inorganic sources.
  • Significance: These syntheses showed that organic compounds can be produced in the laboratory from inorganic substances, challenging the vital-force idea.
\ceNH4CNO−>[Δ]NH2CONH2\ce{NH4CNO ->[\Delta] NH2CONH2}
Heating ammonium cyanate forms urea.

Quick recap

  • Organic chemistry studies hydrocarbons and their derivatives.
  • Organic compounds may contain elements such as N, O, S, P and halogens in addition to carbon and hydrogen.
  • Berzelius proposed that a vital force was required to form organic compounds.
  • Wöhler synthesised the first organic compound from an inorganic compound: urea from ammonium cyanate.
  • Kolbe’s acetic acid and Berthelot’s methane syntheses further showed that organic compounds can be made from inorganic sources.
Lecture 2

Tetravalence of Carbon : Shapes of Organic Compounds

Shapes of Carbon Compounds

What determines molecular shape?

  • Shape is described using orbital hybridisation and the formation of c and c bonds.
  • Electron pairs The shape of a covalent molecule depends on the number of bond pairs and lone pairs around its atoms.
Common carbon hybridisations
HybridisationGeometryBond angles-characterp-characterExamples
spspLinear180∘180^\circ50%50\%50%50\%Ethyne, propyne
sp2sp^2Trigonal planar120∘120^\circ33.3%33.3\%66.6%66.6\%Ethene, propene
sp3sp^3Tetrahedral109∘28′109^\circ 28'25%25\%75%75\%Ethane, propane

Characteristic Features of Pi Bonds

Formation and properties

  • Formation A c bond forms by sideways overlap of orbitals; its electron density lies above and below the internuclear axis.
  • Node There is almost zero electron density along the internuclear axis. The bond has one nodal plane coinciding with that axis, perpendicular to the main direction of the pp orbitals.
  • Formation order A c bond forms only after the c bond has formed.
  • Strength and reactivity A c bond is weaker and more reactive than a c bond.
  • Rotation Free rotation is not possible about a c bond.
  • Reactive centres In molecules with multiple bonds, c bonds generally provide the most reactive centres.
★ Remember
  • As bond multiplicity increases: bond strength increases, while bond length decreases.
Carbon–carbon single, double and triple bonds: bond strength increases as bond length decreases.
Carbon–carbon single, double and triple bonds: bond strength increases as bond length decreases.

Quick recap

  • Molecular shape depends on hybridisation and the number of bond pairs and lone pairs.
  • spsp, sp2sp^2 and sp3sp^3 carbon have linear, trigonal planar and tetrahedral geometries, respectively.
  • A c bond forms by sideways overlap and has electron density above and below the internuclear axis.
  • A c bond forms after a c bond; it is weaker, more reactive and restricts free rotation.
  • Increasing bond multiplicity increases bond strength and decreases bond length.
Lecture 3

Structural Representations of Organic Compounds

Complete and Condensed Structural Formulas

Definition

Complete structural formula — A representation that shows the atoms in a molecule and the bonds between them.

Complete structures of ethane, ethene and ethyne, illustrating single, double and triple carbon–carbon bonds.
Complete structures of ethane, ethene and ethyne, illustrating single, double and triple carbon–carbon bonds.
Definition

Condensed structural formula — A representation that omits bonds to each carbon and writes each distinct structural unit together; subscripts show multiple attached atoms, including hydrogen atoms.

Examples of condensed structural formulas
CompoundMolecular formulaCondensed structural formula
Ethane\ceC2H6\ce{C2H6}\ceCH3CH3\ce{CH3CH3}
Ethene\ceC2H4\ce{C2H4}\ceH2C=CH2\ce{H2C=CH2}
Ethyne\ceC2H2\ce{C2H2}\ce{HC#CH}

Three-Dimensional Representation: Wedge-and-Dash Formula

Definition

Wedge-and-dash formula — A notation that represents the three-dimensional arrangement of bonds in a molecule using solid wedges, dashed wedges and normal lines.

Meaning of bond styles
Bond styleOrientation
Solid wedge or heavy lineProjects above the plane of the paper, toward the observer
Dashed wedge or dashed lineProjects below the plane of the paper, away from the observer
Normal lineLies in the plane of the paper
Wedge-and-dash notation distinguishes bonds in the plane, toward the observer and away from the observer.
Wedge-and-dash notation distinguishes bonds in the plane, toward the observer and away from the observer.
★ Remember
  • A tetrahedral atom bonded to four groups can be shown in two dimensions using wedge-and-dash notation.
  • Solid wedge = toward the observer; dashed wedge = away; normal line = in the plane.

Quick recap

  • Complete structural formulas show atoms and the bonds between them.
  • Condensed formulas omit bonds to carbon and write structural units together.
  • Ethane, ethene and ethyne have single, double and triple carbon–carbon bonds, respectively.
  • In wedge-and-dash notation, solid wedges point toward the observer and dashed wedges point away.
  • Normal lines represent bonds lying in the plane of the paper.
Lecture 4

Classification of Organic Compounds

Organic compounds are classified into open-chain and cyclic compounds, with further subdivisions.
Organic compounds are classified into open-chain and cyclic compounds, with further subdivisions.

