NEET UG . NEET Physics . Physics . Kinetic Theory

Chapter 13: Kinetic Theory

Ch 13

NEET Physics

NEET UG

Lecture 1

Molecular Nature of Matter

Kinetic Theory of Gases

  • Kinetic theory: Explains the behaviour of gases by treating them as rapidly moving atoms or molecules.
  • Significance: It gives a molecular interpretation of pressure and temperature and accounts for gas laws and specific heat capacities.

Molecular Nature of Matter

Definition

Mean free path — The average distance travelled by a molecule between successive collisions.

Quick recap

  • Kinetic theory describes gases as rapidly moving atoms or molecules.
  • Gas pressure and temperature have molecular interpretations in kinetic theory.
  • Matter consists of atoms in perpetual motion, with attraction at small separations and repulsion when compressed.
  • Dalton’s laws cover fixed proportions and multiple proportions by mass.
  • Gay-Lussac’s law relates reacting gas volumes through small-integer ratios.
  • Avogadro’s hypothesis compares equal gas volumes at identical temperature and pressure.
  • Mean free path is the average distance a molecule travels between collisions.
Lecture 2

Behaviour of Gases

Ideal Gas Equation

Gas equation and molecular count

  • Source condition: The lecture states that for gases at low temperature and high pressure, PV=KTPV=KT, where KK is constant for a fixed sample.
  • Molecular form: PV=NkBTPV=Nk_B T, so K=NkBK=Nk_B; kBk_B is Boltzmann’s constant and is the same for all gases.
  • Equal-state comparison: P1V1N1T1=P2V2N2T2=kB\frac{P_1V_1}{N_1T_1}=\frac{P_2V_2}{N_2T_2}=k_B. At the same PP, VV and TT, different gases have the same number of molecules.
  • Mole form: PV=μRTPV=\mu RT, where μ\mu is the amount of gas in moles.
Perfect gas equation
PV=NkBT=μRTPV=Nk_BT=\mu RT

The gas constants are related by R=NAkBR=N_Ak_B.

Molar amount
μ=MM0=NNA\mu=\frac{M}{M_0}=\frac{N}{N_A}

MM is the mass of the gas, M0M_0 its molar mass, and NAN_A Avogadro’s number.

Avogadro’s number, constants and density

  • Avogadro’s number: NA=6.02×1023N_A=6.02\times10^{23} molecules in 22.4 L22.4\,\text{L} of any gas.
  • Constants: kB=1.38×10−23 J K−1k_B=1.38\times10^{-23}\,\text{J K}^{-1} and R=8.314 J mol−1K−1R=8.314\,\text{J mol}^{-1}\text{K}^{-1}.
  • Number density: If n=N/Vn=N/V, then P=nkBTP=nk_BT.
  • Mass density: With ρ=M/V\rho=M/V, the ideal gas equation gives P=ρRTM0P=\frac{\rho RT}{M_0}.
Compressibility factor versus pressure for gases at different temperatures, compared with ideal-gas behaviour.
Compressibility factor versus pressure for gases at different temperatures, compared with ideal-gas behaviour.

Ideal and real gases

  • Ideal gas: A theoretical model that obeys PV=μRTPV=\mu RT exactly at every pressure and temperature.
  • Real gases: No real gas is perfectly ideal; real gases approach ideal behaviour at low pressure and high temperature.

Gas Laws

Boyle’s law

  • Condition: For a fixed amount of gas at constant temperature, PVPV is constant.
  • Relationship: Pressure varies inversely with volume: P∝1VP\propto\frac{1}{V}.
  • Agreement: Real-gas behaviour agrees best with Boyle’s law at high temperatures and low pressures.
Pressure–volume curves for different temperatures, with T_1>T_2>T_3.
Pressure–volume curves for different temperatures, with T1>T2>T3T_1>T_2>T_3.
Boyle’s law
PV=constantPV=\text{constant}

Use for a fixed amount of gas at constant temperature.

Charles’ law

  • Condition: For a fixed amount of gas at constant pressure, volume is proportional to absolute temperature: V∝TV\propto T.
  • Agreement: Real-gas behaviour agrees best with Charles’ law at high temperatures and low pressures.
Temperature–volume curves for three pressures, with P_1>P_2>P_3.
Temperature–volume curves for three pressures, with P1>P2>P3P_1>P_2>P_3.
Charles’ law
VT=constant\frac{V}{T}=\text{constant}

Use for a fixed amount of gas at constant pressure.