Main Structural Classes

Classification by Carbon Skeleton
ClassStructureSubdivisions / examples
Open-chain (acyclic)Carbon atoms form straight or branched chains; no ring is present.Straight-chain: propane; branched-chain: 2-methylpropane
Cyclic (closed-chain)Atoms form one or more rings.Homocyclic: ring contains only carbon atoms; heterocyclic: ring contains other atoms as well
Homocyclic: alicyclicCarbon-only rings that are non-aromatic.Cyclohexane
Homocyclic: aromaticCarbon-only rings with aromatic character.Benzene
HeterocyclicAt least one ring atom is an element other than carbon.Pyridine

Functional Groups

Definition

Functional group — An atom or group of atoms attached in a specific way that gives an organic compound its characteristic chemical properties.

Examples of Functional Groups
Functional groupRepresentation
Hydroxyl−OH-\mathrm{OH}
Aldehyde−CHO-\mathrm{CHO}
Carboxylic acid−COOH-\mathrm{COOH}

Homologous Series

Definition

Homologous series — A family of structurally similar organic compounds with the same functional group, in which consecutive members differ by a −CH2−-\mathrm{CH_2}- unit.

Examples

  • Common series: Alkanes, alkenes, alkynes, haloalkanes, alkanols, alkanals, alkanones, alkanoic acids and amines.
  • Consecutive members: Each next member of a homologous series differs from the previous one by −CH2−-\mathrm{CH_2}-.

Quick recap

  • Organic compounds are broadly open-chain or cyclic.
  • Open-chain compounds have straight or branched carbon chains; cyclic compounds contain rings.
  • Cyclic compounds may be homocyclic or heterocyclic.
  • A functional group determines characteristic chemical properties.
  • Members of a homologous series share a functional group and differ successively by −CH2−-\mathrm{CH_2}-.
Lecture 5

Nomenclature of Organic Compounds

Parts of an IUPAC Name and Functional-Group Priority

Definition

IUPAC name — A systematic name built from five components that identify the compound’s substituents, carbon skeleton, saturation and principal functional group.

Name components, in order

  1. Secondary prefix → Primary prefix → Word root → Primary suffix → Secondary suffix
  2. Secondary prefix: additional substituents; primary prefix: features such as a ring; word root: number of carbon atoms in the parent skeleton.
  3. Primary suffix: saturation or unsaturation; secondary suffix: principal functional group.
Principal functional-group priority (highest to lowest)
Priority orderGroupFunctional group
1—COOH—COOHCarboxylic acid
2—SO3H—SO_3HSulfonic acid
3—COOR—COOREster
4—COCl—COClAcid halide
5—CONH2—CONH_2Amide
6—CN—CNNitrile
7—HC=O—HC=OAldehyde
8>C=O>C=OKetone
9—OH—OHAlcohol
10—NH2—NH_2Amine
11>C=C<>C=C<Alkene
12—C≡C——C\equiv C—Alkyne

Choosing the principal functional group

  • Priority rule: In a compound with multiple functional groups, the highest-priority group is selected as the principal group.
  • Naming consequence: The principal group is indicated by the suffix; other functional groups are generally indicated by prefixes.
IUPAC name components, prefixes, word roots, suffixes and numbering rules.
IUPAC name components, prefixes, word roots, suffixes and numbering rules.

Nomenclature of Substituted Benzene Compounds

Substituted benzene

  • Basic naming: Name the substituent as a prefix before the word benzene.
  • Disubstituted ring: Number the ring to give the substituents the lowest possible set of locants.
  • Trivial positional names: Ortho (oo) = 1,21,2; meta (mm) = 1,31,3; para (pp) = 1,41,4 disubstitution.
  • Three or more substituents: Use the common name of the benzene derivative as the base; assign position 11 to its defining substituent, then give the other substituents the lowest possible locants.
Ortho, meta and para positions on a disubstituted benzene ring.
Ortho, meta and para positions on a disubstituted benzene ring.

Phenyl as a substituent

  • Phenyl group: When a benzene ring is attached to an alkane that contains a functional group, the ring is named as the substituent phenyl (C6H5C_6H_5), abbreviated Ph.

State the order of the five parts of a complete IUPAC name.

Answer: Secondary prefix → primary prefix → word root → primary suffix → secondary suffix.

What do ortho, meta and para indicate in disubstituted benzene?

Answer: Ortho indicates 1,21,2; meta indicates 1,31,3; para indicates 1,41,4 substitution.

Quick recap

  • A complete IUPAC name has five components in a fixed order.
  • The highest-priority functional group is the principal group and is named by the suffix.
  • Functional-group priority decreases from carboxylic acid to alkyne.
  • Substituted benzene names place the substituent before “benzene”; numbering gives the lowest locants.
  • For disubstituted benzene, ortho = 1,21,2, meta = 1,31,3 and para = 1,41,4.
  • A benzene ring attached to a functionalised alkane can be named as phenyl, C6H5C_6H_5 (Ph).
Lecture 6

Isomerism

Definition

Isomerism — The existence of two or more compounds with the same molecular formula but different properties is called isomerism.

Types of Isomerism

Classification of isomerism into structural and stereoisomerism and their subtypes.
Classification of isomerism into structural and stereoisomerism and their subtypes.
Structural vs Stereoisomerism
PointStructural isomerismStereoisomerism
DifferenceAtoms are connected in a different order.Atoms have the same connectivity but differ in their spatial arrangement.
Main typesChain, position, functional, metamerism and tautomerism.Geometrical and optical isomerism.
ExampleButane and 2-methylpropane both have formula C4H10C_4H_{10}.Cis- and trans-but-2-ene have the same connectivity but different spatial arrangements.
Types of Structural Isomerism
TypeHow structures differExample
ChainDifferent arrangement of the carbon skeleton.Butane and 2-methylpropane, C4H10C_4H_{10}.
PositionDifferent position of a functional group, substituent or multiple bond on the same carbon skeleton.But-1-ene and but-2-ene, C4H8C_4H_8.
FunctionalSame molecular formula but different functional groups.Ethanol and dimethyl ether, C2H6OC_2H_6O.
MetamerismDifferent alkyl groups on either side of the same polyvalent atom or functional group.Ethoxyethane and 1-methoxypropane, C4H10OC_4H_{10}O.
TautomerismInterconversion involving migration of a hydrogen atom and rearrangement of bonds.Keto-enol forms.
Classification of isomerism with examples of structural and stereoisomers.
Classification of isomerism with examples of structural and stereoisomers.

Geometrical Isomerism

Conditions in Alkenes

  • Restricted rotation: The carbon-carbon double bond prevents free rotation, allowing distinct spatial arrangements.
  • Substituent condition: Each carbon of the double bond must be attached to two different groups.
  • Result: If either double-bonded carbon has two identical groups, geometrical isomerism is not possible.
  • Example: But-2-ene forms cis and trans isomers; but-1-ene does not show geometrical isomerism.
Substituent conditions required for geometrical isomerism in alkenes.
Substituent conditions required for geometrical isomerism in alkenes.

Tautomerism

Definition

Tautomerism — A type of structural isomerism in which a hydrogen atom migrates between polyvalent atoms within the same molecule, with a simultaneous rearrangement of bonds.

\ceCH3COCH3<=>CH2=C(OH)CH3\ce{CH3COCH3 <=> CH2=C(OH)CH3}
Keto-enol tautomerism: the two forms differ by hydrogen migration and a shift in the double bond.
⚠ Common mistake

Do not confuse structural and stereoisomers: structural isomers differ in atom connectivity, while stereoisomers retain the same connectivity and differ in spatial arrangement.

Quick recap

  • Isomers share a molecular formula but differ in properties.
  • Structural isomers differ in how their atoms are connected; stereoisomers differ in spatial arrangement.
  • Structural isomerism includes chain, position, functional, metamerism and tautomerism.
  • Alkene geometrical isomerism requires each double-bonded carbon to have two different groups.
  • Tautomerism involves hydrogen migration and bond rearrangement, as in keto-enol forms.
Lecture 7

Fundamental Concepts in Organic Reaction Mechanism

Overview of an Organic Reaction

Definition

Organic reaction mechanism — The sequence of bond changes by which a substrate reacts with a reagent to form products, often through intermediates and byproducts.

General reaction sequence

  1. Substrate + attacking reagent → intermediate(s) → product(s) + byproduct(s)
General pathway from substrate and attacking reagent through intermediates to products and byproducts.
General pathway from substrate and attacking reagent through intermediates to products and byproducts.

Fission of a Covalent Bond

Bond-cleavage types
TypeElectron movementSpecies formed
Homolytic (symmetrical)Each bonded atom takes one electron from the shared pair.Two free radicals
Heterolytic (unsymmetrical)One atom takes both bonding electrons, usually the more electronegative atom.A positive ion and a negative ion
\ceR−X−>[Heat/Light]R.+X.\ce{R-X ->[Heat/Light] R^. + X^.}
Heat or light can initiate symmetrical bond fission.
\ceR−X−>R++X−or\ceR−X−>R−+X+\ce{R-X -> R+ + X-} \quad\text{or}\quad \ce{R-X -> R- + X+}
The direction depends on which atom receives the electron pair.
Heterolysis gives a carbocation or carbanion according to which bonded atom takes both electrons.
Heterolysis gives a carbocation or carbanion according to which bonded atom takes both electrons.
Important carbon intermediates
IntermediateDefinitionCarbon geometryStability order
CarbocationCarbon species bearing a positive charge.sp2sp^2; planar3∘>2∘>1∘3^\circ > 2^\circ > 1^\circ
CarbanionCarbon species bearing a negative charge.sp3sp^3; pyramidal1∘>2∘>3∘1^\circ > 2^\circ > 3^\circ
Free radicalAtom or group with an unpaired electron.sp2sp^2; planar3∘>2∘>1∘3^\circ > 2^\circ > 1^\circ

Relative stability sequences

  • Carbocations: The listed straight-chain series is \ceCH3CH2CH2CH2+>CH3CH2CH2+>CH3CH2+>CH3+\ce{CH3CH2CH2CH2+ > CH3CH2CH2+ > CH3CH2+ > CH3+}.
  • Carbocations: \ce{Ph3C+ > Ph2CH+ > PhCH2+ > (CH3)3C+ > (CH3)2CH+ > CH3+ > HC#C+ > C6H5+}.
  • Carbanions: \ce{(C6H5)3C- > (C6H5)2CH- >> C6H5CH2- > CH2=CH-CH2- > HC#C- > H2C=CH- > CH3- > CH3CH2- > (CH3)2CH- > (CH3)3C-}.
  • Radicals: \ceC6H5CH2.>CH2=CHCH2.>(CH3)3C.>(CH3)2CH.>CH3CH2.>CH3.\ce{C6H5CH2^. > CH2=CHCH2^. > (CH3)3C^. > (CH3)2CH^. > CH3CH2^. > CH3^.}; the first two are benzyl and allyl radicals.