Dalton’s Law of Partial Pressures

Definition

Dalton’s law of partial pressures — For a mixture of non-interacting gases, the total pressure equals the sum of the partial pressures of its components.

Partial pressures and mole fraction

  • At fixed temperature and volume: Each component’s partial pressure is Pi=μiRTVP_i=\frac{\mu_iRT}{V}.
  • Total pressure: Ptotal=P1+P2+P3+⋯P_{\text{total}}=P_1+P_2+P_3+\cdots.
  • Mole fraction: The mole fraction of component ii is μiμtotal\frac{\mu_i}{\mu_{\text{total}}}.
  • Component pressure: Pi=Ptotal(μiμtotal)P_i=P_{\text{total}}\left(\frac{\mu_i}{\mu_{\text{total}}}\right).
Total pressure of a gas mixture
Ptotal=∑iPi=RTVμtotalP_{\text{total}}=\sum_i P_i=\frac{RT}{V}\mu_{\text{total}}

Summing the component pressures gives the pressure of the mixture.

State Boyle’s law and give its mathematical form.

Answer: At constant temperature, pressure is inversely proportional to volume; PV=constantPV=\text{constant}.

State Charles’ law and give its mathematical form.

Answer: At constant pressure, volume is proportional to absolute temperature; V/T=constantV/T=\text{constant}.

How is a component’s partial pressure related to its mole fraction?

Answer: Pi=Ptotal(μiμtotal)P_i=P_{\text{total}}\left(\frac{\mu_i}{\mu_{\text{total}}}\right).

Quick recap

  • The lecture states PV=KTPV=KT for gases at low temperature and high pressure, with K=NkBK=Nk_B for a fixed sample.
  • The perfect-gas equation is PV=NkBT=μRTPV=Nk_BT=\mu RT, with R=NAkBR=N_Ak_B and μ=M/M0=N/NA\mu=M/M_0=N/N_A.
  • NA=6.02×1023N_A=6.02\times10^{23} molecules in 22.4 L22.4\,\text{L}; P=nkBTP=nk_BT and P=ρRT/M0P=\rho RT/M_0.
  • Ideal gases obey PV=μRTPV=\mu RT exactly; real gases approach ideal behaviour at low pressure and high temperature.
  • Boyle’s law: at constant temperature, PVPV is constant; Charles’ law: at constant pressure, V/TV/T is constant.
  • Dalton’s law: total pressure is the sum of partial pressures, and Pi=Ptotal(μi/μtotal)P_i=P_{\text{total}}(\mu_i/\mu_{\text{total}}).
Lecture 3

Kinetic Theory of an Ideal Gas

Basic Assumptions

Model of an ideal gas

  • Composition: A gas contains a very large number of molecules.
  • Molecular size: Intermolecular distances are much greater than molecular dimensions.
  • Motion: Molecules move continuously and randomly.
  • Collisions: Molecule–molecule and molecule–wall collisions are perfectly elastic.
  • Forces: Molecules exert no intermolecular force except during collisions; their energy is purely kinetic.
  • Distribution: Gas density is uniform throughout the container.
Gas molecules move randomly and collide with the walls of their container.
Gas molecules move randomly and collide with the walls of their container.

Pressure Exerted by an Ideal Gas

Deriving the pressure relation

  • Setup: Consider NN molecules, each of mass mm, in a cube of side LL and wall area AA; volume V=LAV=LA.
  • Wall collision: For a molecule with xx-component of velocity vxv_x, the component reverses from vxv_x to −vx-v_x. The momentum change in magnitude is 2mvx2mv_x.
  • Return time: Time between successive collisions with the same wall is Δt=2L/vx\Delta t=2L/v_x.
  • Force per molecule: Using momentum change per time, the average force contribution is F=mvx2/LF=mv_x^2/L.
  • Total pressure: Summing contributions and dividing by wall area gives pressure in terms of the mean squared velocity component.
A molecule in a cubical box, showing its velocity components and the wall spacing L.
A molecule in a cubical box, showing its velocity components and the wall spacing LL.
P=Nmv2‾3V=13ρv2‾P=\frac{Nm\overline{v^2}}{3V}=\frac{1}{3}\rho\overline{v^2}
Random motion is isotropic, so the mean squared velocity components are equal: vx2‾=vy2‾=vz2‾=v2‾/3\overline{v_x^2}=\overline{v_y^2}=\overline{v_z^2}=\overline{v^2}/3.
PV=13Nmv2‾=23N⟨KE⟩PV=\frac{1}{3}Nm\overline{v^2}=\frac{2}{3}N\langle KE\rangle
Here, ρ=Nm/V\rho=Nm/V is the gas density and v2‾\overline{v^2} is the mean of the squared molecular speeds.

Kinetic Interpretation of Temperature

Temperature and internal energy

  • Internal energy: In an ideal gas, internal energy is entirely the kinetic energy of its molecules.
  • Ideal-gas equation: PV=NkBTPV=Nk_BT, where kBk_B is Boltzmann's constant.
  • Energy relation: Combining the pressure relation with the ideal-gas equation gives the total internal energy and the mean kinetic energy per molecule.
  • Key conclusion: Mean molecular kinetic energy depends only on absolute temperature—not on gas pressure, volume, or chemical identity.
E=32NkBT,⟨KE⟩=EN=12mv2‾=32kBTE=\frac{3}{2}Nk_BT,\qquad \langle KE\rangle=\frac{E}{N}=\frac{1}{2}m\overline{v^2}=\frac{3}{2}k_BT
For NN molecules, E=N⟨KE⟩E=N\langle KE\rangle.

Mixture of Ideal Gases

Partial pressures and equipartition

  • Mixture: For non-reactive ideal gases, each species contributes to the total pressure according to its molecular motion.
  • Thermal equilibrium: Molecules of different gases at the same temperature have equal average translational kinetic energy, even though their masses and typical speeds may differ.
  • Dalton’s law: The mixture pressure equals the sum of the partial pressures of its constituent gases.
P=13∑inimivi2‾=∑inikBTP=\frac{1}{3}\sum_i n_i m_i\overline{v_i^2}=\sum_i n_i k_BT
For species ii with number of molecules nin_i and molecular mass mim_i, the total pressure follows from their summed contributions.
12m1v12‾=12m2v22‾=32kBT\frac{1}{2}m_1\overline{v_1^2}=\frac{1}{2}m_2\overline{v_2^2}=\frac{3}{2}k_BT
The mean translational kinetic energy is the same for each gas species in thermal equilibrium.

Root Mean Square Speed

Definition

Root mean square (rms) speed — The square root of the mean of the squares of molecular speeds is called the rms speed.

RMS speed
vrms=v2‾=3kBTm=3RTM0v_{\mathrm{rms}}=\sqrt{\overline{v^2}}=\sqrt{\frac{3k_BT}{m}}=\sqrt{\frac{3RT}{M_0}}

Use mm for molecular mass or M0M_0 for molar mass.

Maxwellian Distribution of Molecular Speeds

Meaning and distribution function

  • Changing speeds: Collisions continually change individual molecular speeds, but at fixed thermodynamic conditions the overall speed distribution remains steady.
  • Maxwell distribution: It describes the fraction of molecules occupying each speed interval; the speed of any one molecule may change.
  • Variables: dNdN is the number of molecules with speeds from vv to v+dvv+dv; NN is total molecule count, MM is molar mass, and TT is temperature in kelvin.
dN=4πN(M2πRT)3/2v2e−Mv2/(2RT) dvdN=4\pi N\left(\frac{M}{2\pi RT}\right)^{3/2}v^2e^{-Mv^2/(2RT)}\,dv
This form gives the number of molecules in the interval vv to v+dvv+dv.

Reading the distribution graph

  • Axes: Plot 1NdNdv\frac{1}{N}\frac{dN}{dv} against speed vv; the ordinate is the fraction of molecules per unit speed interval.
  • Total area: The area under the normalized curve is 11; the area between two speeds is the fraction of molecules in that interval.
  • Unnormalized graph: For a plot of dN/dvdN/dv against vv, the total area gives the total number of molecules.
  • Shape: The curve is asymmetric about its peak; very low and very high speeds occur in small fractions of molecules.
Maxwell speed distribution curve showing most probable, average, and rms speeds.
Maxwell speed distribution curve showing most probable, average, and rms speeds.
Molecular speed distribution showing the most probable speed v_mp and rms speed v_rms.
Molecular speed distribution showing the most probable speed vmpv_{mp} and rms speed vrmsv_{rms}.