Attacking Reagents

Definition

Electrophile — An electron-deficient species that seeks a region of high electron density; it accepts an electron pair and acts as a Lewis acid.

Electrophiles
ClassExamples
Positively charged\ceH3O+\ce{H3O+}, \ceX+\ce{X+} (\ceX=Cl,Br,I\ce{X = Cl, Br, I}), \ceNO2+\ce{NO2+}, \ceNO+\ce{NO+}, \ceNH4+\ce{NH4+}, \ceSO3H+\ce{SO3H+}, \ceC6H5N2+\ce{C6H5N2+}, \ceR+\ce{R+}, \ceRCO+\ce{RCO+}
Neutral\ceBF3\ce{BF3}, \ceAlCl3\ce{AlCl3}, \ceFeCl3\ce{FeCl3}, \ceBeCl2\ce{BeCl2}, \ceZnCl2\ce{ZnCl2}, \ceSO3\ce{SO3}, \ceCO2\ce{CO2}, \ceCS2\ce{CS2}, \ceCX4\ce{CX4}, \ceRCOCl\ce{RCOCl}, \ce>C=O\ce{>C=O}, \ce:CCl2\ce{:CCl2}
Definition

Nucleophile — An electron-rich species with an available electron pair that attacks an electron-deficient site; it donates an electron pair and acts as a Lewis base.

Nucleophiles
ClassExamples
Negatively charged\ceH−\ce{H-}, \ceOH−\ce{OH-}, \ceX−\ce{X-}, \ceCN−\ce{CN-}, \ceN3−\ce{N3-}, \ceRO−\ce{RO-}, \ceR−\ce{R-}, \ceRS−\ce{RS-}, \ceSH−\ce{SH-}, \ceHSO3−\ce{HSO3-}, \ceNO2−\ce{NO2-}, \ceNH2−\ce{NH2-}, \ceRCOO−\ce{RCOO-}, \ce{HC#C-}
Neutral\ceNH3\ce{NH3}, \ceH2O\ce{H2O}, \ceROH\ce{ROH}, \ceROR\ce{ROR}, \ceRSH\ce{RSH}, \ceRMgX\ce{RMgX}, \cePh3P\ce{Ph3P}, \ceRLi\ce{RLi}, \ceLiAlH4\ce{LiAlH4}
Electrophiles vs Nucleophiles
PointElectrophileNucleophile
Electron characterElectron-deficientElectron-rich
RoleAccepts an electron pair; Lewis acidDonates an electron pair; Lewis base
AttacksA site of high electron densityAn electron-deficient site

Electron Displacement Effects in Covalent Bonds

Main electron-displacement effects
EffectNatureKey points
InductivePermanent displacement of σ\sigma electrons through a saturated carbon chain.Caused by electron-withdrawing (−I-I) or electron-donating (+I+I) groups; effect is transmitted along the chain.
ElectromericTemporary, complete transfer of π\pi electrons in a multiple bond.Occurs only in the presence of an attacking reagent.
Resonance (mesomeric)Polarity from interaction of π\pi bonds, or a π\pi bond with a neighbouring lone pair.The effect is transmitted through the conjugated system of alternating single and double bonds.
HyperconjugationDelocalisation of σ\sigma electrons of an alkyl C–H bond.The alkyl group must be directly attached to an unsaturated atom or an atom with an unshared pp orbital; it is permanent.

Inductive-effect orders

  • Decreasing −I-I effect: \ce−NO2>−CN>−COOH>−F>−Cl>−Br>−I>−H\ce{-NO2 > -CN > -COOH > -F > -Cl > -Br > -I > -H}.
  • Decreasing +I+I effect: \ce(CH3)3C−>(CH3)2CH−>CH3CH2−>CH3−>D−>H−\ce{(CH3)3C- > (CH3)2CH- > CH3CH2- > CH3- > D- > H-}.
Electromeric and resonance directions
EffectElectron movement
+E+EElectrons move towards the atom to which the attacking reagent attaches.
−E-EElectrons move away from the atom to which the attacking reagent attaches.
+R+R or +M+MElectron-donating groups: \ce−OH\ce{-OH}, \ce−OR\ce{-OR}, \ce−OCOR\ce{-OCOR}, \ce−SH\ce{-SH}, \ce−SR\ce{-SR}, amino groups, and halogens.
−R-R or −M-MElectron-withdrawing groups: \ce−COOH\ce{-COOH}, \ce>C=O\ce{>C=O}, \ce−CHO\ce{-CHO}, \ce−COOR\ce{-COOR}, \ce−CN\ce{-CN}, and \ce−NO2\ce{-NO2}.

Hyperconjugation

  • Dependence: For an alkyl group attached to an unsaturated system, hyperconjugative effect decreases as the number of α\alpha-hydrogens decreases.
  • Order: \ceCH3−>CH3CH2−>(CH3)2CH−>(CH3)3C−\ce{CH3- > CH3CH2- > (CH3)2CH- > (CH3)3C-}.

Photolysis or Pyrolysis

Small-molecule elimination

  • Diazomethane: Photolysis or heating produces methylene carbene and nitrogen.
  • Ketene: Photolysis or heating produces methylene carbene and carbon monoxide.
\ceCH2N2−>[hν/Δ]:CH2+N2\ce{CH2N2 ->[h\nu/\Delta] :CH2 + N2}
\ceCH2=C=O−>[hν/Δ]:CH2+CO\ce{CH2=C=O ->[h\nu/\Delta] :CH2 + CO}

Ambiphiles

Definition

Ambiphile (ambident species) — A species with both electrophilic and nucleophilic sites, so it can behave in either way.