Characteristic Molecular Speeds

Definition

Most probable speed — The speed corresponding to the peak of the Maxwell distribution, possessed by the largest number of molecules.

Most probable speed
vmp=2kBTm=2RTM0v_{mp}=\sqrt{\frac{2k_BT}{m}}=\sqrt{\frac{2RT}{M_0}}

Use molecular mass mm or molar mass M0M_0.

Definition

Average speed — The arithmetic mean of the speeds of all gas molecules at a given temperature.

Average speed
vav=v1+v2+⋯+vNN=8kBTπm=8RTπM0v_{av}=\frac{v_1+v_2+\cdots+v_N}{N}=\sqrt{\frac{8k_BT}{\pi m}}=\sqrt{\frac{8RT}{\pi M_0}}

The first expression is the arithmetic mean; the equivalent thermal formula uses molecular or molar mass.

Characteristic speeds
SpeedMeaningValue
Most probable, vmpv_{mp}Speed at the distribution peak2kBT/m\sqrt{2k_BT/m}
Average, vavv_{av}Arithmetic mean of molecular speeds8kBT/(πm)\sqrt{8k_BT/(\pi m)}
RMS, vrmsv_{rms}Square root of the mean squared speed3kBT/m\sqrt{3k_BT/m}
★ Remember
  • For a Maxwell distribution: vrms>vav>vmpv_{rms}>v_{av}>v_{mp}.

What is the kinetic interpretation of temperature for an ideal gas?

Answer: The average translational kinetic energy per molecule is ⟨KE⟩=32kBT\langle KE\rangle=\frac{3}{2}k_BT, so it is proportional to absolute temperature.

State Dalton’s law for a mixture of non-reactive ideal gases.

Answer: The total pressure is the sum of the partial pressures: P=∑inikBTP=\sum_i n_i k_BT.

How do the three characteristic speeds compare?

Answer: vrms>vav>vmpv_{rms}>v_{av}>v_{mp}.

Quick recap

  • Ideal-gas molecules move randomly, collide elastically, and interact only during collisions.
  • Gas pressure arises from molecular momentum transfer: P=13ρv2‾P=\frac{1}{3}\rho\overline{v^2}.
  • Ideal-gas internal energy is kinetic: E=32NkBTE=\frac{3}{2}Nk_BT.
  • At thermal equilibrium, different gas species have the same mean kinetic energy; mixture pressures add.
  • The Maxwell distribution gives the fraction of molecules across speed intervals and has normalized area 11.
  • Characteristic speeds obey vrms>vav>vmpv_{rms}>v_{av}>v_{mp}.
Lecture 4

Law of Equipartition of Energy

Law of Equipartition

  • Equipartition: In thermal equilibrium, energy is shared equally among the available degrees of freedom.
  • Energy per mode: Each translational or rotational degree of freedom contributes an average frac{1}{2}k_BT; each vibrational mode contributes an average k_BT.

Monoatomic Molecule

  • Degrees of freedom: A monoatomic molecule has three translational degrees of freedom, one along each spatial axis.
  • Average energy: Its kinetic energy is \E=\\frac{3}{2}k_BT\ per molecule, or \U=\\frac{3}{2}RT\ per mole.

Diatomic Molecule

  • Degrees of freedom: A rigid diatomic molecule has three translational and two rotational degrees of freedom; vibration is neglected.
  • Average energy: Its energy is \E=\\frac{5}{2}k_BT\ per molecule, or \U=\\frac{5}{2}RT\ per mole.

Vibrational Energy in a Diatomic Molecule

⚠ Common mistake

Do not count a vibrational frequency as only one 12kBT\frac{1}{2}k_BT contribution: it contains both kinetic and potential terms, so its total is kBTk_BT.