Examples

  • Charged: In \ceH3O+\ce{H3O+}, oxygen acts as a nucleophilic site and hydrogen atoms act as electrophilic sites.
  • Neutral: In \ceROH\ce{ROH}, \ceH2O\ce{H2O}, and \ceRPH2\ce{RPH2}, oxygen or phosphorus acts as a nucleophilic site, while hydrogen acts as an electrophilic site.

How do homolytic and heterolytic bond fission differ?

Answer: Homolysis gives each atom one bonding electron and forms radicals; heterolysis gives both electrons to one atom and forms oppositely charged ions.

Define electrophiles and nucleophiles in terms of Lewis theory.

Answer: Electrophiles accept an electron pair and are Lewis acids; nucleophiles donate an electron pair and are Lewis bases.

Quick recap

  • Homolytic cleavage forms radicals; heterolytic cleavage forms ions.
  • Carbocations are planar sp2sp^2 species, while carbanions are pyramidal sp3sp^3 species.
  • Electrophiles accept electron pairs; nucleophiles donate them.
  • Inductive, electromeric, resonance, and hyperconjugative effects describe different electron displacements.
  • Electromeric effects are temporary and require an attacking reagent; inductive and hyperconjugative effects are permanent.
  • Heating or irradiation of diazomethane and ketene produces methylene carbene.
Lecture 8

Methods of Purification of Organic Compounds

Definition

Purification of organic compounds — The separation of an organic compound from impurities using differences in the physical properties of mixture components.

Methods based on physical properties

Purification methods
MethodPrinciple / when usedExample or application
CrystallisationUses different solubilities of the compound and impurities in the same solvent.Impure sugar is shaken with hot ethanol at 348 K: sugar dissolves, while common salt remains insoluble.
SublimationA sublimable solid changes directly from solid to vapour; non-sublimable impurities remain behind.Iodine is separated from sodium chloride. Also used to purify camphor, naphthalene, anthracene and benzoic acid.
DistillationSeparates a volatile liquid from non-volatile impurities, or liquids with sufficiently different boiling points.Hexane (342 K) and toluene (384 K); chloroform (334 K) and aniline (457 K).
Fractional distillationSeparates liquids whose boiling points are close; higher-boiling vapours condense before lower-boiling vapours.Separates crude oil into fractions such as gasoline, kerosene, diesel and lubricating oil.
Distillation under reduced pressurePurifies high-boiling liquids that decompose at or below their boiling point.Glycerol is separated from spent-lye in the soap industry.
Steam distillationUsed for steam-volatile substances that are immiscible with water, contain non-volatile impurities, and have vapour pressure of 10–15 mm Hg at 373 K.Separates aniline from aniline–water mixture; also purifies essential oils, turpentine oil, o-nitrophenol, bromobenzene and nitrobenzene.
Differential extractionAn organic compound is shaken with an immiscible organic solvent in which it is more soluble than in water; the two layers are separated using a separating funnel.Benzoic acid is extracted from aqueous solution using benzene.

Chromatography

Definition

Chromatography — A separation method based on the different movement of mixture components through a stationary phase under the influence of a mobile phase.

Uses

  • Applications: Separates, purifies, identifies and characterises components of mixtures, whether coloured or colourless.
  • Main types: Adsorption chromatography and partition chromatography.
Types of chromatography
TypePrinciple / setupExample or application
Adsorption chromatographyComponents are adsorbed to different extents on an adsorbent such as silica gel or alumina.Includes column and thin-layer chromatography.
Column chromatographyThe mixture passes through adsorbent packed in a glass tube.Separates a mixture of naphthalene and benzophenone.
Thin-layer chromatographyThe mixture passes over adsorbent spread on a thin glass plate.Amino acids can be detected by spraying the plate with ninhydrin solution.
Partition chromatographyComponents partition differently between the stationary and mobile phases.Used to separate sugars and amino acids.
Paper chromatographyA special chromatography paper is used; water trapped in the paper acts as the stationary phase.Used to separate sugars and amino acids.

When is distillation under reduced pressure used?

Answer: It is used for high-boiling liquids that decompose at or below their boiling point; glycerol recovery from spent-lye is an example.

Quick recap

  • Choose a purification method according to differences in physical properties of the mixture components.
  • Crystallisation uses solubility differences; sublimation separates sublimable solids from non-sublimable impurities.
  • Distillation separates liquids with sufficiently different boiling points; fractional distillation handles closer boiling points.
  • Reduced-pressure distillation is suitable for high-boiling, heat-sensitive liquids; steam distillation suits specific steam-volatile, water-immiscible compounds.
  • Differential extraction depends on preferential solubility in an immiscible organic solvent.
  • Chromatography separates components through differential movement or adsorption/partition between phases.
Lecture 9

Qualitative Analysis of Organic Compounds

Detection of Carbon and Hydrogen

Copper(II) oxide test

  • Principle: Heating an organic compound with copper(II) oxide oxidises its carbon to carbon dioxide and hydrogen to water.
  • Carbon confirmation: The evolved carbon dioxide turns lime water milky by forming calcium carbonate.
  • Hydrogen confirmation: Water droplets form on the cooler part of the tube; anhydrous copper(II) sulphate changes from white to blue.
\ce2CuO+C−>[Δ]2Cu+CO2\ce{2CuO + C ->[\Delta] 2Cu + CO2}
\ceCO2+Ca(OH)2−>CaCO3v+H2O\ce{CO2 + Ca(OH)2 -> CaCO3 v + H2O}
\ceCuO+2H−>[Δ]Cu+H2O\ce{CuO + 2H ->[\Delta] Cu + H2O}
\ceCuSO4+5H2O−>CuSO4.5H2O\ce{CuSO4 + 5H2O -> CuSO4.5H2O}

Lassaigne’s Extract

Definition

Lassaigne’s extract (L.E.) — The aqueous extract obtained after sodium fusion, in which elements such as nitrogen, sulphur and halogens are present as water-soluble sodium salts.

Detection of Nitrogen

Prussian blue test

  • Conversion: Sodium fusion converts nitrogen into sodium cyanide in the extract.
  • Test sequence: Add iron(II) sulphate and sodium hydroxide to L.E.; boil and cool, then add iron(III) chloride and concentrated hydrochloric acid.
  • Positive result: A blue or green colour, associated with Prussian blue formation, indicates nitrogen.
\ceNa+C+N−>[Δ]NaCN\ce{Na + C + N ->[\Delta] NaCN}
\ceFeSO4+2NaOH−>Fe(OH)2+Na2SO4\ce{FeSO4 + 2NaOH -> Fe(OH)2 + Na2SO4}
\ceFe(OH)2+6NaCN−>Na4[Fe(CN)6]+2NaOH\ce{Fe(OH)2 + 6NaCN -> Na4[Fe(CN)6] + 2NaOH}
\ce3Na4[Fe(CN)6]+4FeCl3−>Fe4[Fe(CN)6]3+12NaCl\ce{3Na4[Fe(CN)6] + 4FeCl3 -> Fe4[Fe(CN)6]3 + 12NaCl}

Detection of Sulphur

Confirmatory tests

  • Conversion: Sodium fusion converts sulphur into sodium sulphide in L.E.
  • Sodium nitroprusside test: L.E. gives a deep-violet colour with sodium nitroprusside.
  • Lead acetate test: Add lead acetate in the presence of acetic acid; a black lead sulphide precipitate confirms sulphur.
\ce2Na+S−>[Δ]Na2S\ce{2Na + S ->[\Delta] Na2S}
\ceNa2S+Na2[Fe(CN)5NO]−>Na4[Fe(CN)5NOS]\ce{Na2S + Na2[Fe(CN)5NO] -> Na4[Fe(CN)5NOS]}
\ceNa2S+(CH3COO)2Pb−>[CH3COOH]PbSv+2CH3COONa\ce{Na2S + (CH3COO)2Pb ->[CH3COOH] PbS v + 2CH3COONa}

Detection of Halogens

Silver nitrate test

  • Conversion: Sodium fusion converts a halogen, represented by XX, into sodium halide in L.E.
  • Test: Acidify L.E. with nitric acid, then add silver nitrate; identify the halogen from the silver halide precipitate and its solubility in aqueous ammonia.
  • Chlorine: White precipitate, soluble in aqueous ammonia.
  • Bromine: Yellow precipitate, partially soluble in aqueous ammonia.
  • Iodine: Yellow precipitate, insoluble in aqueous ammonia.
\ceNa+X−>[Δ]NaX\ce{Na + X ->[\Delta] NaX}
\ceNaX+AgNO3−>[HNO3]AgXv+NaNO3\ce{NaX + AgNO3 ->[HNO3] AgX v + NaNO3}
\ceAgCl+2NH3(aq)−>[Ag(NH3)2]Cl\ce{AgCl + 2NH3(aq) -> [Ag(NH3)2]Cl}

Detection of Nitrogen and Sulphur Together

Blood-red test

  • Conversion: When both nitrogen and sulphur are present, sodium fusion forms sodium thiocyanate in L.E.
  • Test sequence: Follow the nitrogen-test procedure: add iron(II) sulphate and sodium hydroxide, boil and cool, then add iron(III) chloride and concentrated hydrochloric acid.
  • Confirmation: A blood-red colour instead of the blue or green nitrogen-test colour confirms the presence of both nitrogen and sulphur.
\ceNa+C+N+S−>[Δ]NaSCN\ce{Na + C + N + S ->[\Delta] NaSCN}
\ceNaSCN+FeCl3−>[Fe(SCN)]Cl2+NaCl\ce{NaSCN + FeCl3 -> [Fe(SCN)]Cl2 + NaCl}

Detection of Phosphorus

Ammonium molybdate test

  • Conversion: Boiling the organic compound with sodium peroxide converts phosphorus into sodium phosphate.
  • Test sequence: Boil the resulting solution with nitric acid, then add ammonium molybdate.
  • Positive result: A yellow precipitate of ammonium phosphomolybdate indicates phosphate and therefore phosphorus.
\ce2P+5Na2O2−>[boil,Δ]2Na3PO4+2Na2O\ce{2P + 5Na2O2 ->[boil,\Delta] 2Na3PO4 + 2Na2O}
Sodium peroxide fusion; the balanced equation includes sodium oxide as a coproduct.
\ceNa3PO4+3HNO3−>H3PO4+3NaNO3\ce{Na3PO4 + 3HNO3 -> H3PO4 + 3NaNO3}
\ceH3PO4+12(NH4)2MoO4+21HNO3−>(NH4)3PO4.12MoO3+21NH4NO3+12H2O\ce{H3PO4 + 12(NH4)2MoO4 + 21HNO3 -> (NH4)3PO4.12MoO3 + 21NH4NO3 + 12H2O}