Quick recap

  • Each independent translational or rotational degree of freedom contributes 12kBT\frac{1}{2}k_BT per molecule.
  • Each vibrational frequency contributes kBTk_BT because it has kinetic and potential parts.
  • A monoatomic molecule has average energy 32kBT\frac{3}{2}k_BT.
  • A non-vibrating diatomic molecule has average energy 52kBT\frac{5}{2}k_BT.
  • Including one vibrational frequency gives a diatomic molecule average energy 72kBT\frac{7}{2}k_BT.
Lecture 5

Specific Heat Capacity

Definition

Molar heat capacity — The heat required to raise the temperature of one mole of a substance by one unit. For an ideal gas, CV=dU/dTC_V = dU/dT at constant volume.

Monoatomic Gases

  • Degrees of freedom: A monoatomic gas has f=3f=3 translational degrees of freedom.
  • Internal energy: For one mole, U=32RTU=\frac{3}{2}RT.
  • Heat capacities: CV=32RC_V=\frac{3}{2}R; using CP−CV=RC_P-C_V=R, CP=52RC_P=\frac{5}{2}R.
  • Heat-capacity ratio: γ=CP/CV=53\gamma=C_P/C_V=\frac{5}{3}.
Molar internal energy of a monoatomic gas
U=32RTU=\frac{3}{2}RT

Diatomic Gases

  • Rigid diatomic molecule: It has f=5f=5 degrees of freedom in this model.
  • Internal energy: For one mole, U=52RTU=\frac{5}{2}RT, so CV=52RC_V=\frac{5}{2}R.
  • Constant-pressure heat capacity: CP=CV+R=72RC_P=C_V+R=\frac{7}{2}R.
  • Heat-capacity ratio: γ=CPCV=75\gamma=\frac{C_P}{C_V}=\frac{7}{5}.
Molar internal energy of a rigid diatomic gas
U=52RTU=\frac{5}{2}RT

Diatomic Gases with a Vibrational Mode

  • Vibrational contribution: One vibrational mode adds kBTk_BT per molecule to the energy.
  • Internal energy: For one mole, U=72RTU=\frac{7}{2}RT; hence CV=72RC_V=\frac{7}{2}R.
  • Heat capacity and ratio: CP=92RC_P=\frac{9}{2}R and γ=97\gamma=\frac{9}{7}.
Molar internal energy with one vibrational mode
U=72RTU=\frac{7}{2}RT

Polyatomic Gases

  • Energy contributions: The given model includes translational energy, rotational energy, and ff vibrational contributions.
  • Internal energy: For one mole, U=(3+f)RTU=(3+f)RT.
  • Heat capacities: CV=(3+f)RC_V=(3+f)R and, since CP−CV=RC_P-C_V=R, CP=(4+f)RC_P=(4+f)R.
  • Heat-capacity ratio: γ=CPCV=4+f3+f\gamma=\frac{C_P}{C_V}=\frac{4+f}{3+f}.
Polyatomic gas heat-capacity ratio
γ=4+f3+f\gamma=\frac{4+f}{3+f}

Specific Heat Capacity of Solids

  • Model: Each atom in a solid vibrates about its mean position.
  • One-dimensional oscillator: Its average energy is 2×12kBT=kBT2\times\frac{1}{2}k_BT=k_BT.
  • Three dimensions: The average energy per atom is 3kBT3k_BT.
  • One mole of solid: With N=NAN=N_A, total energy is U=3RTU=3RT.
  • Heat capacity: Since the solid does no work in this model, ΔW=0\Delta W=0 and C=ΔQΔT=ΔUΔT=3RC=\frac{\Delta Q}{\Delta T}=\frac{\Delta U}{\Delta T}=3R.
Molar heat capacity of a solid
C=3RC=3R

For the stated model of vibrating atoms.

State the values of CVC_V, CPC_P, and γ\gamma for a rigid diatomic gas.

Answer: CV=52RC_V=\frac{5}{2}R, CP=72RC_P=\frac{7}{2}R, and γ=75\gamma=\frac{7}{5}.

What is the molar heat capacity of a solid in the vibrating-atom model?

Answer: C=3RC=3R.