Quick recap

  • Heating an organic compound with copper(II) oxide converts carbon and hydrogen into carbon dioxide and water; carbon dioxide clouds lime water and water turns anhydrous copper(II) sulphate blue.
  • Sodium fusion places nitrogen, sulphur and halogens in Lassaigne’s extract as soluble sodium salts.
  • Nitrogen gives a blue or green Prussian blue test after iron(II) sulphate and sodium hydroxide treatment, followed by boiling, cooling and iron(III) chloride with concentrated hydrochloric acid.
  • Sulphur gives deep violet with sodium nitroprusside or a black lead sulphide precipitate with lead acetate and acetic acid.
  • Silver halide colour and ammonia solubility distinguish chlorine (white, soluble), bromine (yellow, partly soluble) and iodine (yellow, insoluble).
  • Nitrogen and sulphur together form sodium thiocyanate and give a blood-red test; phosphorus gives yellow ammonium phosphomolybdate after conversion to phosphate.
Lecture 10

Quantitative Analysis

Definition

Quantitative analysis of organic compounds — Determining the percentage composition of elements in an organic compound.

Carbon and hydrogen

Liebig’s combustion method

  • Principle: Burn a known mass of compound in excess oxygen; carbon forms carbon dioxide and hydrogen forms water.
  • Absorption: Concentrated \ceKOH\ce{KOH} solution or ascarite (\ceNaOH+CaO\ce{NaOH + CaO}) absorbs \ceCO2\ce{CO2}; anhydrous \ceCaCl2\ce{CaCl2} or \ceMg(ClO4)2\ce{Mg(ClO4)2} absorbs \ceH2O\ce{H2O}.
  • Measurement: The increase in mass of each absorber gives the mass of the corresponding product.
\ceCxHy+(x+y/4)O2−>[A]xCO2+(y/2)H2O\ce{C_xH_y + (x + y/4)O2 ->[A] xCO2 + (y/2)H2O}
Percentage of carbon
%C=1244×m\ceCO2msample×100\%C = \frac{12}{44} \times \frac{m_{\ce{CO2}}}{m_{\text{sample}}} \times 100

Use the mass of \ceCO2\ce{CO2} produced and the original sample mass.

Percentage of hydrogen
%H=218×m\ceH2Omsample×100\%H = \frac{2}{18} \times \frac{m_{\ce{H2O}}}{m_{\text{sample}}} \times 100

Use the mass of \ceH2O\ce{H2O} produced and the original sample mass.

Nitrogen

Dumas method

  • Principle: Heat the nitrogen-containing compound with \ceCuO\ce{CuO} in an atmosphere of \ceCO2\ce{CO2}; nitrogen is liberated as \ceN2\ce{N2}.
  • Separation: Collect the gases over concentrated \ceKOH\ce{KOH}, which absorbs the other gases; measure the remaining \ceN2\ce{N2} at STP.
\ceCxHyNz+(2x+y/2)CuO−>xCO2+(y/2)H2O+(z/2)N2+(2x+y/2)Cu\ce{C_xH_yN_z + (2x + y/2)CuO -> xCO2 + (y/2)H2O + (z/2)N2 + (2x + y/2)Cu}
Percentage of nitrogen by Dumas method
%N=2822400×V\ceN2msample×100\%N = \frac{28}{22400} \times \frac{V_{\ce{N2}}}{m_{\text{sample}}} \times 100

V\ceN2V_{\ce{N2}} is the volume of nitrogen at STP.

Kjeldahl’s method

  • Principle: Digest the compound with excess \ceH2SO4\ce{H2SO4} to convert its nitrogen into ammonium sulfate.
  • Release and estimation: Treat the ammonium sulfate with \ceNaOH\ce{NaOH} to release \ceNH3\ce{NH3}, then absorb the ammonia in a known amount of standard acid.
\ce(NH4)2SO4+2NaOH−>Na2SO4+2NH3+2H2O;\ce2NH3+H2SO4−>(NH4)2SO4\ce{(NH4)2SO4 + 2NaOH -> Na2SO4 + 2NH3 + 2H2O}; \quad \ce{2NH3 + H2SO4 -> (NH4)2SO4}
Percentage of nitrogen by Kjeldahl method
%N=1.4MVbmsample=1.4NVmsample\%N = \frac{1.4MVb}{m_{\text{sample}}} = \frac{1.4NV}{m_{\text{sample}}}

Use acid molarity MM, acid volume VV, and acid basicity bb; alternatively use normality NN.

Halogens

Carius method

  • Principle: Boil the compound with concentrated \ceHNO3\ce{HNO3} and add \ceAgNO3\ce{AgNO3}; halogen is precipitated as silver halide, \ceAgX\ce{AgX}.
  • Measurement: Determine the mass of the silver halide formed.
\ceX−>[HNO3][AgNO3]AgXv\ce{X ->[HNO3][AgNO3] AgX v}
Percentage of halogen
%X=AX108+AX×m\ceAgXmsample×100\%X = \frac{A_X}{108 + A_X} \times \frac{m_{\ce{AgX}}}{m_{\text{sample}}} \times 100

AXA_X is the atomic mass of halogen XX; m\ceAgXm_{\ce{AgX}} is the precipitate mass.

Sulphur

Carius method

  • Conversion: Oxidise sulphur to \ceH2SO4\ce{H2SO4} by boiling with \ceNa2O2\ce{Na2O2} or concentrated \ceHNO3\ce{HNO3}.
  • Precipitation: Add excess aqueous \ceBaCl2\ce{BaCl2} to form white \ceBaSO4\ce{BaSO4}; estimate sulphur from its mass.
\ceS−>[conc.HNO3,heat][BaCl2]BaSO4v\ce{S ->[conc. HNO3, heat][BaCl2] BaSO4 v}
Percentage of sulphur
%S=32233×m\ceBaSO4msample×100\%S = \frac{32}{233} \times \frac{m_{\ce{BaSO4}}}{m_{\text{sample}}} \times 100

Use the mass of \ceBaSO4\ce{BaSO4} formed.

Phosphorus

Ignition method

  • Conversion: Oxidise phosphorus with \ceHNO3\ce{HNO3} to form \ceH3PO4\ce{H3PO4}.
  • Precipitation and weighing: Add \ceMg2+\ce{Mg^{2+}} and \ceNH4Cl\ce{NH4Cl} to precipitate magnesium ammonium phosphate; ignite it to magnesium pyrophosphate, \ceMg2P2O7\ce{Mg2P2O7}.
\ceMg2++NH4++PO43−−>MgNH4PO4v;\ce2MgNH4PO4−>[Δ]Mg2P2O7+2NH3+H2O\ce{Mg^{2+} + NH4+ + PO4^{3-} -> MgNH4PO4 v}; \quad \ce{2MgNH4PO4 ->[\Delta] Mg2P2O7 + 2NH3 + H2O}
Percentage of phosphorus
%P=62222×m\ceMg2P2O7msample×100\%P = \frac{62}{222} \times \frac{m_{\ce{Mg2P2O7}}}{m_{\text{sample}}} \times 100

Use the mass of \ceMg2P2O7\ce{Mg2P2O7} formed.

Oxygen

Indine method

  • Principle: The compound is heated to release oxygen-containing gaseous products. Carbon is converted to \ceCO\ce{CO} at 1575 K1575\ \mathrm{K}; iodine pentoxide oxidises the \ceCO\ce{CO} to \ceCO2\ce{CO2} while forming iodine.
  • Estimation: Oxygen is calculated either from the mass of \ceCO2\ce{CO2} formed or from the mass of \ceI2\ce{I2} formed.
\ce2C+O2−>[1575K]2CO;\ceI2O5+5CO−>I2+5CO2;\ce10C+5O2+2I2O5−>10CO2+2I2\ce{2C + O2 ->[1575 K] 2CO}; \quad \ce{I2O5 + 5CO -> I2 + 5CO2}; \quad \ce{10C + 5O2 + 2I2O5 -> 10CO2 + 2I2}
Percentage of oxygen from carbon dioxide
%O=3288×m\ceCO2msample×100\%O = \frac{32}{88} \times \frac{m_{\ce{CO2}}}{m_{\text{sample}}} \times 100

Use the mass of \ceCO2\ce{CO2} formed.

Percentage of oxygen from iodine
%O=5×162×127×m\ceI2msample×100\%O = \frac{5 \times 16}{2 \times 127} \times \frac{m_{\ce{I2}}}{m_{\text{sample}}} \times 100

Use the mass of \ceI2\ce{I2} formed.

Modern elemental analysis

CHN elemental analyser

  • Use: Modern estimation employs microquantities and automatic experimental techniques.
  • Elements measured: Carbon, hydrogen and nitrogen.
  • Sample size and output: Requires only 11–3 mg3\ \mathrm{mg} of substance and displays results on a screen quickly.

Quick recap

  • Liebig’s method estimates carbon from \ceCO2\ce{CO2} and hydrogen from \ceH2O\ce{H2O} produced during combustion.
  • Dumas estimates nitrogen from the volume of \ceN2\ce{N2} collected at STP.
  • Kjeldahl estimates nitrogen after converting it to ammonia and absorbing it in standard acid.
  • Carius methods estimate halogens from \ceAgX\ce{AgX} and sulphur from \ceBaSO4\ce{BaSO4}.
  • The ignition method estimates phosphorus from the mass of \ceMg2P2O7\ce{Mg2P2O7}.
  • The Indine method estimates oxygen from the mass of \ceCO2\ce{CO2} or \ceI2\ce{I2} formed.
  • A CHN elemental analyser rapidly measures carbon, hydrogen and nitrogen from a 11–3 mg3\ \mathrm{mg} sample.

NEET Chemistry — ALL CHAPTERS

1

Some Basic Concepts of Chemistry

View

2

Structure of Atom

View

3

Classification of Elements and Periodicity in Properties

View

4

Chemical Bonding and Molecular Structure

View

5

Thermodynamics

View

6

Equilibrium

View

7

Redox Reactions

View

8

Organic Chemistry - Some Basic Principles and Techniques

View

9

Hydrocarbons

View

10

Solutions

View

11

Electrochemistry

View

12

Chemical Kinetics

View

13

The d- and f- Block Elements

View

14

Coordination Compounds

View

15

Haloalkanes and Haloarenes

View

16

Alcohols, Phenols and Ethers

View

17

Aldehydes, Ketones and Carboxylic Acids

View

18

Amines

View

19

Biomolecules

View

20

The p-Block Elements (Group 13 and 14)

View

21

The p-Block Elements (Group 15 to 18)

View

22

Principles Related to Practical Chemistry

View