Quick recap

  • For ideal gases, CP−CV=RC_P-C_V=R.
  • Monoatomic gas: CV=32RC_V=\frac{3}{2}R, CP=52RC_P=\frac{5}{2}R, and γ=53\gamma=\frac{5}{3}.
  • Rigid diatomic gas: CV=52RC_V=\frac{5}{2}R, CP=72RC_P=\frac{7}{2}R, and γ=75\gamma=\frac{7}{5}.
  • A diatomic gas with one vibrational mode has CV=72RC_V=\frac{7}{2}R, CP=92RC_P=\frac{9}{2}R, and γ=97\gamma=\frac{9}{7}.
  • For the polyatomic-gas model, CV=(3+f)RC_V=(3+f)R, CP=(4+f)RC_P=(4+f)R, and γ=4+f3+f\gamma=\frac{4+f}{3+f}.
  • For a mole of solid in the stated oscillator model, U=3RTU=3RT and C=3RC=3R.
Lecture 6

Mean Free Path

Collision Model and Mean Free Path

Definition

Mean free path — The mean free path (λ\lambda) is the average distance a gas molecule travels between successive collisions.

  • Model: Treat gas molecules as hard spheres of diameter dd; the effective collision area is πd2\pi d^2.
  • Number density: If NN molecules occupy volume VV, their number per unit volume is n=N/Vn=N/V.
  • Collision cylinder: In time tt, a molecule moving at speed vv sweeps a cylindrical volume of V=πd2vtV=\pi d^2vt.
  • Molecules in cylinder: The number of molecules in this volume is N=nπd2vtN=n\pi d^2vt.
  • Mean free path: Distance travelled divided by the number of collisions gives the simple-model result.
Molecular collisions and the effective collision area used to derive mean free path.
Molecular collisions and the effective collision area used to derive mean free path.
λ=vtnπd2vt=1nπd2\lambda=\frac{vt}{n\pi d^2vt}=\frac{1}{n\pi d^2}
Hard-sphere molecules of diameter d inside a cylindrical volume.
Hard-sphere molecules of diameter dd inside a cylindrical volume.
  • All-molecule motion: When the motion of all molecules is considered, the more exact expression includes a factor of 2\sqrt{2}.
  • Dependence: Mean free path decreases as number density nn or molecular diameter dd increases.
Mean free path considering all molecules
λ=12nπd2\lambda=\frac{1}{\sqrt{2}n\pi d^2}

Use this expression when accounting for the motion of all gas molecules.

Avogadro’s Number

Definition

Avogadro’s number — The number of units in one mole of a substance is Avogadro’s number; the units may be electrons, ions, atoms, or molecules, depending on the substance.

Avogadro’s number
NA=6.022140857×1023N_A=6.022140857\times10^{23}

Its value is approximately 6.022140857×10236.022140857\times10^{23} units per mole.

Quick recap

  • Mean free path is the average distance between successive molecular collisions.
  • For hard spheres of diameter dd, the effective collision area is πd2\pi d^2.
  • The swept collision-cylinder volume is V=πd2vtV=\pi d^2vt, containing N=nπd2vtN=n\pi d^2vt molecules.
  • The simple model gives λ=1/(nπd2)\lambda=1/(n\pi d^2); accounting for all molecules gives λ=1/(2nπd2)\lambda=1/(\sqrt{2}n\pi d^2).
  • Avogadro’s number is 6.022140857×10236.022140857\times10^{23} units per mole; the units can be electrons, ions, atoms, or molecules.

NEET Physics — ALL CHAPTERS

1

Basic Mathematics

View

2

Units and Measurement

View

3

Motion in a Straight Line

View

4

Motion in a Plane

View

5

Laws of Motion

View

6

Work, Energy and Power

View

7

System of Particles and Rotational Motion

View

8

Gravitation

View

9

Mechanical Properties of Solids

View

10

Mechanical Properties of Fluids

View

11

Thermal Properties of Matter

View

12

Thermodynamics

View

13

Kinetic Theory

View

14

Oscillations

View

15

Waves

View

16

Electric Charges and Fields

View

17

Electrostatic Potential and Capacitance

View

18

Current Electricity

View

19

Moving Charges and Magnetism

View

20

Magnetism and Matter

View

21

Electromagnetic Induction

View

22

Alternating Current

View

23

Electromagnetic Waves

View

24

Ray Optics and Optical Instruments

View

25

Wave Optics

View

26

Dual Nature of Radiation and Matter

View

27

Atoms

View

28

Nuclei

View

29

Semiconductor Electronics: Materials, Devices and Simple Circuits

View